Pulling old snapshots.

5 files changed, 5 insertions, 2268 deletions

diff --git a/x11-base/xfree/ChangeLog b/x11-base/xfree/ChangeLog
index b9e76c7262c8..997f764080d1 100644
--- a/x11-base/xfree/ChangeLog
+++ b/x11-base/xfree/ChangeLog
@@ -1,6 +1,10 @@
 # ChangeLog for x11-base/xfree
 # Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xfree/ChangeLog,v 1.275 2004/02/06 23:36:06 cyfred Exp $
+# $Header: /var/cvsroot/gentoo-x86/x11-base/xfree/ChangeLog,v 1.276 2004/02/09 12:31:17 spyderous Exp $
+
+  09 Feb 2004; Donnie Berkholz <spyderous@gentoo.org>; xfree-4.3.99.16.ebuild,
+  xfree-4.3.99.901.ebuild:
+  Pulling old snapshots.
 
   07 Feb 2004; Andrew Bevitt <cyfred@gentoo.org>; xfree-4.3.0-r3.ebuild,
   xfree-4.3.99.16.ebuild, xfree-4.3.99.901.ebuild, xfree-4.3.99.902.ebuild:
diff --git a/x11-base/xfree/files/digest-xfree-4.3.99.16 b/x11-base/xfree/files/digest-xfree-4.3.99.16
deleted file mode 100644
index 6998397a3791..000000000000
--- a/x11-base/xfree/files/digest-xfree-4.3.99.16
+++ /dev/null
@@ -1,20 +0,0 @@
-MD5 9060c02f9e07620b8595e4d3da77a4b3 XFree86-4.3.99.16.tar.bz2 41874118
-MD5 4d7d5fdc4ed56c144ef998302581478c eurofonts-X11.tar.bz2 8811
-MD5 cfdef5d00cd4a7937ff4bc136dab1932 xfsft-encodings.tar.bz2 11811
-MD5 d0fab996daf97adf095e2dad0bd9012e gentoo-cursors-tad-0.3.1.tar.bz2 1196991
-MD5 cbdc2fdd7d2ed0832795e86a8b9ee19a andale32.exe 198384
-MD5 9637df0e91703179f0723ec095a36cb5 arial32.exe 554208
-MD5 c9089ae0c3b3d0d8c4b0a95979bb9ff0 arialb32.exe 168176
-MD5 2b30de40bb5e803a0452c7715fc835d1 comic32.exe 246008
-MD5 4e412c772294403ab62fb2d247d85c60 courie32.exe 646368
-MD5 4d90016026e2da447593b41a8d8fa8bd georgi32.exe 392440
-MD5 7907c7dd6684e9bade91cff82683d9d7 impact32.exe 173288
-MD5 ed39c8ef91b9fb80f76f702568291bd5 times32.exe 661728
-MD5 0d7ea16cac6261f8513a061fbfcdb2b5 trebuc32.exe 357200
-MD5 12d2a75f8156e10607be1eaa8e8ef120 verdan32.exe 351992
-MD5 230a1d13a365b22815f502eb24d9149b webdin32.exe 185072
-MD5 3d4ee581df78c9dacc6e97aa07a1af72 gemini-koi8-u.tar.bz2 439173
-MD5 0bc551413e1a76279f592343061775fe XFree86-4.3.99.16-files-0.2.tar.bz2 10728
-MD5 222bffcae6c2be37ec5cd993037f4f45 xf86Wacom.c.gz 26156
-MD5 537bb3e2da7642bd979ebc1cafa8dce7 savage-1.1.27t.zip 76974
-MD5 697ffa066c71109c993939bb36f3198b XFree86-4.3.99.16-patches-0.5.tar.bz2 80885
diff --git a/x11-base/xfree/files/digest-xfree-4.3.99.901 b/x11-base/xfree/files/digest-xfree-4.3.99.901
deleted file mode 100644
index 26025b32fd22..000000000000
--- a/x11-base/xfree/files/digest-xfree-4.3.99.901
+++ /dev/null
@@ -1,20 +0,0 @@
-MD5 110b2eb9ca59fc2794e6ab46ec5c86a8 XFree86-4.3.99.901.tar.bz2 41901428
-MD5 4d7d5fdc4ed56c144ef998302581478c eurofonts-X11.tar.bz2 8811
-MD5 cfdef5d00cd4a7937ff4bc136dab1932 xfsft-encodings.tar.bz2 11811
-MD5 d0fab996daf97adf095e2dad0bd9012e gentoo-cursors-tad-0.3.1.tar.bz2 1196991
-MD5 cbdc2fdd7d2ed0832795e86a8b9ee19a andale32.exe 198384
-MD5 9637df0e91703179f0723ec095a36cb5 arial32.exe 554208
-MD5 c9089ae0c3b3d0d8c4b0a95979bb9ff0 arialb32.exe 168176
-MD5 2b30de40bb5e803a0452c7715fc835d1 comic32.exe 246008
-MD5 4e412c772294403ab62fb2d247d85c60 courie32.exe 646368
-MD5 4d90016026e2da447593b41a8d8fa8bd georgi32.exe 392440
-MD5 7907c7dd6684e9bade91cff82683d9d7 impact32.exe 173288
-MD5 ed39c8ef91b9fb80f76f702568291bd5 times32.exe 661728
-MD5 0d7ea16cac6261f8513a061fbfcdb2b5 trebuc32.exe 357200
-MD5 12d2a75f8156e10607be1eaa8e8ef120 verdan32.exe 351992
-MD5 230a1d13a365b22815f502eb24d9149b webdin32.exe 185072
-MD5 3d4ee581df78c9dacc6e97aa07a1af72 gemini-koi8-u.tar.bz2 439173
-MD5 41725543cce9a2e417f92f0425f46bc2 XFree86-4.3.99.901-files-0.1.tar.bz2 10772
-MD5 222bffcae6c2be37ec5cd993037f4f45 xf86Wacom.c.gz 26156
-MD5 537bb3e2da7642bd979ebc1cafa8dce7 savage-1.1.27t.zip 76974
-MD5 1895f7687f109390a2855195b1a9cf50 XFree86-4.3.99.901-patches-0.1.tar.bz2 88371
diff --git a/x11-base/xfree/xfree-4.3.99.16.ebuild b/x11-base/xfree/xfree-4.3.99.16.ebuild
deleted file mode 100644
index c34a20c02d1e..000000000000
--- a/x11-base/xfree/xfree-4.3.99.16.ebuild
+++ /dev/null
@@ -1,1128 +0,0 @@
-# Copyright 1999-2004 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xfree/xfree-4.3.99.16.ebuild,v 1.10 2004/02/06 23:36:06 cyfred Exp $
-
-# Make sure Portage does _NOT_ strip symbols.  We will do it later and make sure
-# that only we only strip stuff that are safe to strip ...
-RESTRICT="nostrip"
-
-# IUSE="sse mmx 3dnow" are disabled in favor of autodetection
-# IUSE="gatos" disabled because gatos is broken on ~4.4 now (31 Jan 2004)
-IUSE="3dfx xml2 truetype nls cjk doc ipv6 debug static pam sdk"
-# INPUT_DEVICES="synaptics"
-
-filter-flags "-funroll-loops"
-
-ALLOWED_FLAGS="-fstack-protector -march -mcpu -O -O1 -O2 -O3 -pipe -fomit-frame-pointer"
-
-# Recently there has been a lot of stability problem in Gentoo-land.  Many
-# things can be the cause to this, but I believe that it is due to gcc3
-# still having issues with optimizations, or with it not filtering bad
-# combinations (protecting the user maybe from themselves) yet.
-#
-# This can clearly be seen in large builds like glibc, where too aggressive
-# CFLAGS cause the tests to fail miserbly.
-#
-# Quote from Nick Jones <carpaski@gentoo.org>, who in my opinion
-# knows what he is talking about:
-#
-#   People really shouldn't force code-specific options on... It's a
-#   bad idea. The -march options aren't just to look pretty. They enable
-#   options that are sensible (and include sse,mmx,3dnow when apropriate).
-#
-# The next command strips CFLAGS and CXXFLAGS from nearly all flags.  If
-# you do not like it, comment it, but do not bugreport if you run into
-# problems.
-#
-# <azarah@gentoo.org> (13 Oct 2002)
-strip-flags
-
-# Are we using a snapshot ?
