Moved from net-www/plb to www-servers/plb.

6 files changed, 167 insertions, 0 deletions

diff --git a/www-servers/plb/ChangeLog b/www-servers/plb/ChangeLog
new file mode 100644
index 000000000000..da97d00cf92e
--- /dev/null
+++ b/www-servers/plb/ChangeLog
@@ -0,0 +1,20 @@
+# ChangeLog for net-www/plb
+# Copyright 2000-2004 Gentoo Foundation; Distributed under the GPL v2
+# $Header: /var/cvsroot/gentoo-x86/www-servers/plb/ChangeLog,v 1.1 2004/08/08 17:56:08 stuart Exp $
+
+*plb-0.3 (08 Aug 2004)
+
+  08 Aug 2004; Stuart Herbert <stuart@gentoo.org> +files/plb.conf,
+  +files/plb.rc6, +plb-0.3.ebuild:
+  Moved from net-www/plb to www-servers/plb.
+
+  01 Jul 2004; Jeremy Huddleston <eradicator@gentoo.org> plb-0.3.ebuild:
+  virtual/glibc -> virtual/libc
+
+  11 Jun 2004; Bryan Østergaard <kloeri@gentoo.org> plb-0.3.ebuild:
+  Stable on alpha.
+
+*plb-0.3 (28 Feb 2003)
+
+  28 Feb 2003; Mike Frysinger <vapier@gentoo.org> :
+  Initial import.  Ebuild submitted by the maintainer of plb for #16423.
diff --git a/www-servers/plb/Manifest b/www-servers/plb/Manifest
new file mode 100644
index 000000000000..165b10e32de5
--- /dev/null
+++ b/www-servers/plb/Manifest
@@ -0,0 +1,5 @@
+MD5 9b8f0987a9b9981a8014e8afd4939944 plb-0.3.ebuild 975
+MD5 bb7099ae4fcba033dd573365b4c35368 ChangeLog 542
+MD5 e9b720f638fa4922636a7b21acd816c3 files/digest-plb-0.3 59
+MD5 55e53cfddf06cc8f514a175581cc09bd files/plb.conf 2428
+MD5 8e516d93ef83b6b288f203fec57c8e23 files/plb.rc6 392
diff --git a/www-servers/plb/files/digest-plb-0.3 b/www-servers/plb/files/digest-plb-0.3
new file mode 100644
index 000000000000..92f29169bd4b
--- /dev/null
+++ b/www-servers/plb/files/digest-plb-0.3
@@ -0,0 +1 @@
+MD5 74c1dee5387afc6cff169b0cf8767bbd plb-0.3.tar.gz 101701
diff --git a/www-servers/plb/files/plb.conf b/www-servers/plb/files/plb.conf
new file mode 100644
index 000000000000..52fb134832aa
--- /dev/null
+++ b/www-servers/plb/files/plb.conf
@@ -0,0 +1,84 @@
+
+#
+# PURE LOAD BALANCER - Sample configuration file
+#
+# Put this file into /etc/plb.conf, or run the load balancer with
+# plb -c /path/to/plb.conf
+#
+
+
+
+# This is the IP address and port the load balancer answers on.
+# To listen to all interfaces, just use 0.0.0.0 for the IP address.
+
+listen_ip                    0.0.0.0
+listen_port                  80
+
+# Bind family. 0 for IPv4, 1 for IPv6.
+
+bind_ipv6                    0
+
+# Protocol to balance : HTTP (SMTP is not implemented yet)
+
+protocol                     HTTP
+
+# IP addresses of the real web servers. Use space as a separator.
+# IPv4 and IPv6 addresses are allowed.
+
+servers_ip                   10.1.1.1 10.1.1.2 10.1.1.3
+servers_port                 80
+
+# After binding ports, the load balancer chroots to an empty (recommended)
+# directory, and drops privileges.
+
+user                         nobody
+group                        nobody
+chroot_dir                   /var/empty
+
+# Timeouts to avoid clients use unneeded slots on your servers
+# with idle connections. Values are in seconds.
+
+timeout_header_client_read   30
+timeout_header_client_write  30
+timeout_header_server_read   30
+timeout_header_server_write  30
+timeout_forward_client_read  30
+timeout_forward_client_write 30
+timeout_forward_server_read  30
+timeout_forward_server_write 30
+
+# When a server goes down, the load balancer will try to probe it at regular
+# interval in order to bring it back to life.
+# This is the delay, in seconds, between probes.
+
+timeout_cleanup              15
+
+# Really mark a server down after this many consecutive failures.
+
+server_retry                 5
+
+# The total maximal number of clients to allow
+
+max_clients                  1000
+
+# The backlog. Try something like (max_clients / 10) for extreme cases.
+
+backlog                      100
+
+# The log file verbosity.
+# 0 => everything, including debugging info (not recommended)
+# 1 => all errors, all warnings, all common notifications
+# 2 => all errors, all warnings
+# 3 => quiet mode, fatal errors only
+# default is 2. Leave this commented if you want to override it with
+# the -d command-line switch.
+
+# log_level                    2
+
+# By default, PLB will send error to the standard error file descriptor,
+# thus making it possible to use software like multilog.
+# If you want the load balancer to directly write to a file, uncomment the
+# following line :
+
+# log_file                     /var/log/plb.log
+
diff --git a/www-servers/plb/files/plb.rc6 b/www-servers/plb/files/plb.rc6
new file mode 100644
index 000000000000..89dc3cd8b395
--- /dev/null
+++ b/www-servers/plb/files/plb.rc6
@@ -0,0 +1,19 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+	need net
+}
+
+start() {
+	ebegin "Starting plb"
+	start-stop-daemon --start --quiet --exec /usr/bin/plb -- --daemonize --config=/etc/plb.conf
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping plb"
+	start-stop-daemon --stop --quiet --pidfile /var/run/plb.pid
+	eend $?
+}
diff --git a/www-servers/plb/plb-0.3.ebuild b/www-servers/plb/plb-0.3.ebuild
new file mode 100644
index 000000000000..dd3e175a4f76
--- /dev/null
+++ b/www-servers/plb/plb-0.3.ebuild
@@ -0,0 +1,38 @@
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/www-servers/plb/plb-0.3.ebuild,v 1.1 2004/08/08 17:56:08 stuart Exp $
+
+DESCRIPTION="A free high-performance HTTP load balancer"
+SRC_URI="http://plb.sunsite.dk/files/${P}.tar.gz"
+HOMEPAGE="http://plb.sunsite.dk/"
+
+SLOT="0"
+LICENSE="BSD"
+KEYWORDS="x86 ~ppc ~sparc alpha"
+IUSE=""
+
+DEPEND="virtual/libc
+	>=dev-libs/libevent-0.6"
+
+src_compile() {
+	econf || die
+	emake || die "compile problem"
+}
+
+src_install() {
+	einstall || die
+
+	dodoc AUTHORS CONTACT ChangeLog README NEWS THANKS
+
+	insinto /etc/
+	doins ${FILESDIR}/plb.conf
+	exeinto /etc/init.d
+	newexe ${FILESDIR}/plb.rc6 plb
+}
+
+pkg_postinst() {
+	einfo "Before starting Pure Load Balancer, you have to edit the /etc/plb.conf file."
+	echo
+	ewarn "It's *really* important to read the README provided with the software."
+	ewarn "Just point your browser at http://plb.sunsite.dk/README"
+}