From a2b773e09e3c5bde3deaafaed2fe248ebd350efb Mon Sep 17 00:00:00 2001
From: David Seifert <soap@gentoo.org>
Date: Mon, 22 May 2023 18:26:14 +0200
Subject: app-shells/bash: remove ${USERLAND}

Signed-off-by: David Seifert <soap@gentoo.org>
---
 app-shells/bash/bash-5.0_p18-r1.ebuild | 277 +++++++++++++++++++++++++
 app-shells/bash/bash-5.0_p18.ebuild    | 277 -------------------------
 app-shells/bash/bash-5.1_p16-r2.ebuild | 313 -----------------------------
 app-shells/bash/bash-5.1_p16-r3.ebuild | 315 -----------------------------
 app-shells/bash/bash-5.1_p16-r4.ebuild | 313 +++++++++++++++++++++++++++++
 app-shells/bash/bash-5.1_p16-r5.ebuild | 315 +++++++++++++++++++++++++++++
 app-shells/bash/bash-5.2_p15-r2.ebuild | 355 ---------------------------------
 app-shells/bash/bash-5.2_p15-r3.ebuild | 355 +++++++++++++++++++++++++++++++++
 app-shells/bash/bash-9999.ebuild       |   2 +-
 9 files changed, 1261 insertions(+), 1261 deletions(-)
 create mode 100644 app-shells/bash/bash-5.0_p18-r1.ebuild
 delete mode 100644 app-shells/bash/bash-5.0_p18.ebuild
 delete mode 100644 app-shells/bash/bash-5.1_p16-r2.ebuild
 delete mode 100644 app-shells/bash/bash-5.1_p16-r3.ebuild
 create mode 100644 app-shells/bash/bash-5.1_p16-r4.ebuild
 create mode 100644 app-shells/bash/bash-5.1_p16-r5.ebuild
 delete mode 100644 app-shells/bash/bash-5.2_p15-r2.ebuild
 create mode 100644 app-shells/bash/bash-5.2_p15-r3.ebuild

(limited to 'app-shells')

diff --git a/app-shells/bash/bash-5.0_p18-r1.ebuild b/app-shells/bash/bash-5.0_p18-r1.ebuild
new file mode 100644
index 000000000000..704cb5b5fbe4
--- /dev/null
+++ b/app-shells/bash/bash-5.0_p18-r1.ebuild
@@ -0,0 +1,277 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+inherit flag-o-matic toolchain-funcs prefix
+
+# Uncomment if we have a patchset
+GENTOO_PATCH_DEV="sam"
+GENTOO_PATCH_VER="${PV}"
+
+# Official patchlevel
+# See ftp://ftp.cwru.edu/pub/bash/bash-5.0-patches/
+PLEVEL="${PV##*_p}"
+MY_PV="${PV/_p*}"
+MY_PV="${MY_PV/_/-}"
+MY_P="${PN}-${MY_PV}"
+is_release() {
+	case ${PV} in
+	*_alpha*|*_beta*|*_rc*) return 1 ;;
+	*) return 0 ;;
+	esac
+}
+[[ ${PV} != *_p* ]] && PLEVEL=0
+patches() {
+	local opt=${1} plevel=${2:-${PLEVEL}} pn=${3:-${PN}} pv=${4:-${MY_PV}}
+	[[ ${plevel} -eq 0 ]] && return 1
+	eval set -- {1..${plevel}}
+	set -- $(printf "${pn}${pv/\.}-%03d " "$@")
+	if [[ ${opt} == -s ]] ; then
+		echo "${@/#/${DISTDIR}/}"
+	else
+		local u
+		for u in ftp://ftp.cwru.edu/pub/bash mirror://gnu/${pn} ; do
+			printf "${u}/${pn}-${pv}-patches/%s " "$@"
+		done
+	fi
+}
+
+# The version of readline this bash normally ships with.
+READLINE_VER="8.0"
+
+DESCRIPTION="The standard GNU Bourne again shell"
+HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html"
+if is_release ; then
+	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz $(patches)"
+else
+	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
+fi
+
+if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
+fi
+
+LICENSE="GPL-3"
+SLOT="0"
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
+
+DEPEND="
+	>=sys-libs/ncurses-5.2-r2:0=
+	nls? ( virtual/libintl )
+	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
+"
+RDEPEND="
+	${DEPEND}
+"
+# We only need yacc when the .y files get patched (bash42-005)
+#BDEPEND="app-alternatives/yacc"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+	# Patches from Chet sent to bashbug ml
+	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-history-append.patch
+	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-syslog-history-extern.patch
+)
+
+pkg_setup() {
+	# bug #7332
+	if is-flag -malign-double ; then
+		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
+		eerror "as it breaks LFS (struct stat64) on x86."
+		die "remove -malign-double from your CFLAGS mr ricer"
+	fi
+
+	if use bashlogger ; then
+		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
+		ewarn "This will log ALL output you enter into the shell, you have been warned."
+	fi
+}
+
+src_unpack() {
+	unpack ${MY_P}.tar.gz
+
+	if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+		unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
+	fi
+}
+
+src_prepare() {
+	# Include official patches
+	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 $(patches -s)
+
+	# Clean out local libs so we know we use system ones w/releases.
+	if is_release ; then
+		rm -rf lib/{readline,termcap}/* || die
+		touch lib/{readline,termcap}/Makefile.in || die # for config.status
+		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
+	fi
+
+	# Prefixify hardcoded path names. No-op for non-prefix.
+	hprefixify pathnames.h.in
+
+	# Avoid regenerating docs after patches, bug #407985
+	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
+	touch -r . doc/* || die
+
+	eapply -p0 "${PATCHES[@]}"
+	eapply_user
+}
+
+src_configure() {
+	local myconf=(
+		--disable-profiling
+
+		# Force linking with system curses ... the bundled termcap lib
+		# sucks bad compared to ncurses.  For the most part, ncurses
+		# is here because readline needs it.  But bash itself calls
+		# ncurses in one or two small places :(.
+		--with-curses
+
+		$(use_enable mem-scramble)
+		$(use_enable net net-redirections)
+		$(use_enable readline)
+		$(use_enable readline bang-history)
+		$(use_enable readline history)
+		$(use_with afs)
+		$(use_with mem-scramble bash-malloc)
+	)
+
+	# For descriptions of these, see config-top.h
+	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
+	append-cppflags \
+		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
+		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
+		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
+		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
+		-DNON_INTERACTIVE_LOGIN_SHELLS \
+		-DSSH_SOURCE_BASHRC \
+		$(use bashlogger && echo -DSYSLOG_HISTORY)
+
+	# Don't even think about building this statically without
+	# reading bug #7714 first.  If you still build it statically,
+	# don't come crying to us with bugs ;).
+	#use static && export LDFLAGS="${LDFLAGS} -static"
+	use nls || myconf+=( --disable-nls )
+
+	# Historically, we always used the builtin readline, but since
+	# our handling of SONAME upgrades has gotten much more stable
+	# in the PM (and the readline ebuild itself preserves the old
+	# libs during upgrades), linking against the system copy should
+	# be safe.
+	# Exact cached version here doesn't really matter as long as it
+	# is at least what's in the DEPEND up above.
+	export ac_cv_rl_version=${READLINE_VER%%_*}
+
+	if is_release ; then
+		# Use system readline only with released versions.
+		myconf+=( --with-installed-readline=. )
+	fi
+
+	if use plugins ; then
+		append-ldflags -Wl,-rpath,/usr/$(get_libdir)/bash
+	else
+		# Disable the plugins logic by hand since bash doesn't
+		# provide a way of doing it.
+		export ac_cv_func_dl{close,open,sym}=no \
+			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
+
+		sed -i \
+			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
+			configure || die
+	fi
+
+	# bug #444070
+	tc-export AR
+
+	econf "${myconf[@]}"
+}
+
+src_compile() {
+	emake
+
+	if use plugins ; then
+		emake -C examples/loadables all others
+	fi
+}
+
+src_install() {
+	local d f
+
+	default
+
+	dodir /bin
+	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
+	dosym bash /bin/rbash
+
+	insinto /etc/bash
+	doins "${FILESDIR}"/bash_logout
+	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
+
+	keepdir /etc/bash/bashrc.d
+
+	insinto /etc/skel
+	for f in bash{_logout,_profile,rc} ; do
+		newins "${FILESDIR}"/dot-${f} .${f}
+	done
+
+	local sed_args=(
+		-e 's:#GNU#@::'
+		-e '/#@/d'
+	)
+
+	if ! use readline ; then
+		# bug #432338
+		sed_args+=(
+			-e '/^shopt -s histappend/s:^:#:'
+			-e 's:use_color=true:use_color=false:'
+		)
+	fi
+
+	sed -i \
+		"${sed_args[@]}" \
+		"${ED}"/etc/skel/.bashrc \
+		"${ED}"/etc/bash/bashrc || die
+
+	if use plugins ; then
+		exeinto /usr/$(get_libdir)/bash
+		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
+
+		insinto /usr/include/bash-plugins
+		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
+	fi
+
+	if use examples ; then
+		for d in examples/{functions,misc,scripts,startup-files} ; do
+			exeinto /usr/share/doc/${PF}/${d}
+			docinto ${d}
+			for f in ${d}/* ; do
+				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
+					doexe ${f}
+				else
+					dodoc ${f}
+				fi
+			done
+		done
+	fi
+
+	doman doc/*.1
+	newdoc CWRU/changelog ChangeLog
+	dosym bash.info /usr/share/info/bashref.info
+}
+
+pkg_preinst() {
+	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
+		mkdir -p "${EROOT}"/etc/bash
+		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
+	fi
+}
+
+pkg_postinst() {
+	# If /bin/sh does not exist, provide it
+	if [[ ! -e ${EROOT}/bin/sh ]] ; then
+		ln -sf bash "${EROOT}"/bin/sh
+	fi
+}
diff --git a/app-shells/bash/bash-5.0_p18.ebuild b/app-shells/bash/bash-5.0_p18.ebuild
deleted file mode 100644
index 23ec36757da4..000000000000
--- a/app-shells/bash/bash-5.0_p18.ebuild
+++ /dev/null
@@ -1,277 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-inherit flag-o-matic toolchain-funcs prefix
-
-# Uncomment if we have a patchset
-GENTOO_PATCH_DEV="sam"
-GENTOO_PATCH_VER="${PV}"
-
-# Official patchlevel
-# See ftp://ftp.cwru.edu/pub/bash/bash-5.0-patches/
-PLEVEL="${PV##*_p}"
-MY_PV="${PV/_p*}"
-MY_PV="${MY_PV/_/-}"
-MY_P="${PN}-${MY_PV}"
-is_release() {
-	case ${PV} in
-	*_alpha*|*_beta*|*_rc*) return 1 ;;
-	*) return 0 ;;
-	esac
-}
-[[ ${PV} != *_p* ]] && PLEVEL=0
-patches() {
-	local opt=${1} plevel=${2:-${PLEVEL}} pn=${3:-${PN}} pv=${4:-${MY_PV}}
-	[[ ${plevel} -eq 0 ]] && return 1
-	eval set -- {1..${plevel}}
-	set -- $(printf "${pn}${pv/\.}-%03d " "$@")
-	if [[ ${opt} == -s ]] ; then
-		echo "${@/#/${DISTDIR}/}"
-	else
-		local u
-		for u in ftp://ftp.cwru.edu/pub/bash mirror://gnu/${pn} ; do
-			printf "${u}/${pn}-${pv}-patches/%s " "$@"
-		done
-	fi
-}
-
-# The version of readline this bash normally ships with.