-USE_SNAPSHOT="yes"
-
-FILES_VER="0.2"
-PATCH_VER="0.5"
-FT2_VER="2.1.4"
-XCUR_VER="0.3.1"
-SISDRV_VER="311003-1"
-SAVDRV_VER="1.1.27t"
-MGADRV_VER="1_3_0beta"
-#VIADRV_VER="0.1"
-
-BASE_PV="${PV}"
-MY_SV="XFree86-${BASE_PV}"
-
-S="${WORKDIR}/xc"
-FILES_DIR="${WORKDIR}/files"
-PATCH_DIR="${WORKDIR}/patch"
-
-SRC_PATH0="ftp://ftp.xfree86.org/pub/XFree86/develsnaps"
-
-HOMEPAGE="http://www.xfree.org"
-
-# Misc patches we may need to fetch ..
-X_PATCHES="http://dev.gentoo.org/~spyderous/xfree/patchsets/${PV}/XFree86-${PV}-patches-${PATCH_VER}.tar.bz2"
-
-X_DRIVERS="http://people.mandrakesoft.com/~flepied/projects/wacom/xf86Wacom.c.gz
-	http://www.probo.com/timr/savage-${SAVDRV_VER}.zip"
-#	http://www.winischhofer.net/sis/sis_drv_src_${SISDRV_VER}.tar.gz"
-#	mirror://gentoo/XFree86-${PV}-drivers-via-${VIADRV_VER}.tar.bz2
-# Updated Wacom driver:  http://people.mandrakesoft.com/~flepied/projects/wacom/
-# Latest Savage drivers:  http://www.probo.com/timr/savage40.html
-# Latest SIS drivers:  http://www.winischhofer.net/
-
-# For the MS Core fonts ..
-MS_COREFONTS="./andale32.exe ./arial32.exe
-	./arialb32.exe ./comic32.exe
-	./courie32.exe ./georgi32.exe
-	./impact32.exe ./times32.exe
-	./trebuc32.exe ./verdan32.exe
-	./webdin32.exe"
-#	./IELPKTH.CAB"
-# Need windows license to use this one
-MS_FONT_URLS="${MS_COREFONTS//\.\//mirror://sourceforge/corefonts/}"
-
-GENTOO_FILES="http://dev.gentoo.org/~spyderous/xfree/patchsets/${PV}/XFree86-${PV}-files-${FILES_VER}.tar.bz2"
-
-SRC_URI="${SRC_PATH0}/${MY_SV}.tar.bz2
-	mirror://gentoo/eurofonts-X11.tar.bz2
-	mirror://gentoo/xfsft-encodings.tar.bz2
-	mirror://gentoo/gentoo-cursors-tad-${XCUR_VER}.tar.bz2
-	truetype? ( ${MS_FONT_URLS} )
-	nls? ( mirror://gentoo/gemini-koi8-u.tar.bz2 )
-	${GENTOO_FILES}
-	${X_DRIVERS}
-	${X_PATCHES}"
-
-LICENSE="X11 MSttfEULA"
-SLOT="0"
-KEYWORDS="~x86 ~ppc"
-
-# sys-apps/portage for USE_EXPAND
-DEPEND=">=sys-apps/baselayout-1.8.3
-	>=sys-libs/ncurses-5.1
-	>=sys-libs/zlib-1.1.3-r2
-	>=sys-devel/flex-2.5.4a-r5
-	>=dev-libs/expat-1.95.3
-	>=media-libs/freetype-${FT2_VER}
-	>=media-libs/fontconfig-2.1-r1
-	>=x11-base/opengl-update-1.4
-	>=x11-misc/ttmkfdir-3.0.4
-	>=sys-apps/sed-4
-	dev-lang/perl
-	media-libs/libpng
-	app-arch/unzip
-	pam? ( >=sys-libs/pam-0.75 )
-	truetype? ( app-arch/cabextract )
-	>=sys-apps/portage-2.0.49-r13
-	!x11-libs/xft"
-# RDEPEND="${DEPEND}"
-# unzip - needed for savage driver (version 1.1.27t)
-# x11-libs/xft -- blocked because of interference with xfree's
-
-PDEPEND="x86? (
-			3dfx? ( >=media-libs/glide-v3-3.10 )
-			input_devices_synaptics? ( x11-misc/synaptics )
-		)"
-
-PROVIDE="virtual/x11
-	virtual/opengl
-	virtual/glu
-	virtual/xft"
-
-#inherit needs to happen *after* DEPEND has been defined to have "newdepend"
-#do the right thing. Otherwise RDEPEND doesn't get set properly.
-inherit eutils flag-o-matic gcc xfree
-
-
-DESCRIPTION="Xfree86: famous and free X server"
-
-pkg_setup() {
-	# Hack for patch 9132.
-#	if [ ! -e "/usr/src/linux" ] || \
-#		( [ -e "/usr/src/linux" ] && \
-#		is_kernel "2" "4" ) ; then
-#			ewarn "If you compile this against a 2.4 kernel and later switch"
-#			ewarn "to a 2.6 kernel, you must recompile xfree or OpenGL"
-#			ewarn "applications will segfault."
-#			ewarn "It compiles for 2.4 if no /usr/src/linux exists."
-	# Tell about new INPUT_DEVICES
-	einfo "The Synaptics driver is no longer built within XFree."
-	einfo "To pull it in, set INPUT_DEVICES=\"synaptics\" in make.conf"
-	einfo "or on the command line."
-#	sleep 4	
-			echo -ne "\a" ; sleep 0.1 &>/dev/null ; sleep 0,1 &>/dev/null
-			echo -ne "\a" ; sleep 1
-			echo -ne "\a" ; sleep 0.1 &>/dev/null ; sleep 0,1 &>/dev/null
-			echo -ne "\a" ; sleep 1
-			echo -ne "\a" ; sleep 0.1 &>/dev/null ; sleep 0,1 &>/dev/null
-			echo -ne "\a" ; sleep 1
-			echo -ne "\a" ; sleep 0.1 &>/dev/null ; sleep 0,1 &>/dev/null
-			echo -ne "\a" ; sleep 1
-			echo -ne "\a" ; sleep 0.1 &>/dev/null ; sleep 0,1 &>/dev/null
-			echo -ne "\a" ; sleep 1
-#	fi
-
-}
-
-src_unpack() {
-
-	# Unpack source and patches
-	ebegin "Unpacking source"
-	unpack ${MY_SV}.tar.bz2 > /dev/null
-	eend 0
-
-	ebegin "Unpacking Gentoo files and patches"
-	unpack XFree86-${PV}-files-${FILES_VER}.tar.bz2 > /dev/null
-	unpack XFree86-${PV}-patches-${PATCH_VER}.tar.bz2 > /dev/null
-	eend 0
-
-	# Unpack TaD's gentoo cursors
-	ebegin "Unpacking Gentoo cursors"
-	unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
-	eend 0
-
-	# Unpack extra fonts stuff from Mandrake
-	ebegin "Unpacking fonts"
-	if use nls
-	then
-		unpack gemini-koi8-u.tar.bz2 > /dev/null
-	fi
-	unpack eurofonts-X11.tar.bz2 > /dev/null
-	unpack xfsft-encodings.tar.bz2 > /dev/null
-	eend 0
-
-	# Remove bum encoding
-	rm -f ${WORKDIR}/usr/X11R6/lib/X11/fonts/encodings/urdunaqsh-0.enc
-
-	# Update the Savage Driver
-	# savage driver 1.1.27t is a .zip and contains a savage directory
-	# (that's why we have to be in drivers, not in savage subdir).
-	# Could be USE flag based
-
-	ebegin "Updating Savage driver"
-	cd ${S}/programs/Xserver/hw/xfree86/drivers
-	unpack savage-${SAVDRV_VER}.zip > /dev/null
-	ln -s ${S}/programs/Xserver/hw/xfree86/vbe/vbe.h \
-		${S}/programs/Xserver/hw/xfree86/drivers/savage
-	cd ${S}
-	eend 0
-
-#	ebegin "Updating SiS driver"
-#	cd ${S}/programs/Xserver/hw/xfree86/drivers/sis
-#	unpack sis_drv_src_${SISDRV_VER}.tar.gz > /dev/null
-#	ln -s ${S}/programs/Xserver/hw/xfree86/vbe/vbe.h \
-#		${S}/programs/Xserver/hw/xfree86/drivers/sis
-#	cd ${S}
-#	eend 0
-
-	# The 0120 patch is broken, the 0127 may also be broken.
-	mv -f ${PATCH_DIR}/0120*parallel-make* ${PATCH_DIR}/excluded
-	mv -f ${PATCH_DIR}/0127*makefile-fastbuild* ${PATCH_DIR}/excluded
-
-	# We dont have an implementation for S/390's yet...
