Initial version of pptp ebuild.

3 files changed, 105 insertions, 0 deletions

diff --git a/net-dialup/pptpd/files/digest-pptpd-1.1.2 b/net-dialup/pptpd/files/digest-pptpd-1.1.2
new file mode 100644
index 000000000000..8c9f975d30c4
--- /dev/null
+++ b/net-dialup/pptpd/files/digest-pptpd-1.1.2
@@ -0,0 +1 @@
+MD5 03f7106c6fd7f22bd904b5c66aedbe92 pptpd-1.1.2.tar.gz 115418
diff --git a/net-dialup/pptpd/files/options.pptpd b/net-dialup/pptpd/files/options.pptpd
new file mode 100644
index 000000000000..cfbbd01231f3
--- /dev/null
+++ b/net-dialup/pptpd/files/options.pptpd
@@ -0,0 +1,20 @@
+## SAMPLE ONLY
+## CHANGE TO SUIT YOUR SYSTEM
+
+## turn pppd syslog debugging on
+#debug
+
+## change 'servername' to whatever you specify as your server name in chap-secrets
+name pptp-server
+
+auth
+require-chap
+proxyarp
+lock
++chap
++chapms
++chapms-v2
+mppe-40
+mppe-128
+mppe-stateless
+
diff --git a/net-dialup/pptpd/files/pptpd.conf b/net-dialup/pptpd/files/pptpd.conf
new file mode 100644
index 000000000000..690ffd77ded6
--- /dev/null
+++ b/net-dialup/pptpd/files/pptpd.conf
@@ -0,0 +1,84 @@
+################################################################################
+#
+# Sample PoPToP configuration file
+#
+# for PoPToP version 1.0.0
+#
+################################################################################
+
+# TAG: speed
+#
+#	Specifies the speed for the PPP daemon to talk at.
+#	Some PPP daemons will ignore this value.
+#
+#speed 115200
+
+# TAG: option
+#
+#	Specifies the location of the PPP options file.
+#	By default PPP looks in '/etc/ppp/options'
+#
+option /etc/ppp/options.pptpd
+
+# TAG: debug
+#
+#	Turns on (more) debugging to syslog.
+#
+#debug
+
+# TAG: localip
+# TAG: remoteip
+#
+#	Specifies the local and remote IP address ranges.
+#
+#	You can specify single IP addresses seperated by commas or you can
+#	specify ranges, or both. For example:
+#
+#		192.168.0.234,192.168.0.245-249,192.168.0.254
+#
+#	IMPORTANT RESTRICTIONS:
+#
+#	1. No spaces are permitted between commas or within addresses.
+#
+#	2. If you give more IP addresses than MAX_CONNECTIONS, it will
+#	   start at the beginning of the list and go until it gets 
+#	   MAX_CONNECTIONS IPs. Others will be ignored.
+#
+#	3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
+#	   you must type 234-238 if you mean this.
+#
+#	4. If you give a single localIP, that's ok - all local IPs will
+#	   be set to the given one. You MUST still give at least one remote
+#	   IP for each simultaneous client.
+#
+#localip 192.168.0.234-238,192.168.0.245
+#remoteip 192.168.1.234-238,192.168.1.245
+
+# TAG: ipxnets
+#
+#	This gives the range of IPX networks to allocate to clients.  By
+#	default IPX network number allocation is not handled internally.
+#	By putting a low and high network number here a pool of IPX networks
+#	can be defined.  If this is done then there must be one IPX network
+#	per client.
+#
+#	The format is a pair of hex numbers without any 0x prefix separated
+#	by a hyphen.
+#
+#ipxnets 00001000-00001FFF
+
+# TAG: listen
+#
+#	Defines the IP address of the local interface on which pptpd
+#	should listen for connections.  The default is to listen on all
+#	local interfaces (even ones brought up by pptp connections, thus
+#	permitting pptp tunnels inside the pptp tunnels).
+#
+#listen 192.168.0.1
+
+# TAG: pidfile
+#
+#	This defines the file name in which pptpd should store its process
+#	ID (or pid).  The default is /var/run/pptpd.pid.
+#
+#pidfile /var/run/pptpd.pid