-READLINE_VER="8.0"
-
-DESCRIPTION="The standard GNU Bourne again shell"
-HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html"
-if is_release ; then
-	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz $(patches)"
-else
-	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
-fi
-
-if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
-fi
-
-LICENSE="GPL-3"
-SLOT="0"
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
-
-DEPEND="
-	>=sys-libs/ncurses-5.2-r2:0=
-	nls? ( virtual/libintl )
-	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
-"
-RDEPEND="
-	${DEPEND}
-"
-# We only need yacc when the .y files get patched (bash42-005)
-#BDEPEND="app-alternatives/yacc"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
-	# Patches from Chet sent to bashbug ml
-	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-history-append.patch
-	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-syslog-history-extern.patch
-)
-
-pkg_setup() {
-	# bug #7332
-	if is-flag -malign-double ; then
-		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
-		eerror "as it breaks LFS (struct stat64) on x86."
-		die "remove -malign-double from your CFLAGS mr ricer"
-	fi
-
-	if use bashlogger ; then
-		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
-		ewarn "This will log ALL output you enter into the shell, you have been warned."
-	fi
-}
-
-src_unpack() {
-	unpack ${MY_P}.tar.gz
-
-	if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-		unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
-	fi
-}
-
-src_prepare() {
-	# Include official patches
-	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 $(patches -s)
-
-	# Clean out local libs so we know we use system ones w/releases.
-	if is_release ; then
-		rm -rf lib/{readline,termcap}/* || die
-		touch lib/{readline,termcap}/Makefile.in || die # for config.status
-		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
-	fi
-
-	# Prefixify hardcoded path names. No-op for non-prefix.
-	hprefixify pathnames.h.in
-
-	# Avoid regenerating docs after patches, bug #407985
-	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
-	touch -r . doc/* || die
-
-	eapply -p0 "${PATCHES[@]}"
-	eapply_user
-}
-
-src_configure() {
-	local myconf=(
-		--disable-profiling
-
-		# Force linking with system curses ... the bundled termcap lib
-		# sucks bad compared to ncurses.  For the most part, ncurses
-		# is here because readline needs it.  But bash itself calls
-		# ncurses in one or two small places :(.
-		--with-curses
-
-		$(use_enable mem-scramble)
-		$(use_enable net net-redirections)
-		$(use_enable readline)
-		$(use_enable readline bang-history)
-		$(use_enable readline history)
-		$(use_with afs)
-		$(use_with mem-scramble bash-malloc)
-	)
-
-	# For descriptions of these, see config-top.h
-	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
-	append-cppflags \
-		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
-		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
-		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
-		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
-		-DNON_INTERACTIVE_LOGIN_SHELLS \
-		-DSSH_SOURCE_BASHRC \
-		$(use bashlogger && echo -DSYSLOG_HISTORY)
-
-	# Don't even think about building this statically without
-	# reading bug #7714 first.  If you still build it statically,
-	# don't come crying to us with bugs ;).
-	#use static && export LDFLAGS="${LDFLAGS} -static"
-	use nls || myconf+=( --disable-nls )
-
-	# Historically, we always used the builtin readline, but since
-	# our handling of SONAME upgrades has gotten much more stable
-	# in the PM (and the readline ebuild itself preserves the old
-	# libs during upgrades), linking against the system copy should
-	# be safe.
-	# Exact cached version here doesn't really matter as long as it
-	# is at least what's in the DEPEND up above.
-	export ac_cv_rl_version=${READLINE_VER%%_*}
-
-	if is_release ; then
-		# Use system readline only with released versions.
-		myconf+=( --with-installed-readline=. )
-	fi
-
-	if use plugins ; then
-		append-ldflags -Wl,-rpath,/usr/$(get_libdir)/bash
-	else
-		# Disable the plugins logic by hand since bash doesn't
-		# provide a way of doing it.
-		export ac_cv_func_dl{close,open,sym}=no \
-			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
-
-		sed -i \
-			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
-			configure || die
-	fi
-
-	# bug #444070
-	tc-export AR
-
-	econf "${myconf[@]}"
-}
-
-src_compile() {
-	emake
-
-	if use plugins ; then
-		emake -C examples/loadables all others
-	fi
-}
-
-src_install() {
-	local d f
-
-	default
-
-	dodir /bin
-	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
-	dosym bash /bin/rbash
-
-	insinto /etc/bash
-	doins "${FILESDIR}"/bash_logout
-	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
-
-	keepdir /etc/bash/bashrc.d
-
-	insinto /etc/skel
-	for f in bash{_logout,_profile,rc} ; do
-		newins "${FILESDIR}"/dot-${f} .${f}
-	done
-
-	local sed_args=(
-		-e "s:#${USERLAND}#@::"
-		-e '/#@/d'
-	)
-
-	if ! use readline ; then
-		# bug #432338
-		sed_args+=(
-			-e '/^shopt -s histappend/s:^:#:'
-			-e 's:use_color=true:use_color=false:'
-		)
-	fi
-
-	sed -i \
-		"${sed_args[@]}" \
-		"${ED}"/etc/skel/.bashrc \
-		"${ED}"/etc/bash/bashrc || die
-
-	if use plugins ; then
-		exeinto /usr/$(get_libdir)/bash
-		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
-
-		insinto /usr/include/bash-plugins
-		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
-	fi
-
-	if use examples ; then
-		for d in examples/{functions,misc,scripts,startup-files} ; do
-			exeinto /usr/share/doc/${PF}/${d}
-			docinto ${d}
-			for f in ${d}/* ; do
-				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
-					doexe ${f}
-				else
-					dodoc ${f}
-				fi
-			done
-		done
-	fi
-
-	doman doc/*.1
-	newdoc CWRU/changelog ChangeLog
-	dosym bash.info /usr/share/info/bashref.info
-}
-
-pkg_preinst() {
-	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
-		mkdir -p "${EROOT}"/etc/bash
-		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
-	fi
-}
-
-pkg_postinst() {
-	# If /bin/sh does not exist, provide it
-	if [[ ! -e ${EROOT}/bin/sh ]] ; then
-		ln -sf bash "${EROOT}"/bin/sh
-	fi
-}
diff --git a/app-shells/bash/bash-5.1_p16-r2.ebuild b/app-shells/bash/bash-5.1_p16-r2.ebuild
deleted file mode 100644
index a9b7b120cc74..000000000000
--- a/app-shells/bash/bash-5.1_p16-r2.ebuild
+++ /dev/null
@@ -1,313 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/chetramey.asc
-inherit flag-o-matic toolchain-funcs prefix verify-sig
-
-# Uncomment if we have a patchset
-GENTOO_PATCH_DEV="sam"
-GENTOO_PATCH_VER="${PV}"
-
-# Official patchlevel
-# See ftp://ftp.cwru.edu/pub/bash/bash-5.1-patches/
-PLEVEL="${PV##*_p}"
-MY_PV="${PV/_p*}"
-MY_PV="${MY_PV/_/-}"
-MY_P="${PN}-${MY_PV}"
-MY_PATCHES=()
-
-is_release() {
-	case ${PV} in
-		*_alpha*|*_beta*|*_rc*)
-			return 1
-			;;
-		*)
-			return 0
-			;;
-	esac
-}
-
-[[ ${PV} != *_p* ]] && PLEVEL=0
-
-# The version of readline this bash normally ships with.
-READLINE_VER="8.1"
-
-DESCRIPTION="The standard GNU Bourne again shell"
-HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html"
-
-if is_release ; then
-	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz"
-	SRC_URI+=" verify-sig? ( mirror://gnu/bash/${MY_P}.tar.gz.sig )"
-
-	if [[ ${PLEVEL} -gt 0 ]] ; then
-		# bash-5.1 -> bash51
-		my_p=${PN}$(ver_rs 1-2 '' $(ver_cut 1-2))
-
-	        patch_url=
-		my_patch_index=
-
-		for ((my_patch_index=1; my_patch_index <= ${PLEVEL} ; my_patch_index++)) ; do
-			for url in mirror://gnu/${pn} ftp://ftp.cwru.edu/pub/bash ; do
-				patch_url=$(printf "${url}/${PN}-$(ver_cut 1-2)-patches/${my_p}-%03d" ${my_patch_index})
-				SRC_URI+=" ${patch_url}"
-				SRC_URI+=" verify-sig? ( ${patch_url}.sig )"
-
-			done
-
-			MY_PATCHES+=( "${DISTDIR}"/$(printf ${my_p}-%03d ${my_patch_index}) )
-		done
-
-		unset my_pn patch_url my_patch_index
-	fi
-else
-	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
-	SRC_URI+=" verify-sig? ( ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz.sig )"
-fi
-
-if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
-fi
-
-LICENSE="GPL-3"
-SLOT="0"
-[[ "${PV}" == *_rc* ]] || \
-KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
-
-DEPEND="
-	>=sys-libs/ncurses-5.2-r2:0=
-	nls? ( virtual/libintl )
-	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
-"
-RDEPEND="
-	${DEPEND}
-"
-# We only need yacc when the .y files get patched (bash42-005, bash51-011)
-BDEPEND="app-alternatives/yacc
-	verify-sig? ( sec-keys/openpgp-keys-chetramey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
-	# Patches from Chet sent to bashbug ml
-	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-syslog-history-extern.patch
-)
-
-pkg_setup() {
-	# bug #7332
-	if is-flag -malign-double ; then
-		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
-		eerror "as it breaks LFS (struct stat64) on x86."