-	if [ ! "${ARCH}" = "s390" ]
-	then
-		mv -f ${PATCH_DIR}/7500* ${PATCH_DIR}/excluded
-	fi
-
-	if use debug
-	then
-		mv -f ${PATCH_DIR}/5901*acecad-debug* ${PATCH_DIR}/excluded
-	fi
-
-	# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
-	if [ "`use 3dfx`" -a "${TDFX_RISKY}" = "yes" ]
-	then
-		mv -f ${PATCH_DIR}/5850* ${PATCH_DIR}/excluded
-	else
-		mv -f ${PATCH_DIR}/5851* ${PATCH_DIR}/excluded
-	fi
-
-	# Bulk patching - based on patch name
-	# Will create excluded stuff once it's needed
-	cd ${WORKDIR}
-	EPATCH_SUFFIX="patch" \
-	epatch ${PATCH_DIR}
-	cd ${S}
-
-	# Update Wacom Driver, hopefully resolving bug #1632
-	# The kernel driver should prob also be updated, this can be
-	# found at:
-	#
-	#  http://people.mandrakesoft.com/~flepied/projects/wacom/
-	#
-	if ( [ -e "/usr/src/linux" ] && \
-		[ ! `is_kernel "2" "2"` ] ) || \
-		[ "`uname -r | cut -d. -f1,2`" != "2.2" ]
-	then
-		ebegin "Updating Wacom USB Driver"
-		gzip -dc ${DISTDIR}/xf86Wacom.c.gz > \
-			${S}/programs/Xserver/hw/xfree86/input/wacom/xf86Wacom.c || die
-		eend 0
-	fi
-
-	# Unpack the MS fonts
-	if use truetype
-	then
-		einfo "Unpacking MS Core Fonts..."
-		mkdir -p ${WORKDIR}/truetype; cd ${WORKDIR}/truetype
-		for x in ${MS_COREFONTS}
-		do
-			if [ -f ${DISTDIR}/${x} ]
-			then
-				einfo "  ${x/\.\/}..."
-				cabextract --lowercase ${DISTDIR}/${x} > /dev/null || die
-			fi
-		done
-		ebegin "Done unpacking Core Fonts"; eend 0
-	fi
-
-	ebegin "Setting up config/cf/host.def"
-	cd ${S}; cp ${FILES_DIR}/site.def config/cf/host.def || die
-	echo "#define XVendorString \"Gentoo Linux (XFree86 ${PV}, revision ${PR})\"" \
-		>> config/cf/host.def
-
-	# Xwrapper has been removed so we now need to use the set uid server
-	# again, this mustve happened somewhere after 4.3.0 in the development.
-	echo "#define InstallXserverSetUID YES" >> config/cf/host.def
-	echo "#define BuildServersOnly NO" >> config/cf/host.def
-
-	# Bug #12775 .. fails with -Os.
-	replace-flags "-Os" "-O2"
-
-	if [ "`gcc-version`" != "2.95" ]
-	then
-		# Should fix bug #4189.  gcc 3.x have problems with -march=pentium4
-		# and -march=athlon-tbird
-
-		if [ "`gcc-version`" != "3.3" ]
-		then
-			replace-flags "-march=pentium4" "-march=pentium3"
-			replace-flags "-march=athlon-tbird" "-march=athlon"
-		fi
-
-		# Without this, modules breaks with gcc3
-		if [ "`gcc-version`" = "3.1" ]
-		then
-			append-flags "-fno-merge-constants"
-			append-flags "-fno-merge-constants"
-		fi
-	fi
-
-	if ( [ -e "/usr/src/linux" ] && \
-		[ ! `is_kernel "2" "2"` ] ) || \
-		[ "`uname -r | cut -d. -f1,2`" != "2.2" ]
-	then
-		echo "#define HasLinuxInput YES" >> config/cf/host.def
-	fi
-
-	echo "#define CcCmd ${CC}" >> config/cf/host.def
-	echo "#define OptimizedCDebugFlags ${CFLAGS}" >> config/cf/host.def
-	echo "#define OptimizedCplusplusDebugFlags ${CXXFLAGS}" >> config/cf/host.def
-
-	if [ -n "`use debug`" -o -n "`use static`" ]
-	then
-		echo "#define DoLoadableServer	NO" >>config/cf/host.def
-	fi
-
-	if use debug
-	then
-		echo "#define XFree86Devel	YES" >> config/cf/host.def
-	else
-		echo "#define ExtraXInputDrivers acecad" >> config/cf/host.def
-
-		# use less ram .. got this from Spider's makeedit.eclass :)
-		echo "#define GccWarningOptions -Wno-return-type -w" \
-			>> config/cf/host.def
-	fi
-
-	if use pam
-	then
-		# If you want to have optional pam support, do it properly ...
-		echo "#define HasPam YES" >> config/cf/host.def
-		echo "#define HasPamMisc YES" >> config/cf/host.def
-	else
-		echo "#define HasPam NO" >> config/cf/host.def
-		echo "#define HasPamMisc NO" >> config/cf/host.def
-	fi
-
-	if use nls
-	then
-		echo "#define XtermWithI18N YES" >> config/cf/host.def
-	fi
-
-	if [ "${ARCH}" = "x86" ] && false # I think we should let X decide this ..
-	then
-		# optimize Mesa for architecture
-		if use mmx
-		then
-			echo "#define HasMMXSupport	YES" >> config/cf/host.def
-			echo "#define MesaUseMMX YES" >> config/cf/host.def
-		else
-			echo "#define HasMMXSupport	NO" >> config/cf/host.def
-			echo "#define MesaUseMMX NO" >> config/cf/host.def
-		fi
-		if use mmx && use 3dnow
-		then
-			echo "#define Has3DNowSupport YES" >> config/cf/host.def
-			echo "#define MesaUse3DNow YES" >> config/cf/host.def
-		else
-			echo "#define Has3DNowSupport NO" >> config/cf/host.def
-			echo "#define MesaUse3DNow NO" >> config/cf/host.def
-		fi
-		if use mmx && use sse
-		then
-			echo "#define HasKatmaiSupport YES" >> config/cf/host.def
-			echo "#define MesaUseKatmai YES" >> config/cf/host.def
-		else
-			echo "#define HasKatmaiSupport NO" >> config/cf/host.def
-			echo "#define MesaUseKatmai NO" >> config/cf/host.def
-		fi
-
-	fi
-
-	if [ "${ARCH}" = "x86" ]
-	then
-		# build with glide3 support? (build the tdfx_dri.o module)
-		if use 3dfx
-		then
-			echo "#define HasGlide3 YES" >> config/cf/host.def
-		fi
-
-		# Compile the VIA driver
-		echo "#define XF86ExtraCardDrivers via" >> config/cf/host.def
-	fi
-
-	if [ "${ARCH}" = "hppa" ]
-	then
-		echo "#define DoLoadableServer NO" >> config/cf/host.def
-	fi
-
-	if [ "${ARCH}" = "alpha" ]
-	then
-		echo "#define XF86CardDrivers mga nv tga s3virge sis rendition \
-			i740 tdfx cirrus tseng fbdev \
-			ati vga v4l glint" >> config/cf/host.def
-	fi
-
-	if [ "${ARCH}" = "ppc" ]
-	then
-		echo "#define XF86CardDrivers mga glint s3virge sis savage trident \
-			chips tdfx fbdev ati DevelDrivers vga nv imstt \
-			XF86OSCardDrivers XF86ExtraCardDrivers" >> config/cf/host.def
-	fi
-
-	if [ "${ARCH}" = "sparc" ]
-	then
-		echo "#define XF86CardDrivers sunffb sunleo suncg6 suncg3 suncg14 \
-		suntcx sunbw2 glint mga tdfx ati savage vesa vga fbdev \
-		XF86OSCardDrivers XF86ExtraCardDrivers \
-		DevelDrivers" >> config/cf/host.def
-	fi
-
-	if use xml2
-	then
-		echo "#define HasLibxml2 YES" >> config/cf/host.def
-	fi
-
-	# The definitions for fontconfig
-	echo "#define UseFontconfig YES" >> config/cf/host.def
-	echo "#define HasFontconfig YES" >> config/cf/host.def
-
-	# Use the xfree Xft2 lib
-	echo "#define SharedLibXft YES" >> config/cf/host.def
-
-	# Set up docs building
-	if use doc
-	then
-		local DOC="YES"
-	else
-		local DOC="NO"
-	fi
-
-	# with USE="X doc' circular dep w/ virtual/ghostscript
-	# echo "#define HasGhostScript ${DOC}" >> config/cf/host.def
-	echo "#define BuildLinuxDocText ${DOC}" >> config/cf/host.def
-	echo "#define BuildLinuxDocHtml ${DOC}" >> config/cf/host.def
-	echo "#define BuildLinuxDocPS ${DOC}" >> config/cf/host.def
-	echo "#define BuildSpecsDocs ${DOC}" >> config/cf/host.def
-	echo "#define BuildHtmlManPages ${DOC}" >> config/cf/host.def
-
-	# enable Japanese docs, optionally
-	if use cjk
-	then
-		echo "#define InstallJapaneseDocs ${DOC}" >> config/cf/host.def
-	fi
-
-	# Native Language Support Fonts
-	if [ -z "`use nls`" ]
-	then
-		echo "#define BuildCyrillicFonts NO" >> config/cf/host.def
-		echo "#define BuildArabicFonts NO" >> config/cf/host.def
-		echo "#define BuildGreekFonts NO" >> config/cf/host.def
-		echo "#define BuildHebrewFonts NO" >> config/cf/host.def
-		echo "#define BuildThaiFonts NO" >> config/cf/host.def
-
-		if [ -z "`use cjk`" ]
-		then
-			echo "#define BuildCIDFonts NO" >> config/cf/host.def
-			echo "#define BuildJapaneseFonts NO" >> config/cf/host.def
-			echo "#define BuildKoreanFonts NO" >> config/cf/host.def
-			echo "#define BuildChineseFonts NO" >> config/cf/host.def
-		fi
-	fi
-
-	if use ipv6
-	then
-		echo "#define BuildIPv6 YES" >> config/cf/host.def
-	else
-		echo "#define BuildIPv6 NO" >> config/cf/host.def
-	fi
-
-# Will uncomment this after kde, qt, and *box ebuilds are alterered to use
-# it
-#	if use xinerama
-#	then
-#		echo "#define BuildXinerama YES" >> config/cf/host.def
-#		echo "#define BuildXineramaLibrary YES" >> config/cf/host.def
-#	fi
-
-	# End the host.def definitions here
-	eend 0
-
-	cd ${S}
-	if use doc
-	then
-		# These are not included anymore as they are obsolete
-		rm -rf ${S}/doc/hardcopy/{XIE,PEX5}
-		for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}
-		do
-			if [ -f ${x} ]
-			then
-				cp ${x} ${x}.orig
-				grep -iv 'Load[[:space:]]*"\(pex5\|xie\)"' ${x}.orig > ${x}
-				rm -f ${x}.orig
-			fi
-		done
-	fi
-
-}
-
-src_compile() {
-
-	# Set MAKEOPTS to have proper -j? option ..