-		die "remove -malign-double from your CFLAGS mr ricer"
-	fi
-
-	if use bashlogger ; then
-		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
-		ewarn "This will log ALL output you enter into the shell, you have been warned."
-	fi
-}
-
-src_unpack() {
-	if [[ ${PV} == 9999 ]] ; then
-		git-r3_src_unpack
-	else
-		if use verify-sig ; then
-			verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.gz{,.sig}
-
-			local patch
-			for patch in "${MY_PATCHES[@]}" ; do
-				verify-sig_verify_detached ${patch}{,.sig}
-			done
-		fi
-
-		unpack ${MY_P}.tar.gz
-
-		if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-			unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
-		fi
-	fi
-}
-
-src_prepare() {
-	# Include official patches
-	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 "${MY_PATCHES[@]}"
-
-	# Clean out local libs so we know we use system ones w/releases.
-	if is_release ; then
-		rm -rf lib/{readline,termcap}/* || die
-		touch lib/{readline,termcap}/Makefile.in || die # for config.status
-		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
-	fi
-
-	# Prefixify hardcoded path names. No-op for non-prefix.
-	hprefixify pathnames.h.in
-
-	# Avoid regenerating docs after patches, bug #407985
-	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
-	touch -r . doc/* || die
-
-	eapply -p0 "${PATCHES[@]}"
-	eapply_user
-}
-
-src_configure() {
-	local myconf=(
-		--disable-profiling
-
-		# Force linking with system curses ... the bundled termcap lib
-		# sucks bad compared to ncurses.  For the most part, ncurses
-		# is here because readline needs it.  But bash itself calls
-		# ncurses in one or two small places :(.
-		--with-curses
-
-		$(use_enable mem-scramble)
-		$(use_enable net net-redirections)
-		$(use_enable readline)
-		$(use_enable readline bang-history)
-		$(use_enable readline history)
-		$(use_with afs)
-		$(use_with mem-scramble bash-malloc)
-	)
-
-	# For descriptions of these, see config-top.h
-	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
-	append-cppflags \
-		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
-		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
-		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
-		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
-		-DNON_INTERACTIVE_LOGIN_SHELLS \
-		-DSSH_SOURCE_BASHRC \
-		$(use bashlogger && echo -DSYSLOG_HISTORY)
-
-	# Don't even think about building this statically without
-	# reading bug #7714 first.  If you still build it statically,
-	# don't come crying to us with bugs ;).
-	#use static && export LDFLAGS="${LDFLAGS} -static"
-	use nls || myconf+=( --disable-nls )
-
-	# Historically, we always used the builtin readline, but since
-	# our handling of SONAME upgrades has gotten much more stable
-	# in the PM (and the readline ebuild itself preserves the old
-	# libs during upgrades), linking against the system copy should
-	# be safe.
-	# Exact cached version here doesn't really matter as long as it
-	# is at least what's in the DEPEND up above.
-	export ac_cv_rl_version=${READLINE_VER%%_*}
-
-	if is_release ; then
-		# Use system readline only with released versions.
-		myconf+=( --with-installed-readline=. )
-	fi
-
-	if use plugins ; then
-		append-ldflags -Wl,-rpath,"${EPREFIX}"/usr/$(get_libdir)/bash
-	else
-		# Disable the plugins logic by hand since bash doesn't
-		# provide a way of doing it.
-		export ac_cv_func_dl{close,open,sym}=no \
-			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
-
-		sed -i \
-			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
-			configure || die
-	fi
-
-	# bug #444070
-	tc-export AR
-
-	econf "${myconf[@]}"
-}
-
-src_compile() {
-	emake
-
-	if use plugins ; then
-		emake -C examples/loadables all others
-	fi
-}
-
-src_install() {
-	local d f
-
-	default
-
-	dodir /bin
-	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
-	dosym bash /bin/rbash
-
-	insinto /etc/bash
-	doins "${FILESDIR}"/bash_logout
-	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
-
-	keepdir /etc/bash/bashrc.d
-
-	insinto /etc/skel
-	for f in bash{_logout,_profile,rc} ; do
-		newins "${FILESDIR}"/dot-${f} .${f}
-	done
-
-	local sed_args=(
-		-e "s:#${USERLAND}#@::"
-		-e '/#@/d'
-	)
-
-	if ! use readline ; then
-		# bug #432338
-		sed_args+=(
-			-e '/^shopt -s histappend/s:^:#:'
-			-e 's:use_color=true:use_color=false:'
-		)
-	fi
-
-	sed -i \
-		"${sed_args[@]}" \
-		"${ED}"/etc/skel/.bashrc \
-		"${ED}"/etc/bash/bashrc || die
-
-	if use plugins ; then
-		exeinto /usr/$(get_libdir)/bash
-		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
-
-		insinto /usr/include/bash-plugins
-		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
-	fi
-
-	if use examples ; then
-		for d in examples/{functions,misc,scripts,startup-files} ; do
-			exeinto /usr/share/doc/${PF}/${d}
-			docinto ${d}
-			for f in ${d}/* ; do
-				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
-					doexe ${f}
-				else
-					dodoc ${f}
-				fi
-			done
-		done
-	fi
-
-	# Install bash_builtins.1 and rbash.1
-	emake -C doc DESTDIR="${D}" install_builtins
-	sed 's:bash\.1:man1/&:' doc/rbash.1 > "${T}"/rbash.1 || die
-	doman "${T}"/rbash.1
-
-	newdoc CWRU/changelog ChangeLog
-	dosym bash.info /usr/share/info/bashref.info
-}
-
-pkg_preinst() {
-	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
-		mkdir -p "${EROOT}"/etc/bash
-		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
-	fi
-}
-
-pkg_postinst() {
-	# If /bin/sh does not exist, provide it
-	if [[ ! -e ${EROOT}/bin/sh ]] ; then
-		ln -sf bash "${EROOT}"/bin/sh
-	fi
-}
diff --git a/app-shells/bash/bash-5.1_p16-r3.ebuild b/app-shells/bash/bash-5.1_p16-r3.ebuild
deleted file mode 100644
index 9ff113498a62..000000000000
--- a/app-shells/bash/bash-5.1_p16-r3.ebuild
+++ /dev/null
@@ -1,315 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/chetramey.asc
-inherit flag-o-matic toolchain-funcs prefix verify-sig
-
-# Uncomment if we have a patchset
-GENTOO_PATCH_DEV="sam"
-GENTOO_PATCH_VER="${PV}"
-
-# Official patchlevel
-# See ftp://ftp.cwru.edu/pub/bash/bash-5.1-patches/
-PLEVEL="${PV##*_p}"
-MY_PV="${PV/_p*}"
-MY_PV="${MY_PV/_/-}"
-MY_P="${PN}-${MY_PV}"
-MY_PATCHES=()
-
-is_release() {
-	case ${PV} in
-		*_alpha*|*_beta*|*_rc*)
-			return 1
-			;;
-		*)
-			return 0
-			;;
-	esac
-}
-
-[[ ${PV} != *_p* ]] && PLEVEL=0
-
-# The version of readline this bash normally ships with.
-READLINE_VER="8.1"
-
-DESCRIPTION="The standard GNU Bourne again shell"
-HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html"
-
-if is_release ; then
-	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz"
-	SRC_URI+=" verify-sig? ( mirror://gnu/bash/${MY_P}.tar.gz.sig )"
-
-	if [[ ${PLEVEL} -gt 0 ]] ; then
-		# bash-5.1 -> bash51
-		my_p=${PN}$(ver_rs 1-2 '' $(ver_cut 1-2))
-
-	        patch_url=
-		my_patch_index=
-
-		for ((my_patch_index=1; my_patch_index <= ${PLEVEL} ; my_patch_index++)) ; do
-			for url in mirror://gnu/${pn} ftp://ftp.cwru.edu/pub/bash ; do
-				patch_url=$(printf "${url}/${PN}-$(ver_cut 1-2)-patches/${my_p}-%03d" ${my_patch_index})
-				SRC_URI+=" ${patch_url}"
-				SRC_URI+=" verify-sig? ( ${patch_url}.sig )"
-
-			done
-
-			MY_PATCHES+=( "${DISTDIR}"/$(printf ${my_p}-%03d ${my_patch_index}) )
-		done
-
-		unset my_pn patch_url my_patch_index
-	fi
-else
-	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
-	SRC_URI+=" verify-sig? ( ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz.sig )"
-fi
-
-if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
-fi
-
-LICENSE="GPL-3"
-SLOT="0"
-[[ "${PV}" == *_rc* ]] || \
-KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
-
-DEPEND="
-	>=sys-libs/ncurses-5.2-r2:0=
-	nls? ( virtual/libintl )
-	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
-"
-RDEPEND="
-	${DEPEND}
-"
-# We only need yacc when the .y files get patched (bash42-005, bash51-011)
-BDEPEND="app-alternatives/yacc
-	verify-sig? ( sec-keys/openpgp-keys-chetramey )"
-
-S="${WORKDIR}/${MY_P}"
-
-PATCHES=(
-	# Patches from Chet sent to bashbug ml
-	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-syslog-history-extern.patch
-
-	"${FILESDIR}"/${PN}-5.1_p16-configure-clang16.patch
-)
-
-pkg_setup() {
-	# bug #7332
-	if is-flag -malign-double ; then
-		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
-		eerror "as it breaks LFS (struct stat64) on x86."
-		die "remove -malign-double from your CFLAGS mr ricer"
-	fi
-
-	if use bashlogger ; then
-		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
-		ewarn "This will log ALL output you enter into the shell, you have been warned."
-	fi
-}
-
-src_unpack() {
-	if [[ ${PV} == 9999 ]] ; then
-		git-r3_src_unpack
-	else
-		if use verify-sig ; then
-			verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.gz{,.sig}
-
-			local patch
-			for patch in "${MY_PATCHES[@]}" ; do
-				verify-sig_verify_detached ${patch}{,.sig}
-			done
-		fi
-
-		unpack ${MY_P}.tar.gz
-
-		if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-			unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
-		fi
-	fi
-}
-
-src_prepare() {
-	# Include official patches
-	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 "${MY_PATCHES[@]}"
-
-	# Clean out local libs so we know we use system ones w/releases.
-	if is_release ; then
-		rm -rf lib/{readline,termcap}/* || die
-		touch lib/{readline,termcap}/Makefile.in || die # for config.status
-		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
-	fi
-
-	# Prefixify hardcoded path names. No-op for non-prefix.
-	hprefixify pathnames.h.in
-
-	# Avoid regenerating docs after patches, bug #407985
-	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
-	touch -r . doc/* || die
-
-	eapply -p0 "${PATCHES[@]}"
-	eapply_user
-}
-
-src_configure() {
-	local myconf=(
-		--disable-profiling
-
-		# Force linking with system curses ... the bundled termcap lib
-		# sucks bad compared to ncurses.  For the most part, ncurses
-		# is here because readline needs it.  But bash itself calls
-		# ncurses in one or two small places :(.
-		--with-curses
-
-		$(use_enable mem-scramble)
-		$(use_enable net net-redirections)
-		$(use_enable readline)
-		$(use_enable readline bang-history)
-		$(use_enable readline history)
-		$(use_with afs)
-		$(use_with mem-scramble bash-malloc)
-	)
-
-	# For descriptions of these, see config-top.h
-	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
-	append-cppflags \
-		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
-		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
-		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
-		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
-		-DNON_INTERACTIVE_LOGIN_SHELLS \
-		-DSSH_SOURCE_BASHRC \
-		$(use bashlogger && echo -DSYSLOG_HISTORY)
-
-	# Don't even think about building this statically without
-	# reading bug #7714 first.  If you still build it statically,
-	# don't come crying to us with bugs ;).
-	#use static && export LDFLAGS="${LDFLAGS} -static"
-	use nls || myconf+=( --disable-nls )
-
-	# Historically, we always used the builtin readline, but since
-	# our handling of SONAME upgrades has gotten much more stable
-	# in the PM (and the readline ebuild itself preserves the old
-	# libs during upgrades), linking against the system copy should
-	# be safe.
-	# Exact cached version here doesn't really matter as long as it
-	# is at least what's in the DEPEND up above.
-	export ac_cv_rl_version=${READLINE_VER%%_*}
-
-	if is_release ; then
-		# Use system readline only with released versions.
-		myconf+=( --with-installed-readline=. )
-	fi
-
-	if use plugins ; then
-		append-ldflags -Wl,-rpath,"${EPREFIX}"/usr/$(get_libdir)/bash
-	else
-		# Disable the plugins logic by hand since bash doesn't
-		# provide a way of doing it.
-		export ac_cv_func_dl{close,open,sym}=no \
-			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
-
-		sed -i \
-			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
-			configure || die
-	fi
-
-	# bug #444070
-	tc-export AR
-
-	econf "${myconf[@]}"
-}
-
-src_compile() {
-	emake
-
-	if use plugins ; then
-		emake -C examples/loadables all others
-	fi
-}
-
-src_install() {
-	local d f
-
-	default
-
-	dodir /bin
-	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
-	dosym bash /bin/rbash
-
-	insinto /etc/bash
-	doins "${FILESDIR}"/bash_logout
-	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
-
-	keepdir /etc/bash/bashrc.d
-
-	insinto /etc/skel
-	for f in bash{_logout,_profile,rc} ; do
-		newins "${FILESDIR}"/dot-${f} .${f}
-	done
-
-	local sed_args=(
-		-e "s:#${USERLAND}#@::"
-		-e '/#@/d'
-	)
-
-	if ! use readline ; then
-		# bug #432338
-		sed_args+=(
-			-e '/^shopt -s histappend/s:^:#:'
-			-e 's:use_color=true:use_color=false:'
-		)
-	fi
-
-	sed -i \
-		"${sed_args[@]}" \
-		"${ED}"/etc/skel/.bashrc \
-		"${ED}"/etc/bash/bashrc || die
-
-	if use plugins ; then
-		exeinto /usr/$(get_libdir)/bash
-		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
-
-		insinto /usr/include/bash-plugins
-		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
-	fi
-
-	if use examples ; then
-		for d in examples/{functions,misc,scripts,startup-files} ; do
-			exeinto /usr/share/doc/${PF}/${d}
-			docinto ${d}
-			for f in ${d}/* ; do
-				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
-					doexe ${f}
-				else
-					dodoc ${f}
-				fi
-			done
-		done
-	fi
-
-	# Install bash_builtins.1 and rbash.1
-	emake -C doc DESTDIR="${D}" install_builtins
-	sed 's:bash\.1:man1/&:' doc/rbash.1 > "${T}"/rbash.1 || die
-	doman "${T}"/rbash.1
-
-	newdoc CWRU/changelog ChangeLog
-	dosym bash.info /usr/share/info/bashref.info
-}
-
-pkg_preinst() {
-	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
-		mkdir -p "${EROOT}"/etc/bash
-		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
-	fi
-}
-
-pkg_postinst() {
-	# If /bin/sh does not exist, provide it
-	if [[ ! -e ${EROOT}/bin/sh ]] ; then
-		ln -sf bash "${EROOT}"/bin/sh
-	fi
-}
diff --git a/app-shells/bash/bash-5.1_p16-r4.ebuild b/app-shells/bash/bash-5.1_p16-r4.ebuild
new file mode 100644
index 000000000000..0b77f1aab780
--- /dev/null
+++ b/app-shells/bash/bash-5.1_p16-r4.ebuild
@@ -0,0 +1,313 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/chetramey.asc
+inherit flag-o-matic toolchain-funcs prefix verify-sig
+
+# Uncomment if we have a patchset
+GENTOO_PATCH_DEV="sam"
+GENTOO_PATCH_VER="${PV}"
+
+# Official patchlevel
+# See ftp://ftp.cwru.edu/pub/bash/bash-5.1-patches/
+PLEVEL="${PV##*_p}"
+MY_PV="${PV/_p*}"
+MY_PV="${MY_PV/_/-}"
+MY_P="${PN}-${MY_PV}"
+MY_PATCHES=()
+
+is_release() {
+	case ${PV} in
+		*_alpha*|*_beta*|*_rc*)
+			return 1
+			;;
+		*)
+			return 0
+			;;
+	esac
+}
+
+[[ ${PV} != *_p* ]] && PLEVEL=0
+
+# The version of readline this bash normally ships with.
+READLINE_VER="8.1"
+
+DESCRIPTION="The standard GNU Bourne again shell"
+HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html"
+
+if is_release ; then
+	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz"
+	SRC_URI+=" verify-sig? ( mirror://gnu/bash/${MY_P}.tar.gz.sig )"
+
+	if [[ ${PLEVEL} -gt 0 ]] ; then
+		# bash-5.1 -> bash51
+		my_p=${PN}$(ver_rs 1-2 '' $(ver_cut 1-2))
+
+	        patch_url=
+		my_patch_index=
+
+		for ((my_patch_index=1; my_patch_index <= ${PLEVEL} ; my_patch_index++)) ; do
+			for url in mirror://gnu/${pn} ftp://ftp.cwru.edu/pub/bash ; do
+				patch_url=$(printf "${url}/${PN}-$(ver_cut 1-2)-patches/${my_p}-%03d" ${my_patch_index})
+				SRC_URI+=" ${patch_url}"
+				SRC_URI+=" verify-sig? ( ${patch_url}.sig )"
+
+			done
+
+			MY_PATCHES+=( "${DISTDIR}"/$(printf ${my_p}-%03d ${my_patch_index}) )
+		done
+
+		unset my_pn patch_url my_patch_index
+	fi
+else
+	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
+	SRC_URI+=" verify-sig? ( ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz.sig )"
+fi
+
+if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
+fi
+
+LICENSE="GPL-3"
+SLOT="0"
+[[ "${PV}" == *_rc* ]] || \
+KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~loong ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
+
+DEPEND="
+	>=sys-libs/ncurses-5.2-r2:0=
+	nls? ( virtual/libintl )
+	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
+"
+RDEPEND="
+	${DEPEND}
+"
+# We only need yacc when the .y files get patched (bash42-005, bash51-011)
+BDEPEND="app-alternatives/yacc
+	verify-sig? ( sec-keys/openpgp-keys-chetramey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+	# Patches from Chet sent to bashbug ml
+	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-syslog-history-extern.patch
+)
+
+pkg_setup() {
+	# bug #7332
+	if is-flag -malign-double ; then
+		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
+		eerror "as it breaks LFS (struct stat64) on x86."
+		die "remove -malign-double from your CFLAGS mr ricer"
+	fi
+
+	if use bashlogger ; then
+		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
+		ewarn "This will log ALL output you enter into the shell, you have been warned."
+	fi
+}
+
+src_unpack() {
+	if [[ ${PV} == 9999 ]] ; then
+		git-r3_src_unpack
+	else
+		if use verify-sig ; then
+			verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.gz{,.sig}
+
+			local patch
+			for patch in "${MY_PATCHES[@]}" ; do
+				verify-sig_verify_detached ${patch}{,.sig}
+			done
+		fi
+
+		unpack ${MY_P}.tar.gz
+
+		if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+			unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
+		fi
+	fi
+}
+
+src_prepare() {
+	# Include official patches
+	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 "${MY_PATCHES[@]}"
+
+	# Clean out local libs so we know we use system ones w/releases.