-	get_number_of_jobs
-
-	# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
-	# MAKEOPTS, they'll redefine an internal XFree86 Makefile variable and the
-	# xfree build will silently die. This is tricky to track down, so I'm
-	# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
-	# unset. (drobbins, 08 Mar 2003)
-	unset MAKE_OPTS
-
-	einfo "Building XFree86..."
-	FAST=1 emake World WORLDOPTS=  || die
-
-	if use nls
-	then
-		cd ${S}/nls
-		make || die
-		cd ${S}
-	fi
-
-}
-
-src_install() {
-
-	unset MAKE_OPTS
-
-	einfo "Installing XFree86..."
-	# gcc3 related fix.  Do this during install, so that our
-	# whole build will not be compiled without mmx instructions.
-	if [ "`gcc-version`" != "2.95" ] && [ "${ARCH}" = "x86" ]
-	then
-		make install DESTDIR=${D} || \
-		make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
-			CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
-			install DESTDIR=${D} || die
-	else
-		make install DESTDIR=${D} || die
-	fi
-
-	if use sdk # || use gatos
-	then
-		einfo "Installing XFree86 SDK..."
-		make install.sdk DESTDIR=${D} || die
-	fi
-
-	# This one needs to be in /usr/lib
-	insinto /usr/lib/pkgconfig
-	doins ${D}/usr/X11R6/lib/pkgconfig/{xcursor,xft}.pc
-	# Now remove the invalid xft.pc, and co ...
-	rm -rf ${D}/usr/X11R6/lib/pkgconfig
-
-	einfo "Installing man pages..."
-	make install.man DESTDIR=${D} || die
-	einfo "Compressing man pages..."
-	prepman /usr/X11R6
-
-	if use nls
-	then
-		cd ${S}/nls
-		make DESTDIR=${D} install || die
-	fi
-
-	# Make sure the user running xterm can only write to utmp.
-	fowners root:utmp /usr/X11R6/bin/xterm
-	fperms 2755 /usr/X11R6/bin/xterm
-
-	# Fix permissions on locale/common/*.so
-	for x in ${D}/usr/X11R6/lib/X11/locale/lib/common/*.so*
-	do
-		if [ -f ${x} ]
-		then
-			fperms 0755 `echo ${x} | sed -e "s|${D}||"`
-		fi
-	done
-
-	# Fix permissions on modules ...
-	for x in $(find ${D}/usr/X11R6/lib/modules -name '*.o') \
-	         $(find ${D}/usr/X11R6/lib/modules -name '*.so')
-	do
-		if [ -f ${x} ]
-		then
-			fperms 0755 `echo ${x} | sed -e "s|${D}||"`
-		fi
-	done
-
-	# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
-	# mess up other things that use xmkmf
-	ebegin "Fixing lib/X11/config/host.def"
-	cp ${D}/usr/X11R6/lib/X11/config/host.def ${T}
-	awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
-		${T}/host.def > ${D}/usr/X11R6/lib/X11/config/host.def
-	# theoretically, /usr/X11R6/lib/X11/config is a possible candidate for
-	# config file management. If we find that people really worry about imake
-	# stuff, we may add it.  But for now, we leave the dir unprotected.
-	eend 0
-
-	insinto /etc/X11
-	# We still use freetype for now ...
-	doins ${FILES_DIR}/XftConfig
-	newins ${FILES_DIR}/XftConfig XftConfig.new
-	# This is if we are using Fontconfig only ...
-	#newins ${S}/lib/Xft1/XftConfig-OBSOLETE XftConfig
-	dosym ../../../../etc/X11/XftConfig /usr/X11R6/lib/X11/XftConfig
-
-	# Install example config file
-	newins ${S}/programs/Xserver/hw/xfree86/XF86Config XF86Config.example
-
-	# Install MS fonts.
-	if use truetype
-	then
-		ebegin "Installing MS Core Fonts"
-		dodir /usr/X11R6/lib/X11/fonts/truetype
-		cp -af ${WORKDIR}/truetype/*.ttf ${D}/usr/X11R6/lib/X11/fonts/truetype
-		eend 0
-	fi
-
-	# EURO support
-	ebegin "Euro Support..."
-	LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/lib" \
-	${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
-		gzip -9 > ${D}/usr/X11R6/lib/X11/fonts/misc/Xlat9-8x14-lat9.pcf.gz
-	LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/lib" \
-	${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
-		gzip -9 > ${D}/usr/X11R6/lib/X11/fonts/misc/Xlat9-9x16-lat9.pcf.gz
-	LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/lib" \
-	${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
-		gzip -9 > ${D}/usr/X11R6/lib/X11/fonts/misc/Xlat9-10x20-lat9.pcf.gz
-	eend 0
-
-	# Standard symlinks
-	dodir /usr/{bin,include,lib}
-	dosym ../X11R6/bin /usr/bin/X11
-	dosym ../X11R6/include/X11 /usr/include/X11
-	dosym ../X11R6/include/DPS /usr/include/DPS
-	dosym ../X11R6/include/GL /usr/include/GL
-	dosym ../X11R6/lib/X11 /usr/lib/X11
-	dosym ../../usr/X11R6/lib/X11/xkb /etc/X11/xkb
-
-	# Some critical directories
-	keepdir /var/lib/xdm
-	dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
-
-	# Remove invalid symlinks
-	rm -f ${D}/usr/lib/libGL.*
-	# Create required symlinks
-	dosym libGL.so.1.2 /usr/X11R6/lib/libGL.so
-	dosym libGL.so.1.2 /usr/X11R6/lib/libGL.so.1
-	dosym libGL.so.1.2 /usr/X11R6/lib/libMesaGL.so
-	# We move libGLU to /usr/lib now
-	dosym libGLU.so.1.3 /usr/lib/libMesaGLU.so
-
-	# .la files for libtool support
-	insinto /usr/X11R6/lib
-	doins ${FILES_DIR}/lib/*.la
-
-#	# Remove libz.a, as it causes problems (bug #4777)
-#	rm -f ${D}/usr/X11R6/lib/libz.a
-#	# And do not forget the includes (bug #9470)
-#	rm -f ${D}/usr/X11R6/include/{zconf.h,zlib.h}
-
-	# Use the server as the X binary now as the wrapper is gone.