+	if is_release ; then
+		rm -rf lib/{readline,termcap}/* || die
+		touch lib/{readline,termcap}/Makefile.in || die # for config.status
+		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
+	fi
+
+	# Prefixify hardcoded path names. No-op for non-prefix.
+	hprefixify pathnames.h.in
+
+	# Avoid regenerating docs after patches, bug #407985
+	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
+	touch -r . doc/* || die
+
+	eapply -p0 "${PATCHES[@]}"
+	eapply_user
+}
+
+src_configure() {
+	local myconf=(
+		--disable-profiling
+
+		# Force linking with system curses ... the bundled termcap lib
+		# sucks bad compared to ncurses.  For the most part, ncurses
+		# is here because readline needs it.  But bash itself calls
+		# ncurses in one or two small places :(.
+		--with-curses
+
+		$(use_enable mem-scramble)
+		$(use_enable net net-redirections)
+		$(use_enable readline)
+		$(use_enable readline bang-history)
+		$(use_enable readline history)
+		$(use_with afs)
+		$(use_with mem-scramble bash-malloc)
+	)
+
+	# For descriptions of these, see config-top.h
+	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
+	append-cppflags \
+		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
+		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
+		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
+		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
+		-DNON_INTERACTIVE_LOGIN_SHELLS \
+		-DSSH_SOURCE_BASHRC \
+		$(use bashlogger && echo -DSYSLOG_HISTORY)
+
+	# Don't even think about building this statically without
+	# reading bug #7714 first.  If you still build it statically,
+	# don't come crying to us with bugs ;).
+	#use static && export LDFLAGS="${LDFLAGS} -static"
+	use nls || myconf+=( --disable-nls )
+
+	# Historically, we always used the builtin readline, but since
+	# our handling of SONAME upgrades has gotten much more stable
+	# in the PM (and the readline ebuild itself preserves the old
+	# libs during upgrades), linking against the system copy should
+	# be safe.
+	# Exact cached version here doesn't really matter as long as it
+	# is at least what's in the DEPEND up above.
+	export ac_cv_rl_version=${READLINE_VER%%_*}
+
+	if is_release ; then
+		# Use system readline only with released versions.
+		myconf+=( --with-installed-readline=. )
+	fi
+
+	if use plugins ; then
+		append-ldflags -Wl,-rpath,"${EPREFIX}"/usr/$(get_libdir)/bash
+	else
+		# Disable the plugins logic by hand since bash doesn't
+		# provide a way of doing it.
+		export ac_cv_func_dl{close,open,sym}=no \
+			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
+
+		sed -i \
+			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
+			configure || die
+	fi
+
+	# bug #444070
+	tc-export AR
+
+	econf "${myconf[@]}"
+}
+
+src_compile() {
+	emake
+
+	if use plugins ; then
+		emake -C examples/loadables all others
+	fi
+}
+
+src_install() {
+	local d f
+
+	default
+
+	dodir /bin
+	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
+	dosym bash /bin/rbash
+
+	insinto /etc/bash
+	doins "${FILESDIR}"/bash_logout
+	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
+
+	keepdir /etc/bash/bashrc.d
+
+	insinto /etc/skel
+	for f in bash{_logout,_profile,rc} ; do
+		newins "${FILESDIR}"/dot-${f} .${f}
+	done
+
+	local sed_args=(
+		-e 's:#GNU#@::'
+		-e '/#@/d'
+	)
+
+	if ! use readline ; then
+		# bug #432338
+		sed_args+=(
+			-e '/^shopt -s histappend/s:^:#:'
+			-e 's:use_color=true:use_color=false:'
+		)
+	fi
+
+	sed -i \
+		"${sed_args[@]}" \
+		"${ED}"/etc/skel/.bashrc \
+		"${ED}"/etc/bash/bashrc || die
+
+	if use plugins ; then
+		exeinto /usr/$(get_libdir)/bash
+		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
+
+		insinto /usr/include/bash-plugins
+		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
+	fi
+
+	if use examples ; then
+		for d in examples/{functions,misc,scripts,startup-files} ; do
+			exeinto /usr/share/doc/${PF}/${d}
+			docinto ${d}
+			for f in ${d}/* ; do
+				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
+					doexe ${f}
+				else
+					dodoc ${f}
+				fi
+			done
+		done
+	fi
+
+	# Install bash_builtins.1 and rbash.1
+	emake -C doc DESTDIR="${D}" install_builtins
+	sed 's:bash\.1:man1/&:' doc/rbash.1 > "${T}"/rbash.1 || die
+	doman "${T}"/rbash.1
+
+	newdoc CWRU/changelog ChangeLog
+	dosym bash.info /usr/share/info/bashref.info
+}
+
+pkg_preinst() {
+	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
+		mkdir -p "${EROOT}"/etc/bash
+		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
+	fi
+}
+
+pkg_postinst() {
+	# If /bin/sh does not exist, provide it
+	if [[ ! -e ${EROOT}/bin/sh ]] ; then
+		ln -sf bash "${EROOT}"/bin/sh
+	fi
+}
diff --git a/app-shells/bash/bash-5.1_p16-r5.ebuild b/app-shells/bash/bash-5.1_p16-r5.ebuild
new file mode 100644
index 000000000000..706d0106eb91
--- /dev/null
+++ b/app-shells/bash/bash-5.1_p16-r5.ebuild
@@ -0,0 +1,315 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/chetramey.asc
+inherit flag-o-matic toolchain-funcs prefix verify-sig
+
+# Uncomment if we have a patchset
+GENTOO_PATCH_DEV="sam"
+GENTOO_PATCH_VER="${PV}"
+
+# Official patchlevel
+# See ftp://ftp.cwru.edu/pub/bash/bash-5.1-patches/
+PLEVEL="${PV##*_p}"
+MY_PV="${PV/_p*}"
+MY_PV="${MY_PV/_/-}"
+MY_P="${PN}-${MY_PV}"
+MY_PATCHES=()
+
+is_release() {
+	case ${PV} in
+		*_alpha*|*_beta*|*_rc*)
+			return 1
+			;;
+		*)
+			return 0
+			;;
+	esac
+}
+
+[[ ${PV} != *_p* ]] && PLEVEL=0
+
+# The version of readline this bash normally ships with.
+READLINE_VER="8.1"
+
+DESCRIPTION="The standard GNU Bourne again shell"
+HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html"
+
+if is_release ; then
+	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz"
+	SRC_URI+=" verify-sig? ( mirror://gnu/bash/${MY_P}.tar.gz.sig )"
+
+	if [[ ${PLEVEL} -gt 0 ]] ; then
+		# bash-5.1 -> bash51
+		my_p=${PN}$(ver_rs 1-2 '' $(ver_cut 1-2))
+
+	        patch_url=
+		my_patch_index=
+
+		for ((my_patch_index=1; my_patch_index <= ${PLEVEL} ; my_patch_index++)) ; do
+			for url in mirror://gnu/${pn} ftp://ftp.cwru.edu/pub/bash ; do
+				patch_url=$(printf "${url}/${PN}-$(ver_cut 1-2)-patches/${my_p}-%03d" ${my_patch_index})
+				SRC_URI+=" ${patch_url}"
+				SRC_URI+=" verify-sig? ( ${patch_url}.sig )"
+
+			done
+
+			MY_PATCHES+=( "${DISTDIR}"/$(printf ${my_p}-%03d ${my_patch_index}) )
+		done
+
+		unset my_pn patch_url my_patch_index
+	fi
+else
+	SRC_URI="ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
+	SRC_URI+=" verify-sig? ( ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz.sig )"
+fi
+
+if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
+fi
+
+LICENSE="GPL-3"
+SLOT="0"
+[[ "${PV}" == *_rc* ]] || \
+KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+IUSE="afs bashlogger examples mem-scramble +net nls plugins +readline"
+
+DEPEND="
+	>=sys-libs/ncurses-5.2-r2:0=
+	nls? ( virtual/libintl )
+	readline? ( >=sys-libs/readline-${READLINE_VER}:0= )
+"
+RDEPEND="
+	${DEPEND}
+"
+# We only need yacc when the .y files get patched (bash42-005, bash51-011)
+BDEPEND="app-alternatives/yacc
+	verify-sig? ( sec-keys/openpgp-keys-chetramey )"
+
+S="${WORKDIR}/${MY_P}"
+
+PATCHES=(
+	# Patches from Chet sent to bashbug ml
+	"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}-patches/${PN}-5.0-syslog-history-extern.patch
+
+	"${FILESDIR}"/${PN}-5.1_p16-configure-clang16.patch
+)
+
+pkg_setup() {
+	# bug #7332
+	if is-flag -malign-double ; then
+		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
+		eerror "as it breaks LFS (struct stat64) on x86."
+		die "remove -malign-double from your CFLAGS mr ricer"
+	fi
+
+	if use bashlogger ; then
+		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
+		ewarn "This will log ALL output you enter into the shell, you have been warned."
+	fi
+}
+
+src_unpack() {
+	if [[ ${PV} == 9999 ]] ; then
+		git-r3_src_unpack
+	else
+		if use verify-sig ; then
+			verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.gz{,.sig}
+
+			local patch
+			for patch in "${MY_PATCHES[@]}" ; do
+				verify-sig_verify_detached ${patch}{,.sig}
+			done
+		fi
+
+		unpack ${MY_P}.tar.gz
+
+		if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+			unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
+		fi
+	fi
+}
+
+src_prepare() {
+	# Include official patches
+	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 "${MY_PATCHES[@]}"
+
+	# Clean out local libs so we know we use system ones w/releases.
+	if is_release ; then
+		rm -rf lib/{readline,termcap}/* || die
+		touch lib/{readline,termcap}/Makefile.in || die # for config.status
+		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
+	fi
+
+	# Prefixify hardcoded path names. No-op for non-prefix.
+	hprefixify pathnames.h.in
+
+	# Avoid regenerating docs after patches, bug #407985
+	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
+	touch -r . doc/* || die
+
+	eapply -p0 "${PATCHES[@]}"
+	eapply_user
+}
+
+src_configure() {
+	local myconf=(
+		--disable-profiling
+
+		# Force linking with system curses ... the bundled termcap lib
+		# sucks bad compared to ncurses.  For the most part, ncurses
+		# is here because readline needs it.  But bash itself calls
+		# ncurses in one or two small places :(.
+		--with-curses
+
+		$(use_enable mem-scramble)
+		$(use_enable net net-redirections)
+		$(use_enable readline)
+		$(use_enable readline bang-history)
+		$(use_enable readline history)
+		$(use_with afs)
+		$(use_with mem-scramble bash-malloc)
+	)
+
+	# For descriptions of these, see config-top.h
+	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
+	append-cppflags \
+		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
+		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
+		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
+		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
+		-DNON_INTERACTIVE_LOGIN_SHELLS \
+		-DSSH_SOURCE_BASHRC \
+		$(use bashlogger && echo -DSYSLOG_HISTORY)
+
+	# Don't even think about building this statically without
+	# reading bug #7714 first.  If you still build it statically,
+	# don't come crying to us with bugs ;).
+	#use static && export LDFLAGS="${LDFLAGS} -static"
+	use nls || myconf+=( --disable-nls )
+
+	# Historically, we always used the builtin readline, but since
+	# our handling of SONAME upgrades has gotten much more stable
+	# in the PM (and the readline ebuild itself preserves the old
+	# libs during upgrades), linking against the system copy should
+	# be safe.
+	# Exact cached version here doesn't really matter as long as it
+	# is at least what's in the DEPEND up above.
+	export ac_cv_rl_version=${READLINE_VER%%_*}
+
+	if is_release ; then
+		# Use system readline only with released versions.
+		myconf+=( --with-installed-readline=. )
+	fi
+
+	if use plugins ; then
+		append-ldflags -Wl,-rpath,"${EPREFIX}"/usr/$(get_libdir)/bash
+	else
+		# Disable the plugins logic by hand since bash doesn't
+		# provide a way of doing it.
+		export ac_cv_func_dl{close,open,sym}=no \
+			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
+
+		sed -i \
+			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
+			configure || die
+	fi
+
+	# bug #444070
+	tc-export AR
+
+	econf "${myconf[@]}"
+}
+
+src_compile() {
+	emake
+
+	if use plugins ; then
+		emake -C examples/loadables all others
+	fi
+}
+
+src_install() {
+	local d f
+
+	default
+
+	dodir /bin
+	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
+	dosym bash /bin/rbash
+
+	insinto /etc/bash
+	doins "${FILESDIR}"/bash_logout
+	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
+
+	keepdir /etc/bash/bashrc.d
+
+	insinto /etc/skel
+	for f in bash{_logout,_profile,rc} ; do
+		newins "${FILESDIR}"/dot-${f} .${f}
+	done
+
+	local sed_args=(
+		-e 's:#GNU#@::'
+		-e '/#@/d'
+	)
+
+	if ! use readline ; then
+		# bug #432338
+		sed_args+=(
+			-e '/^shopt -s histappend/s:^:#:'
+			-e 's:use_color=true:use_color=false:'
+		)
+	fi
+
+	sed -i \
+		"${sed_args[@]}" \
+		"${ED}"/etc/skel/.bashrc \
+		"${ED}"/etc/bash/bashrc || die
+
+	if use plugins ; then
+		exeinto /usr/$(get_libdir)/bash
+		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
+
+		insinto /usr/include/bash-plugins
+		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
+	fi
+
+	if use examples ; then
+		for d in examples/{functions,misc,scripts,startup-files} ; do
+			exeinto /usr/share/doc/${PF}/${d}
+			docinto ${d}
+			for f in ${d}/* ; do
+				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
+					doexe ${f}
+				else
+					dodoc ${f}
+				fi
+			done
+		done
+	fi
+
+	# Install bash_builtins.1 and rbash.1
+	emake -C doc DESTDIR="${D}" install_builtins
+	sed 's:bash\.1:man1/&:' doc/rbash.1 > "${T}"/rbash.1 || die
+	doman "${T}"/rbash.1
+
+	newdoc CWRU/changelog ChangeLog
+	dosym bash.info /usr/share/info/bashref.info
+}
+
+pkg_preinst() {
+	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
+		mkdir -p "${EROOT}"/etc/bash
+		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
+	fi
+}
+
+pkg_postinst() {
+	# If /bin/sh does not exist, provide it
+	if [[ ! -e ${EROOT}/bin/sh ]] ; then
+		ln -sf bash "${EROOT}"/bin/sh
+	fi
+}
diff --git a/app-shells/bash/bash-5.2_p15-r2.ebuild b/app-shells/bash/bash-5.2_p15-r2.ebuild
deleted file mode 100644
index 6d741db8454c..000000000000
--- a/app-shells/bash/bash-5.2_p15-r2.ebuild
+++ /dev/null
@@ -1,355 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/chetramey.asc
-inherit flag-o-matic toolchain-funcs prefix verify-sig
-
-# Uncomment if we have a patchset
-#GENTOO_PATCH_DEV="sam"
-#GENTOO_PATCH_VER="${PV}"
-
-# Official patchlevel
-# See ftp://ftp.cwru.edu/pub/bash/bash-5.1-patches/
-PLEVEL="${PV##*_p}"
-MY_PV="${PV/_p*}"
-MY_PV="${MY_PV/_/-}"
-MY_P="${PN}-${MY_PV}"
-MY_PATCHES=()
-
-is_release() {
-	case ${PV} in
-		9999|*_alpha*|*_beta*|*_rc*)
-			return 1
-			;;
-		*)
-			return 0
-			;;
-	esac
-}
-
-[[ ${PV} != *_p* ]] && PLEVEL=0
-
-# The version of readline this bash normally ships with.
-# Note: right now, we don't use the system copy of readline for bash for non-releases.
-READLINE_VER="8.2_p1"
-
-DESCRIPTION="The standard GNU Bourne again shell"
-HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html https://git.savannah.gnu.org/cgit/bash.git"
-
-if [[ ${PV} == 9999 ]] ; then
-	EGIT_REPO_URI="https://git.savannah.gnu.org/git/bash.git"
-	EGIT_BRANCH=devel
-	inherit git-r3
-elif is_release ; then
-	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz"
-	SRC_URI+=" verify-sig? ( mirror://gnu/bash/${MY_P}.tar.gz.sig )"
-
-	if [[ ${PLEVEL} -gt 0 ]] ; then
-		# bash-5.1 -> bash51
-		my_p=${PN}$(ver_rs 1-2 '' $(ver_cut 1-2))
-
-		patch_url=
-		my_patch_index=
-
-		for ((my_patch_index=1; my_patch_index <= ${PLEVEL} ; my_patch_index++)) ; do
-			for url in mirror://gnu/${pn} ftp://ftp.cwru.edu/pub/bash ; do
-				patch_url=$(printf "${url}/${PN}-$(ver_cut 1-2)-patches/${my_p}-%03d" ${my_patch_index})
-				SRC_URI+=" ${patch_url}"
-				SRC_URI+=" verify-sig? ( ${patch_url}.sig )"
-			done
-
-			MY_PATCHES+=( "${DISTDIR}"/$(printf ${my_p}-%03d ${my_patch_index}) )
-		done
-
-		unset my_pn patch_url my_patch_index
-	fi
-else
-	SRC_URI="mirror://gnu/${PN}/${MY_P}.tar.gz ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
-	SRC_URI+=" verify-sig? ( mirror://gnu/${PN}/${MY_P}.tar.gz.sig ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz.sig )"
-fi
-
-if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
-fi
-
-LICENSE="GPL-3+"
-SLOT="0"
-if is_release ; then
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
-fi
-IUSE="afs bashlogger examples mem-scramble +net nls plugins pgo +readline"
-
-DEPEND="
-	>=sys-libs/ncurses-5.2-r2:=
-	nls? ( virtual/libintl )
-"
-if is_release ; then
-	DEPEND+=" readline? ( >=sys-libs/readline-${READLINE_VER}:= )"
-fi
-RDEPEND="
-	${DEPEND}
-"
-# We only need yacc when the .y files get patched (bash42-005, bash51-011)
-BDEPEND="
-	app-alternatives/yacc
-	pgo? ( dev-util/gperf )
-	verify-sig? ( sec-keys/openpgp-keys-chetramey )
-"
-
-S="${WORKDIR}/${MY_P}"
-
-# EAPI 8 tries to append it but it doesn't exist here
-QA_CONFIGURE_OPTIONS="--disable-static"
-
-PATCHES=(
-	#"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}/
-
-	# Patches from Chet sent to bash-bug ml
-	"${FILESDIR}"/${PN}-5.0-syslog-history-extern.patch
-	"${FILESDIR}"/${PN}-5.2_p15-random-ub.patch
-	"${FILESDIR}"/${PN}-5.2_p15-configure-clang16.patch
-)
-
-pkg_setup() {
-	# bug #7332
-	if is-flag -malign-double ; then
-		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
-		eerror "as it breaks LFS (struct stat64) on x86."
-		die "remove -malign-double from your CFLAGS mr ricer"
-	fi
-
-	if use bashlogger ; then
-		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
-		ewarn "This will log ALL output you enter into the shell, you have been warned."
-	fi
-}
-
-src_unpack() {
-	if [[ ${PV} == 9999 ]] ; then
-		git-r3_src_unpack
-	else
-		if use verify-sig ; then
-			verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.gz{,.sig}
-
-			local patch
-			for patch in "${MY_PATCHES[@]}" ; do
-				verify-sig_verify_detached ${patch}{,.sig}
-			done
-		fi
-
-		unpack ${MY_P}.tar.gz
-
-		if [[ -n ${GENTOO_PATCH_VER} ]] ; then
-			unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
-		fi
-	fi
-}
-
-src_prepare() {
-	# Include official patches
-	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 "${MY_PATCHES[@]}"
-
-	# Clean out local libs so we know we use system ones w/releases.
-	if is_release ; then
-		rm -rf lib/{readline,termcap}/* || die
-		touch lib/{readline,termcap}/Makefile.in || die # for config.status
-		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
-	fi
-
-	# Prefixify hardcoded path names. No-op for non-prefix.