-	dosym ../../usr/X11R6/bin/XFree86 /etc/X11/X
-
-	# Fix perms
-	fperms 755 /usr/X11R6/lib/X11/xkb/geometry/sgi
-	fperms 755 /usr/X11R6/bin/dga
-
-	# Hack from Mandrake (update ours that just created Compose files for
-	# all locales)
-	for x in $(find ${D}/usr/X11R6/lib/X11/locale/ -mindepth 1 -type d)
-	do
-		# make empty Compose files for some locales
-		# CJK must not have that file (otherwise XIM don't works some times)
-		case `basename ${x}` in
-			C|microsoft-*|iso8859-*|koi8-*)
-				if [ ! -f ${x}/Compose ]
-				then
-					touch ${x}/Compose
-				fi
-				;;
-			ja*|ko*|zh*)
-				if [ -r ${x}/Compose ]
-				then
-					rm -f ${x}/Compose
-				fi
-				;;
-		esac
-	done
-
-	# Another hack from Mandrake -- to fix dead + space for the us
-	# international keyboard
-	for i in ${D}/usr/X11R6/lib/X11/locale/*/Compose
-	do
-		sed -i \
-			-e 's/\(<dead_diaeresis> <space>\).*$/\1 : "\\"" quotedbl/' \
-			-e "s/\(<dead_acute> <space>\).*$/\1 : \"'\" apostrophe/" \
-			${i}
-	done
-
-	# Yet more Mandrake
-	ebegin "Encoding files for xfsft font server..."
-	dodir /usr/X11R6/lib/X11/fonts/encodings
-	cp -a ${WORKDIR}/usr/X11R6/lib/X11/fonts/encodings/* \
-		${D}/usr/X11R6/lib/X11/fonts/encodings
-
-	for x in ${D}/usr/X11R6/lib/X11/fonts/encodings/{.,large}/*.enc
-	do
-		[ -f "${x}" ] && gzip -9 -f ${x}
-	done
-	eend 0
-
-	if use nls
-	then
-		ebegin "gemini-koi8 fonts..."
-		cd ${WORKDIR}/ukr
-		gunzip *.Z
-		gzip -9 *.pcf
-		cd ${S}
-		cp -a ${WORKDIR}/ukr ${D}/usr/X11R6/lib/X11/fonts
-		eend 0
-	fi
-
-	exeinto /etc/X11
-	# new session management script
-	doexe ${FILES_DIR}/chooser.sh
-	# new display manager script
-	doexe ${FILES_DIR}/startDM.sh
-	exeinto /etc/X11/Sessions
-	for x in ${FILES_DIR}/Sessions/*
-	do
-		[ -f ${x} ] && doexe ${x}
-	done
-	insinto /etc/env.d
-	doins ${FILES_DIR}/10xfree
-	insinto /etc/X11/xinit
-	doins ${FILES_DIR}/xinitrc
-	exeinto /etc/X11/xdm
-	doexe ${FILES_DIR}/Xsession ${FILES_DIR}/Xsetup_0
-	insinto /etc/X11/fs
-	newins ${FILES_DIR}/xfs.config config
-	if use pam
-	then
-		insinto /etc/pam.d
-		newins ${FILES_DIR}/xdm.pamd xdm
-		# Need to fix console permissions first
-		newins ${FILES_DIR}/xserver.pamd xserver
-	fi
-	exeinto /etc/init.d
-	newexe ${FILES_DIR}/xdm.start xdm
-	newexe ${FILES_DIR}/xfs.start xfs
-	insinto /etc/conf.d
-	newins ${FILES_DIR}/xfs.conf.d xfs
-
-	# we want libGLU.so* in /usr/lib
-	mv ${D}/usr/X11R6/lib/libGLU.* ${D}/usr/lib
-
-	# next section is to setup the dynamic libGL stuff
-	ebegin "Moving libGL and friends for dynamic switching"
-	dodir /usr/lib/opengl/xfree/{lib,extensions,include}
-	local x=""
-	for x in ${D}/usr/X11R6/lib/libGL.so* \
-		${D}/usr/X11R6/lib/libGL.la \
-		${D}/usr/X11R6/lib/libGL.a \
-		${D}/usr/X11R6/lib/libMesaGL.so
-	do
-		if [ -f ${x} -o -L ${x} ]
-		then
-			# libGL.a cause problems with tuxracer, etc
-			mv -f ${x} ${D}/usr/lib/opengl/xfree/lib
-		fi
-	done
-	for x in ${D}/usr/X11R6/lib/modules/extensions/libglx*
-	do
-		if [ -f ${x} -o -L ${x} ]
-		then
-			mv -f ${x} ${D}/usr/lib/opengl/xfree/extensions
-		fi
-	done
-	for x in ${D}/usr/X11R6/include/GL/{gl.h,glx.h,glxtokens.h}
-	do
-		if [ -f ${x} -o -L ${x} ]
-		then
-			mv -f ${x} ${D}/usr/lib/opengl/xfree/include
-		fi
-	done
-	eend 0
-
-	# Make the core cursor the default.  People seem not to like whiteglass
-	# for some reason.
-	dosed 's:whiteglass:core:' /usr/share/cursors/xfree/default/index.theme
-
-	einfo "Striping binaries and libraries..."
-	# This bit I got from Redhat ... strip binaries and drivers ..
-	# NOTE:  We do NOT want to strip the drivers, modules or DRI modules!
-	for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
-	           grep -v ' shared object,' | \
-	           sed -n -e 's/^\(.*\):[  ]*ELF.*, not stripped/\1/p')
-	do
-	if [ -f ${x} ]
-		then
-			# Dont do the modules ...
-			if [ "${x/\/usr\/X11R6\/lib\/modules}" = "${x}" ]
-			then
-				echo "`echo ${x} | sed -e "s|${D}||"`"
-				strip ${x} || :
-			fi
-		fi
-	done
-	# Now do the libraries ...
-	for x in ${D}/usr/{lib,lib/opengl/xfree/lib}/*.so.* \
-		${D}/usr/X11R6/{lib,lib/X11/locale/lib/common}/*.so.*
-	do
-		if [ -f ${x} ]
-		then
-			echo "`echo ${x} | sed -e "s|${D}||"`"
-			strip --strip-debug ${x} || :
-		fi
-	done
-
-	# Install TaD's gentoo cursors
-	insinto /usr/share/cursors/xfree/gentoo/cursors
-	doins ${WORKDIR}/cursors/gentoo/cursors/*
-	insinto /usr/share/cursors/xfree/gentoo-blue/cursors
-	doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
-	insinto /usr/share/cursors/xfree/gentoo-silver/cursors
-	doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
-
-}
-
-pkg_preinst() {
-
-	# These changed from a directory/file to a symlink and reverse
-	if [ ! -L ${ROOT}/usr/X11R6/lib/X11/XftConfig ] && \
-	   [ -f ${ROOT}/usr/X11R6/lib/X11/XftConfig ]
-	then
-		rm -rf ${ROOT}/usr/X11R6/lib/X11/XftConfig
-	fi
-
-	if [ -L ${ROOT}/etc/X11/app-defaults ]
-	then
-		rm -f ${ROOT}/etc/X11/app-defaults
-	fi
-
-	if [ ! -L ${ROOT}/usr/X11R6/lib/X11/app-defaults ] && \
-	   [ -d ${ROOT}/usr/X11R6/lib/X11/app-defaults ]
-	then
-		if [ ! -d ${ROOT}/etc/X11/app-defaults ]
-		then
-			mkdir -p ${ROOT}/etc/X11/app-defaults
-		fi
-
-		mv -f ${ROOT}/usr/X11R6/lib/X11/app-defaults ${ROOT}/etc/X11
-	fi
-
-	if [ -L ${ROOT}/usr/X11R6/lib/X11/xkb ]
-	then
-		rm -f ${ROOT}/usr/X11R6/lib/X11/xkb
-	fi
-
-	if [ ! -L ${ROOT}/etc/X11/xkb ] && \
-	   [ -d ${ROOT}/etc/X11/xkb ]
-	then
-		if [ ! -d ${ROOT}/usr/X11R6/lib/X11/xkb ]
-		then
-			mkdir -p ${ROOT}/usr/X11R6/lib/X11
-		fi
-
-	    mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/X11R6/lib/X11
-	fi
-
-	# clean the dinamic libGL stuff's home to ensure
-	# we dont have stale libs floating around
-	if [ -d ${ROOT}/usr/lib/opengl/xfree ]
-	then
-		rm -rf ${ROOT}/usr/lib/opengl/xfree/*
-	fi
-
-	# clean out old fonts.* and encodings.dir files, as we
-	# will regenerate them
-	find ${ROOT}/usr/X11R6/lib/X11/fonts/ -type f -name 'fonts.*' \
-		-exec rm -f {} \;
-	find ${ROOT}/usr/X11R6/lib/X11/fonts/ -type f -name 'encodings.dir' \
-		-exec rm -f {} \;
-
-	# make sure we do not have any stale files lying round
-	# that could break things.