-	hprefixify pathnames.h.in
-
-	# Avoid regenerating docs after patches, bug #407985
-	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
-	touch -r . doc/* || die
-
-	eapply -p0 "${PATCHES[@]}"
-	eapply_user
-}
-
-src_configure() {
-	local myconf=(
-		--disable-profiling
-
-		# Force linking with system curses ... the bundled termcap lib
-		# sucks bad compared to ncurses.  For the most part, ncurses
-		# is here because readline needs it.  But bash itself calls
-		# ncurses in one or two small places :(.
-		--with-curses
-
-		$(use_enable mem-scramble)
-		$(use_enable net net-redirections)
-		$(use_enable readline)
-		$(use_enable readline bang-history)
-		$(use_enable readline history)
-		$(use_with afs)
-		$(use_with mem-scramble bash-malloc)
-	)
-
-	# For descriptions of these, see config-top.h
-	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
-	append-cppflags \
-		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
-		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
-		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
-		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
-		-DNON_INTERACTIVE_LOGIN_SHELLS \
-		-DSSH_SOURCE_BASHRC \
-		$(use bashlogger && echo -DSYSLOG_HISTORY)
-
-	# Don't even think about building this statically without
-	# reading bug #7714 first.  If you still build it statically,
-	# don't come crying to us with bugs ;).
-	#use static && export LDFLAGS="${LDFLAGS} -static"
-	use nls || myconf+=( --disable-nls )
-
-	if is_release ; then
-		# Historically, we always used the builtin readline, but since
-		# our handling of SONAME upgrades has gotten much more stable
-		# in the PM (and the readline ebuild itself preserves the old
-		# libs during upgrades), linking against the system copy should
-		# be safe.
-		# Exact cached version here doesn't really matter as long as it
-		# is at least what's in the DEPEND up above.
-		export ac_cv_rl_version=${READLINE_VER%%_*}
-
-		# Use system readline only with released versions.
-		myconf+=( --with-installed-readline=. )
-	fi
-
-	if use plugins ; then
-		append-ldflags -Wl,-rpath,"${EPREFIX}"/usr/$(get_libdir)/bash
-	else
-		# Disable the plugins logic by hand since bash doesn't
-		# provide a way of doing it.
-		export ac_cv_func_dl{close,open,sym}=no \
-			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
-
-		sed -i \
-			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
-			configure || die
-	fi
-
-	# bug #444070
-	tc-export AR
-
-	econf "${myconf[@]}"
-}
-
-src_compile() {
-	if use pgo ; then
-		# Build Bash and run its tests to generate profiles.
-		emake CFLAGS="${CFLAGS} -fprofile-generate=${T}/pgo -fprofile-dir=${T}/pgo"
-
-		# Used in test suite.
-		unset A
-
-		emake CFLAGS="${CFLAGS} -fprofile-generate=${T}/pgo -fprofile-dir=${T}/pgo" -k check
-
-		if tc-is-clang; then
-			llvm-profdata merge "${T}"/pgo --output="${T}"/pgo/default.profdata || die
-		fi
-
-		# Rebuild Bash using the profiling data we just generated.
-		emake clean
-		emake CFLAGS="${CFLAGS} -fprofile-use=${T}/pgo -fprofile-dir=${T}/pgo"
-
-		use plugins && emake -C examples/loadables CFLAGS="${CFLAGS} -fprofile-use=${T}/pgo -fprofile-dir=${T}/pgo" all others
-	else
-		emake
-
-		use plugins && emake -C examples/loadables all others
-	fi
-}
-
-src_test() {
-	# Used in test suite.
-	unset A
-
-	default
-}
-
-src_install() {
-	local d f
-
-	default
-
-	dodir /bin
-	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
-	dosym bash /bin/rbash
-
-	insinto /etc/bash
-	doins "${FILESDIR}"/bash_logout
-	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
-
-	keepdir /etc/bash/bashrc.d
-
-	insinto /etc/skel
-	for f in bash{_logout,_profile,rc} ; do
-		newins "${FILESDIR}"/dot-${f} .${f}
-	done
-
-	local sed_args=(
-		-e "s:#${USERLAND}#@::"
-		-e '/#@/d'
-	)
-
-	if ! use readline ; then
-		# bug #432338
-		sed_args+=(
-			-e '/^shopt -s histappend/s:^:#:'
-			-e 's:use_color=true:use_color=false:'
-		)
-	fi
-
-	sed -i \
-		"${sed_args[@]}" \
-		"${ED}"/etc/skel/.bashrc \
-		"${ED}"/etc/bash/bashrc || die
-
-	if use plugins ; then
-		exeinto /usr/$(get_libdir)/bash
-		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
-
-		insinto /usr/include/bash-plugins
-		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
-	fi
-
-	if use examples ; then
-		for d in examples/{functions,misc,scripts,startup-files} ; do
-			exeinto /usr/share/doc/${PF}/${d}
-			docinto ${d}
-			for f in ${d}/* ; do
-				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
-					doexe ${f}
-				else
-					dodoc ${f}
-				fi
-			done
-		done
-	fi
-
-	# Install bash_builtins.1 and rbash.1
-	emake -C doc DESTDIR="${D}" install_builtins
-	sed 's:bash\.1:man1/&:' doc/rbash.1 > "${T}"/rbash.1 || die
-	doman "${T}"/rbash.1
-
-	newdoc CWRU/changelog ChangeLog
-	dosym bash.info /usr/share/info/bashref.info
-}
-
-pkg_preinst() {
-	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
-		mkdir -p "${EROOT}"/etc/bash
-		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
-	fi
-}
-
-pkg_postinst() {
-	# If /bin/sh does not exist, provide it
-	if [[ ! -e ${EROOT}/bin/sh ]] ; then
-		ln -sf bash "${EROOT}"/bin/sh
-	fi
-}
diff --git a/app-shells/bash/bash-5.2_p15-r3.ebuild b/app-shells/bash/bash-5.2_p15-r3.ebuild
new file mode 100644
index 000000000000..1c78f3bab2c0
--- /dev/null
+++ b/app-shells/bash/bash-5.2_p15-r3.ebuild
@@ -0,0 +1,355 @@
+# Copyright 1999-2023 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/chetramey.asc
+inherit flag-o-matic toolchain-funcs prefix verify-sig
+
+# Uncomment if we have a patchset
+#GENTOO_PATCH_DEV="sam"
+#GENTOO_PATCH_VER="${PV}"
+
+# Official patchlevel
+# See ftp://ftp.cwru.edu/pub/bash/bash-5.1-patches/
+PLEVEL="${PV##*_p}"
+MY_PV="${PV/_p*}"
+MY_PV="${MY_PV/_/-}"
+MY_P="${PN}-${MY_PV}"
+MY_PATCHES=()
+
+is_release() {
+	case ${PV} in
+		9999|*_alpha*|*_beta*|*_rc*)
+			return 1
+			;;
+		*)
+			return 0
+			;;
+	esac
+}
+
+[[ ${PV} != *_p* ]] && PLEVEL=0
+
+# The version of readline this bash normally ships with.
+# Note: right now, we don't use the system copy of readline for bash for non-releases.
+READLINE_VER="8.2_p1"
+
+DESCRIPTION="The standard GNU Bourne again shell"
+HOMEPAGE="https://tiswww.case.edu/php/chet/bash/bashtop.html https://git.savannah.gnu.org/cgit/bash.git"
+
+if [[ ${PV} == 9999 ]] ; then
+	EGIT_REPO_URI="https://git.savannah.gnu.org/git/bash.git"
+	EGIT_BRANCH=devel
+	inherit git-r3
+elif is_release ; then
+	SRC_URI="mirror://gnu/bash/${MY_P}.tar.gz"
+	SRC_URI+=" verify-sig? ( mirror://gnu/bash/${MY_P}.tar.gz.sig )"
+
+	if [[ ${PLEVEL} -gt 0 ]] ; then
+		# bash-5.1 -> bash51
+		my_p=${PN}$(ver_rs 1-2 '' $(ver_cut 1-2))
+
+		patch_url=
+		my_patch_index=
+
+		for ((my_patch_index=1; my_patch_index <= ${PLEVEL} ; my_patch_index++)) ; do
+			for url in mirror://gnu/${pn} ftp://ftp.cwru.edu/pub/bash ; do
+				patch_url=$(printf "${url}/${PN}-$(ver_cut 1-2)-patches/${my_p}-%03d" ${my_patch_index})
+				SRC_URI+=" ${patch_url}"
+				SRC_URI+=" verify-sig? ( ${patch_url}.sig )"
+			done
+
+			MY_PATCHES+=( "${DISTDIR}"/$(printf ${my_p}-%03d ${my_patch_index}) )
+		done
+
+		unset my_pn patch_url my_patch_index
+	fi
+else
+	SRC_URI="mirror://gnu/${PN}/${MY_P}.tar.gz ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz"
+	SRC_URI+=" verify-sig? ( mirror://gnu/${PN}/${MY_P}.tar.gz.sig ftp://ftp.cwru.edu/pub/bash/${MY_P}.tar.gz.sig )"
+fi
+
+if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+	SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${PN}-${GENTOO_PATCH_VER}-patches.tar.xz"
+fi
+
+LICENSE="GPL-3+"
+SLOT="0"
+if is_release ; then
+	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~arm64-macos ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris"
+fi
+IUSE="afs bashlogger examples mem-scramble +net nls plugins pgo +readline"
+
+DEPEND="
+	>=sys-libs/ncurses-5.2-r2:=
+	nls? ( virtual/libintl )
+"
+if is_release ; then
+	DEPEND+=" readline? ( >=sys-libs/readline-${READLINE_VER}:= )"
+fi
+RDEPEND="
+	${DEPEND}
+"
+# We only need yacc when the .y files get patched (bash42-005, bash51-011)
+BDEPEND="
+	app-alternatives/yacc
+	pgo? ( dev-util/gperf )
+	verify-sig? ( sec-keys/openpgp-keys-chetramey )
+"
+
+S="${WORKDIR}/${MY_P}"
+
+# EAPI 8 tries to append it but it doesn't exist here
+QA_CONFIGURE_OPTIONS="--disable-static"
+
+PATCHES=(
+	#"${WORKDIR}"/${PN}-${GENTOO_PATCH_VER}/
+
+	# Patches from Chet sent to bash-bug ml
+	"${FILESDIR}"/${PN}-5.0-syslog-history-extern.patch
+	"${FILESDIR}"/${PN}-5.2_p15-random-ub.patch
+	"${FILESDIR}"/${PN}-5.2_p15-configure-clang16.patch
+)
+
+pkg_setup() {
+	# bug #7332
+	if is-flag -malign-double ; then
+		eerror "Detected bad CFLAGS '-malign-double'.  Do not use this"
+		eerror "as it breaks LFS (struct stat64) on x86."