-	rm -f ${ROOT}/usr/X11R6/lib/libGL*
-}
-
-update_XftConfig() {
-
-	if [ "${ROOT}" = "/" ]
-	then
-		local CHECK1="f901d29ec6e3cbb0a5b0fd5cbdd9ff33"
-		local CHECK2="$(md5sum ${ROOT}/etc/X11/XftConfig | cut -d ' ' -f1)"
-
-		if [ "${CHECK1}" = "${CHECK2}" ]
-		then
-			echo
-			ewarn "Due to an invalid /etc/X11/XftConfig from x11-base/xfree-4.2.1,"
-			ewarn "/etc/X11/XftConfig is being updated automatically.  Your old"
-			ewarn "version of /etc/X11/XftConfig will be backed up as:"
-			ewarn
-			ewarn "  ${ROOT}etc/X11/XftConfig.bak"
-			echo
-
-			cp -a ${ROOT}/etc/X11/XftConfig \
-				${ROOT}/etc/X11/XftConfig.bak
-			mv -f ${ROOT}/etc/X11/XftConfig.new \
-				${ROOT}/etc/X11/XftConfig
-			rm -f ${ROOT}/etc/X11/._cfg????_XftConfig
-		else
-			rm -f ${ROOT}/etc/X11/XftConfig.new
-		fi
-	fi
-}
-
-
-pkg_postinst() {
-
-	env-update
-
-	if [ "${ROOT}" = "/" ]
-	then
-		local x=""
-
-		umask 022
-
-		# This one cause ttmkfdir to segfault :/
-		#rm -f ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/large/gbk-0.enc.gz
-
-		# ********************************************************************
-		#  A note about fonts and needed files:
-		#
-		#  1)  Create /usr/X11R6/lib/X11/fonts/encodings/encodings.dir
-		#
-		#  2)  Create font.scale for TrueType fonts (need to do this before
-		#      we create fonts.dir files, else fonts.dir files will be
-		#      invalid for TrueType fonts...)
-		#
-		#  3)  Now Generate fonts.dir files.
-		#
-		#  CID fonts is a bit more involved, but as we do not install any,
-		#  thus I am not going to bother.
-		#
-		#  <azarah@gentoo.org> (20 Oct 2002)
-		#
-		# ********************************************************************
-
-		ebegin "Generating encodings.dir..."
-		# Create the encodings.dir in /usr/X11R6/lib/X11/fonts/encodings
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-		${ROOT}/usr/X11R6/bin/mkfontdir -n \
-			-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings \
-			-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/large \
-			-- ${ROOT}/usr/X11R6/lib/X11/fonts/encodings
-		eend 0
-
-		if [ -x ${ROOT}/usr/X11R6/bin/ttmkfdir ]
-		then
-			ebegin "Creating fonts.scale files..."
-			for x in $(find ${ROOT}/usr/X11R6/lib/X11/fonts/* -type d -maxdepth 1)
-			do
-				[ -z "$(ls ${x}/)" ] && continue
-				[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-				# Only generate .scale files if there are truetype
-				# fonts present ...
-				if [ "${x/encodings}" = "${x}" -a \
-				     -n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]
-				then
-					LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-					${ROOT}/usr/X11R6/bin/ttmkfdir -x 2 \
-						-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/encodings.dir \
-						-o ${x}/fonts.scale -d ${x}
-				fi
-			done
-			eend 0
-		fi
-
-		ebegin "Generating fonts.dir files..."
-		for x in $(find ${ROOT}/usr/X11R6/lib/X11/fonts/* -type d -maxdepth 1)
-		do
-			[ -z "$(ls ${x}/)" ] && continue
-			[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-			if [ "${x/encodings}" = "${x}" ]
-			then
-				LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-				${ROOT}/usr/X11R6/bin/mkfontdir \
-					-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings \
-					-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/large \
-					-- ${x}
-			fi
-		done
-		eend 0
-
-		ebegin "Generating Xft Cache..."
-		for x in $(find ${ROOT}/usr/X11R6/lib/X11/fonts/* -type d -maxdepth 1)
-		do
-			[ -z "$(ls ${x}/)" ] && continue
-			[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-			# Only generate XftCache files if there are truetype
-			# fonts present ...
-			if [ "${x/encodings}" = "${x}" -a \
-			     -n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]
-			then
-				LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-				${ROOT}/usr/X11R6/bin/xftcache ${x} &> /dev/null
-			fi
-		done
-		eend 0
-
-		ebegin "Fixing permissions..."
-		find ${ROOT}/usr/X11R6/lib/X11/fonts/ -type f -name 'font.*' \
-			-exec chmod 0644 {} \;
-		eend 0
-
-		# danarmak found out that fc-cache should be run AFTER all the above
-		# stuff, as otherwise the cache is invalid, and has to be run again
-		# as root anyway
-		if [ -x ${ROOT}/usr/bin/fc-cache ]
-		then
-			ebegin "Creating FC font cache..."
-			HOME="/root" ${ROOT}/usr/bin/fc-cache -f
-			eend 0
-		fi
-
-		# Switch to the xfree implementation.
-		# Use new opengl-update that will not reset user selected
-		# OpenGL interface ...
-		echo; ${ROOT}/usr/sbin/opengl-update --use-old xfree
-	fi
-
-	for x in $(find ${ROOT}/usr/X11R6/lib/X11/locale/ -mindepth 1 -type d)
-	do
-		# Remove old compose files we might have created incorrectly
-		# CJK must not have that file (otherwise XIM don't works some times)
-		case `basename ${x}` in
-			ja*|ko*|zh*)
-				if [ -r "${x}/Compose" ]
-				then
-					rm -f ${x}/Compose
-				fi
-				;;
-		esac
-	done
-
-	# Update /etc/X11/XftConfig if its the one from Xft1.2, as its
-	# invalid for Xft1.1 ....
-	# NOTE:  This should not be needed for xfree-4.2.99 or later,
-	#        but lets not take chances with people that may downgrade
-	#        at a later stage ....
-	update_XftConfig
-
-	# These need to be owned by root and the correct permissions
-	# (bug #8281)
-	for x in ${ROOT}/tmp/.{ICE,X11}-unix
-	do
-		if [ ! -d ${x} ]
-		then
-			mkdir -p ${x}
-		fi
-
-		chown root:root ${x}
-		chmod 1777 ${x}
-	done
-
-	if use 3dfx
-	then
-		echo
-		einfo "If using a 3DFX card, and you had \"3dfx\" in your USE flags,"
-		einfo "please merge media-libs/glide-v3 if you have not done so yet"
-		einfo "by doing:"
-		einfo
-		einfo "  # emerge media-libs/glide-v3"
-		echo
-	fi
-	echo
-	ewarn "BEWARE 1:"
-	ewarn "This version of XFree won't work with ati-drivers-2.5.1-r1"
-	ewarn "if you are using them please unmerge ati-drivers"
-	ewarn " and emerge xfree-drm"
-	echo
-	ewarn "BEWARE 2:"
-	ewarn "If you experience font corruption on OpenOffice.org or similar"
-	ewarn "glitches please remake your XF86Config"
-	echo
-
-	einfo "Please note that the xcursors are in /usr/share/cursors/xfree"
-	einfo "Any custom cursor sets should be placed in that directory"
-	einfo "This is different from the previous versions of 4.3 and"
-	einfo "the 4.2.99 series."
-	echo
-	ewarn "New in this release: if you wish to set system-wide default"
-	ewarn "cursors, please set them in /usr/local/share/cursors/xfree"
-	ewarn "so that future emerges will not overwrite those settings"
-	echo
-	einfo "Listening on ipv4 is disabled by default with startx."
-	einfo "To enable it or disable ipv6, edit /usr/X11R6/bin/startx."
-}
-
-pkg_postrm() {
-
-	# Fix problematic links
-	if [ -x ${ROOT}/usr/X11R6/bin/XFree86 ]
-	then
-		ln -snf ../X11R6/bin ${ROOT}/usr/bin/X11
-		ln -snf ../X11R6/include/X11 ${ROOT}/usr/include/X11
-		ln -snf ../X11R6/include/DPS ${ROOT}/usr/include/DPS
-		ln -snf ../X11R6/include/GL ${ROOT}/usr/include/GL
-		ln -snf ../X11R6/lib/X11 ${ROOT}/usr/lib/X11
-	fi
-}
diff --git a/x11-base/xfree/xfree-4.3.99.901.ebuild b/x11-base/xfree/xfree-4.3.99.901.ebuild
deleted file mode 100644
index ceca9f692e6a..000000000000
--- a/x11-base/xfree/xfree-4.3.99.901.ebuild
+++ /dev/null
@@ -1,1099 +0,0 @@
-# Copyright 1999-2004 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xfree/xfree-4.3.99.901.ebuild,v 1.9 2004/02/06 23:36:06 cyfred Exp $
-
-# Make sure Portage does _NOT_ strip symbols.  We will do it later and make sure
-# that only we only strip stuff that are safe to strip ...
-RESTRICT="nostrip"
-
-# IUSE="sse mmx 3dnow" are disabled in favor of autodetection
-# IUSE="gatos" disabled because gatos is broken on ~4.4 now (31 Jan 2004)
-IUSE="3dfx xml2 truetype nls cjk doc ipv6 debug static pam sdk"
-# INPUT_DEVICES="synaptics"
-
-filter-flags "-funroll-loops"
-
-ALLOWED_FLAGS="-fstack-protector -march -mcpu -O -O1 -O2 -O3 -pipe -fomit-frame-pointer"
-
-# Recently there has been a lot of stability problem in Gentoo-land.  Many
-# things can be the cause to this, but I believe that it is due to gcc3
-# still having issues with optimizations, or with it not filtering bad
-# combinations (protecting the user maybe from themselves) yet.
-#
-# This can clearly be seen in large builds like glibc, where too aggressive
-# CFLAGS cause the tests to fail miserbly.
-#
-# Quote from Nick Jones <carpaski@gentoo.org>, who in my opinion
-# knows what he is talking about:
-#
-#   People really shouldn't force code-specific options on... It's a
-#   bad idea. The -march options aren't just to look pretty. They enable
-#   options that are sensible (and include sse,mmx,3dnow when apropriate).
-#
-# The next command strips CFLAGS and CXXFLAGS from nearly all flags.  If
-# you do not like it, comment it, but do not bugreport if you run into
-# problems.
-#
-# <azarah@gentoo.org> (13 Oct 2002)
-strip-flags
-
-# Are we using a snapshot ?
-USE_SNAPSHOT="yes"
-
-FILES_VER="0.1"
-PATCH_VER="0.1"
-FT2_VER="2.1.4"
-XCUR_VER="0.3.1"
-SISDRV_VER="021203-1"
-SAVDRV_VER="1.1.27t"
-MGADRV_VER="1_3_0beta"
-#VIADRV_VER="0.1"
-
-BASE_PV="${PV}"
-MY_SV="XFree86-${BASE_PV}"
-
-S="${WORKDIR}/xc"
-FILES_DIR="${WORKDIR}/files"
-PATCH_DIR="${WORKDIR}/patch"
-
-SRC_PATH0="ftp://ftp.xfree86.org/pub/XFree86/develsnaps"
-
-HOMEPAGE="http://www.xfree.org"
-
-# Misc patches we may need to fetch ..
-X_PATCHES="http://dev.gentoo.org/~spyderous/xfree/patchsets/${PV}/XFree86-${PV}-patches-${PATCH_VER}.tar.bz2"
-
-X_DRIVERS="http://people.mandrakesoft.com/~flepied/projects/wacom/xf86Wacom.c.gz
-	http://www.probo.com/timr/savage-${SAVDRV_VER}.zip"
-#	http://www.winischhofer.net/sis/sis_drv_src_${SISDRV_VER}.tar.gz"
-#	mirror://gentoo/XFree86-${PV}-drivers-via-${VIADRV_VER}.tar.bz2
-# Updated Wacom driver:  http://people.mandrakesoft.com/~flepied/projects/wacom/
-# Latest Savage drivers:  http://www.probo.com/timr/savage40.html
-# Latest SIS drivers:  http://www.winischhofer.net/
-
-# For the MS Core fonts ..
-MS_COREFONTS="./andale32.exe ./arial32.exe
-	./arialb32.exe ./comic32.exe
-	./courie32.exe ./georgi32.exe
-	./impact32.exe ./times32.exe
-	./trebuc32.exe ./verdan32.exe
-	./webdin32.exe"
-#	./IELPKTH.CAB"
-# Need windows license to use this one
-MS_FONT_URLS="${MS_COREFONTS//\.\//mirror://sourceforge/corefonts/}"
-
-GENTOO_FILES="http://dev.gentoo.org/~spyderous/xfree/patchsets/${PV}/XFree86-${PV}-files-${FILES_VER}.tar.bz2"
-
-SRC_URI="${SRC_PATH0}/${MY_SV}.tar.bz2
-	mirror://gentoo/eurofonts-X11.tar.bz2
-	mirror://gentoo/xfsft-encodings.tar.bz2
-	mirror://gentoo/gentoo-cursors-tad-${XCUR_VER}.tar.bz2
-	truetype? ( ${MS_FONT_URLS} )
-	nls? ( mirror://gentoo/gemini-koi8-u.tar.bz2 )
-	${GENTOO_FILES}
-	${X_DRIVERS}
-	${X_PATCHES}"
-
-LICENSE="X11 MSttfEULA"
-SLOT="0"
-KEYWORDS="~x86 ~ppc"
-
-# sys-apps/portage for USE_EXPAND
-DEPEND=">=sys-apps/baselayout-1.8.3
-	>=sys-libs/ncurses-5.1
-	>=sys-libs/zlib-1.1.3-r2
-	>=sys-devel/flex-2.5.4a-r5
-	>=dev-libs/expat-1.95.3
-	>=media-libs/freetype-${FT2_VER}
-	>=media-libs/fontconfig-2.1-r1
-	>=x11-base/opengl-update-1.4
-	>=x11-misc/ttmkfdir-3.0.4
-	>=sys-apps/sed-4
-	dev-lang/perl
-	media-libs/libpng
-	app-arch/unzip
-	pam? ( >=sys-libs/pam-0.75 )
-	truetype? ( app-arch/cabextract )
-	>=sys-apps/portage-2.0.49-r13
-	!x11-libs/xft"
-# RDEPEND="${DEPEND}"
-# unzip - needed for savage driver (version 1.1.27t)
-# x11-libs/xft -- blocked because of interference with xfree's
-
-PDEPEND="x86? (
-			3dfx? ( >=media-libs/glide-v3-3.10 )
-			input_devices_synaptics? ( x11-misc/synaptics )
-		)"
-
-PROVIDE="virtual/x11
-	virtual/opengl
-	virtual/glu
-	virtual/xft"
-
-#inherit needs to happen *after* DEPEND has been defined to have "newdepend"
-#do the right thing. Otherwise RDEPEND doesn't get set properly.
-inherit eutils flag-o-matic gcc xfree
-
-DESCRIPTION="Xfree86: famous and free X server"
-
-src_unpack() {
-
-	# Unpack source and patches
-	ebegin "Unpacking source"
-		unpack ${MY_SV}.tar.bz2 > /dev/null
-	eend 0
-
-	ebegin "Unpacking Gentoo files and patches"
-		unpack XFree86-${PV}-files-${FILES_VER}.tar.bz2 > /dev/null
-		unpack XFree86-${PV}-patches-${PATCH_VER}.tar.bz2 > /dev/null
-	eend 0
-
-	# Unpack TaD's gentoo cursors
-	ebegin "Unpacking Gentoo cursors"
-		unpack gentoo-cursors-tad-${XCUR_VER}.tar.bz2 > /dev/null
-	eend 0
-
-	# Unpack extra fonts stuff from Mandrake
-	ebegin "Unpacking fonts"
-		if use nls
-		then
-			unpack gemini-koi8-u.tar.bz2 > /dev/null
-		fi
-		unpack eurofonts-X11.tar.bz2 > /dev/null
-		unpack xfsft-encodings.tar.bz2 > /dev/null
-	eend 0
-
-	# Remove bum encoding
-	rm -f ${WORKDIR}/usr/X11R6/lib/X11/fonts/encodings/urdunaqsh-0.enc
-
-	# Update the Savage Driver
-	# savage driver 1.1.27t is a .zip and contains a savage directory
-	# (that's why we have to be in drivers, not in savage subdir).