+		die "remove -malign-double from your CFLAGS mr ricer"
+	fi
+
+	if use bashlogger ; then
+		ewarn "The logging patch should ONLY be used in restricted (i.e. honeypot) envs."
+		ewarn "This will log ALL output you enter into the shell, you have been warned."
+	fi
+}
+
+src_unpack() {
+	if [[ ${PV} == 9999 ]] ; then
+		git-r3_src_unpack
+	else
+		if use verify-sig ; then
+			verify-sig_verify_detached "${DISTDIR}"/${MY_P}.tar.gz{,.sig}
+
+			local patch
+			for patch in "${MY_PATCHES[@]}" ; do
+				verify-sig_verify_detached ${patch}{,.sig}
+			done
+		fi
+
+		unpack ${MY_P}.tar.gz
+
+		if [[ -n ${GENTOO_PATCH_VER} ]] ; then
+			unpack ${PN}-${GENTOO_PATCH_VER}-patches.tar.xz
+		fi
+	fi
+}
+
+src_prepare() {
+	# Include official patches
+	[[ ${PLEVEL} -gt 0 ]] && eapply -p0 "${MY_PATCHES[@]}"
+
+	# Clean out local libs so we know we use system ones w/releases.
+	if is_release ; then
+		rm -rf lib/{readline,termcap}/* || die
+		touch lib/{readline,termcap}/Makefile.in || die # for config.status
+		sed -ri -e 's:\$[{(](RL|HIST)_LIBSRC[)}]/[[:alpha:]_-]*\.h::g' Makefile.in || die
+	fi
+
+	# Prefixify hardcoded path names. No-op for non-prefix.
+	hprefixify pathnames.h.in
+
+	# Avoid regenerating docs after patches, bug #407985
+	sed -i -r '/^(HS|RL)USER/s:=.*:=:' doc/Makefile.in || die
+	touch -r . doc/* || die
+
+	eapply -p0 "${PATCHES[@]}"
+	eapply_user
+}
+
+src_configure() {
+	local myconf=(
+		--disable-profiling
+
+		# Force linking with system curses ... the bundled termcap lib
+		# sucks bad compared to ncurses.  For the most part, ncurses
+		# is here because readline needs it.  But bash itself calls
+		# ncurses in one or two small places :(.
+		--with-curses
+
+		$(use_enable mem-scramble)
+		$(use_enable net net-redirections)
+		$(use_enable readline)
+		$(use_enable readline bang-history)
+		$(use_enable readline history)
+		$(use_with afs)
+		$(use_with mem-scramble bash-malloc)
+	)
+
+	# For descriptions of these, see config-top.h
+	# bashrc/#26952 bash_logout/#90488 ssh/#24762 mktemp/#574426
+	append-cppflags \
+		-DDEFAULT_PATH_VALUE=\'\""${EPREFIX}"/usr/local/sbin:"${EPREFIX}"/usr/local/bin:"${EPREFIX}"/usr/sbin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/bin\"\' \
+		-DSTANDARD_UTILS_PATH=\'\""${EPREFIX}"/bin:"${EPREFIX}"/usr/bin:"${EPREFIX}"/sbin:"${EPREFIX}"/usr/sbin\"\' \
+		-DSYS_BASHRC=\'\""${EPREFIX}"/etc/bash/bashrc\"\' \
+		-DSYS_BASH_LOGOUT=\'\""${EPREFIX}"/etc/bash/bash_logout\"\' \
+		-DNON_INTERACTIVE_LOGIN_SHELLS \
+		-DSSH_SOURCE_BASHRC \
+		$(use bashlogger && echo -DSYSLOG_HISTORY)
+
+	# Don't even think about building this statically without
+	# reading bug #7714 first.  If you still build it statically,
+	# don't come crying to us with bugs ;).
+	#use static && export LDFLAGS="${LDFLAGS} -static"
+	use nls || myconf+=( --disable-nls )
+
+	if is_release ; then
+		# Historically, we always used the builtin readline, but since
+		# our handling of SONAME upgrades has gotten much more stable
+		# in the PM (and the readline ebuild itself preserves the old
+		# libs during upgrades), linking against the system copy should
+		# be safe.
+		# Exact cached version here doesn't really matter as long as it
+		# is at least what's in the DEPEND up above.
+		export ac_cv_rl_version=${READLINE_VER%%_*}
+
+		# Use system readline only with released versions.
+		myconf+=( --with-installed-readline=. )
+	fi
+
+	if use plugins ; then
+		append-ldflags -Wl,-rpath,"${EPREFIX}"/usr/$(get_libdir)/bash
+	else
+		# Disable the plugins logic by hand since bash doesn't
+		# provide a way of doing it.
+		export ac_cv_func_dl{close,open,sym}=no \
+			ac_cv_lib_dl_dlopen=no ac_cv_header_dlfcn_h=no
+
+		sed -i \
+			-e '/LOCAL_LDFLAGS=/s:-rdynamic::' \
+			configure || die
+	fi
+
+	# bug #444070
+	tc-export AR
+
+	econf "${myconf[@]}"
+}
+
+src_compile() {
+	if use pgo ; then
+		# Build Bash and run its tests to generate profiles.
+		emake CFLAGS="${CFLAGS} -fprofile-generate=${T}/pgo -fprofile-dir=${T}/pgo"
+
+		# Used in test suite.
+		unset A
+
+		emake CFLAGS="${CFLAGS} -fprofile-generate=${T}/pgo -fprofile-dir=${T}/pgo" -k check
+
+		if tc-is-clang; then
+			llvm-profdata merge "${T}"/pgo --output="${T}"/pgo/default.profdata || die
+		fi
+
+		# Rebuild Bash using the profiling data we just generated.
+		emake clean
+		emake CFLAGS="${CFLAGS} -fprofile-use=${T}/pgo -fprofile-dir=${T}/pgo"
+
+		use plugins && emake -C examples/loadables CFLAGS="${CFLAGS} -fprofile-use=${T}/pgo -fprofile-dir=${T}/pgo" all others
+	else
+		emake
+
+		use plugins && emake -C examples/loadables all others
+	fi
+}
+
+src_test() {
+	# Used in test suite.
+	unset A
+
+	default
+}
+
+src_install() {
+	local d f
+
+	default
+
+	dodir /bin
+	mv "${ED}"/usr/bin/bash "${ED}"/bin/ || die
+	dosym bash /bin/rbash
+
+	insinto /etc/bash
+	doins "${FILESDIR}"/bash_logout
+	doins "$(prefixify_ro "${FILESDIR}"/bashrc)"
+
+	keepdir /etc/bash/bashrc.d
+
+	insinto /etc/skel
+	for f in bash{_logout,_profile,rc} ; do
+		newins "${FILESDIR}"/dot-${f} .${f}
+	done
+
+	local sed_args=(
+		-e 's:#GNU#@::'
+		-e '/#@/d'
+	)
+
+	if ! use readline ; then
+		# bug #432338
+		sed_args+=(
+			-e '/^shopt -s histappend/s:^:#:'
+			-e 's:use_color=true:use_color=false:'
+		)
+	fi
+
+	sed -i \
+		"${sed_args[@]}" \
+		"${ED}"/etc/skel/.bashrc \
+		"${ED}"/etc/bash/bashrc || die
+
+	if use plugins ; then
+		exeinto /usr/$(get_libdir)/bash
+		doexe $(echo examples/loadables/*.o | sed 's:\.o::g')
+
+		insinto /usr/include/bash-plugins
+		doins *.h builtins/*.h include/*.h lib/{glob/glob.h,tilde/tilde.h}
+	fi
+
+	if use examples ; then
+		for d in examples/{functions,misc,scripts,startup-files} ; do
+			exeinto /usr/share/doc/${PF}/${d}
+			docinto ${d}
+			for f in ${d}/* ; do
+				if [[ ${f##*/} != PERMISSION ]] && [[ ${f##*/} != *README ]] ; then
+					doexe ${f}
+				else
+					dodoc ${f}
+				fi
+			done
+		done
+	fi
+
+	# Install bash_builtins.1 and rbash.1
+	emake -C doc DESTDIR="${D}" install_builtins
+	sed 's:bash\.1:man1/&:' doc/rbash.1 > "${T}"/rbash.1 || die
+	doman "${T}"/rbash.1
+
+	newdoc CWRU/changelog ChangeLog
+	dosym bash.info /usr/share/info/bashref.info
+}
+
+pkg_preinst() {
+	if [[ -e ${EROOT}/etc/bashrc ]] && [[ ! -d ${EROOT}/etc/bash ]] ; then
+		mkdir -p "${EROOT}"/etc/bash
+		mv -f "${EROOT}"/etc/bashrc "${EROOT}"/etc/bash/
+	fi
+}
+
+pkg_postinst() {
+	# If /bin/sh does not exist, provide it
+	if [[ ! -e ${EROOT}/bin/sh ]] ; then
+		ln -sf bash "${EROOT}"/bin/sh
+	fi
+}
diff --git a/app-shells/bash/bash-9999.ebuild b/app-shells/bash/bash-9999.ebuild
index 7d9c7837f3c1..105e8c1c815e 100644
--- a/app-shells/bash/bash-9999.ebuild
+++ b/app-shells/bash/bash-9999.ebuild
@@ -290,7 +290,7 @@ src_install() {
 	done
 
 	local sed_args=(
-		-e "s:#${USERLAND}#@::"
+		-e 's:#GNU#@::'
 		-e '/#@/d'
 	)
 
-- 
cgit v1.2.3-65-gdbad