-	# Could be USE flag based
-
-	ebegin "Updating Savage driver"
-		cd ${S}/programs/Xserver/hw/xfree86/drivers
-		unpack savage-${SAVDRV_VER}.zip > /dev/null
-		ln -s ${S}/programs/Xserver/hw/xfree86/vbe/vbe.h \
-			${S}/programs/Xserver/hw/xfree86/drivers/savage
-		cd ${S}
-	eend 0
-
-#	ebegin "Updating SiS driver"
-#	cd ${S}/programs/Xserver/hw/xfree86/drivers/sis
-#	unpack sis_drv_src_${SISDRV_VER}.tar.gz > /dev/null
-#	ln -s ${S}/programs/Xserver/hw/xfree86/vbe/vbe.h \
-#		${S}/programs/Xserver/hw/xfree86/drivers/sis
-#	cd ${S}
-#	eend 0
-
-	# This patch is just plain broken. Results in random failures.
-	mv -f ${PATCH_DIR}/0120*parallel-make* ${PATCH_DIR}/excluded
-
-	# Hardened patches (both broken)
-	mv -f ${PATCH_DIR}/9960_all_4.3.0-exec-shield-GNU* ${PATCH_DIR}/excluded
-	mv -f ${PATCH_DIR}/9961_all_4.3.0-libGL-exec-shield* ${PATCH_DIR}/excluded
-
-	# We dont have an implementation for S/390's yet...
-	if [ ! "${ARCH}" = "s390" ]
-	then
-		mv -f ${PATCH_DIR}/7500* ${PATCH_DIR}/excluded
-	fi
-
-#
-#	if [ ! "`use gatos`" ]
-#	then
-		mv -f ${PATCH_DIR}/9841_all_4.3.0-gatos-mesa* ${PATCH_DIR}/excluded
-#	fi
-
-	if use debug
-	then
-		mv -f ${PATCH_DIR}/5901*acecad-debug* ${PATCH_DIR}/excluded
-	fi
-
-	# TDFX_RISKY - 16-bit, 1024x768 or higher on low-memory voodoo3's
-	if [ "`use 3dfx`" -a "${TDFX_RISKY}" = "yes" ]
-	then
-		mv -f ${PATCH_DIR}/5850* ${PATCH_DIR}/excluded
-	else
-		mv -f ${PATCH_DIR}/5851* ${PATCH_DIR}/excluded
-	fi
-
-	# Bulk patching - based on patch name
-	# Will create excluded stuff once it's needed
-	cd ${WORKDIR}
-	EPATCH_SUFFIX="patch" \
-	epatch ${PATCH_DIR}
-	cd ${S}
-
-	# Update Wacom Driver, hopefully resolving bug #1632
-	# The kernel driver should prob also be updated, this can be
-	# found at:
-	#
-	#  http://people.mandrakesoft.com/~flepied/projects/wacom/
-	#
-	if ( [ -e "/usr/src/linux" ] && \
-		[ ! `is_kernel "2" "2"` ] ) || \
-		[ "`uname -r | cut -d. -f1,2`" != "2.2" ]
-	then
-		ebegin "Updating Wacom USB Driver"
-		gzip -dc ${DISTDIR}/xf86Wacom.c.gz > \
-			${S}/programs/Xserver/hw/xfree86/input/wacom/xf86Wacom.c || die
-		eend 0
-	fi
-
-	# Unpack the MS fonts
-	if use truetype
-	then
-		einfo "Unpacking MS Core Fonts..."
-		mkdir -p ${WORKDIR}/truetype; cd ${WORKDIR}/truetype
-		for x in ${MS_COREFONTS}
-		do
-			if [ -f ${DISTDIR}/${x} ]
-			then
-				einfo "  ${x/\.\/}..."
-				cabextract --lowercase ${DISTDIR}/${x} > /dev/null || die
-			fi
-		done
-		ebegin "Done unpacking Core Fonts"; eend 0
-	fi
-
-	ebegin "Setting up config/cf/host.def"
-		cd ${S}; cp ${FILES_DIR}/site.def config/cf/host.def || die
-		echo "#define XVendorString \"Gentoo Linux (XFree86 ${PV}, revision ${PR})\"" \
-			>> config/cf/host.def
-
-		# Xwrapper has been removed so we now need to use the set uid server
-		# again, this mustve happened somewhere after 4.3.0 in the development.
-		echo "#define InstallXserverSetUID YES" >> config/cf/host.def
-		echo "#define BuildServersOnly NO" >> config/cf/host.def
-
-		# Bug #12775 .. fails with -Os.
-		replace-flags "-Os" "-O2"
-
-		if [ "`gcc-version`" != "2.95" ]
-		then
-			# Should fix bug #4189.  gcc 3.x have problems with -march=pentium4
-			# and -march=athlon-tbird
-
-			if [ "`gcc-version`" != "3.3" ]
-			then
-				replace-flags "-march=pentium4" "-march=pentium3"
-				replace-flags "-march=athlon-tbird" "-march=athlon"
-			fi
-
-			# Without this, modules breaks with gcc3
-			if [ "`gcc-version`" = "3.1" ]
-			then
-				append-flags "-fno-merge-constants"
-				append-flags "-fno-merge-constants"
-			fi
-		fi
-
-		if ( [ -e "/usr/src/linux" ] && \
-			[ ! `is_kernel "2" "2"` ] ) || \
-			[ "`uname -r | cut -d. -f1,2`" != "2.2" ]
-		then
-			echo "#define HasLinuxInput YES" >> config/cf/host.def
-		fi
-
-		echo "#define CcCmd ${CC}" >> config/cf/host.def
-		echo "#define OptimizedCDebugFlags ${CFLAGS}" >> config/cf/host.def
-		echo "#define OptimizedCplusplusDebugFlags ${CXXFLAGS}" >> config/cf/host.def
-
-		if [ -n "`use debug`" -o -n "`use static`" ]
-		then
-			echo "#define DoLoadableServer	NO" >>config/cf/host.def
-		fi
-
-		if use debug
-		then
-			echo "#define XFree86Devel	YES" >> config/cf/host.def
-		else
-			echo "#define ExtraXInputDrivers acecad" >> config/cf/host.def
-
-			# use less ram .. got this from Spider's makeedit.eclass :)
-			echo "#define GccWarningOptions -Wno-return-type -w" \
-				>> config/cf/host.def
-		fi
-
-		if use pam
-		then
-			# If you want to have optional pam support, do it properly ...
-			echo "#define HasPam YES" >> config/cf/host.def
-			echo "#define HasPamMisc YES" >> config/cf/host.def
-		else
-			echo "#define HasPam NO" >> config/cf/host.def
-			echo "#define HasPamMisc NO" >> config/cf/host.def
-		fi
-
-		if use nls
-		then
-			echo "#define XtermWithI18N YES" >> config/cf/host.def
-		fi
-
-		if [ "${ARCH}" = "x86" ] && false # I think we should let X decide this ..
-		then
-			# optimize Mesa for architecture
-			if use mmx
-			then
-				echo "#define HasMMXSupport	YES" >> config/cf/host.def
-				echo "#define MesaUseMMX YES" >> config/cf/host.def
-			else
-				echo "#define HasMMXSupport	NO" >> config/cf/host.def
-				echo "#define MesaUseMMX NO" >> config/cf/host.def
-			fi
-			if use mmx && use 3dnow
-			then
-				echo "#define Has3DNowSupport YES" >> config/cf/host.def
-				echo "#define MesaUse3DNow YES" >> config/cf/host.def
-			else
-				echo "#define Has3DNowSupport NO" >> config/cf/host.def
-				echo "#define MesaUse3DNow NO" >> config/cf/host.def
-			fi
-			if use mmx && use sse
-			then
-				echo "#define HasKatmaiSupport YES" >> config/cf/host.def
-				echo "#define MesaUseKatmai YES" >> config/cf/host.def
-			else
-				echo "#define HasKatmaiSupport NO" >> config/cf/host.def
-				echo "#define MesaUseKatmai NO" >> config/cf/host.def
-			fi
-		fi
-
-		if [ "${ARCH}" = "x86" ]
-		then
-			# build with glide3 support? (build the tdfx_dri.o module)
-			if use 3dfx
-			then
-				echo "#define HasGlide3 YES" >> config/cf/host.def
-			fi
-		fi
-
-		if [ "${ARCH}" = "hppa" ]
-		then
-			echo "#define DoLoadableServer NO" >> config/cf/host.def
-		fi
-
-		if [ "${ARCH}" = "alpha" ]
-		then
-			echo "#define XF86CardDrivers mga nv tga s3virge sis rendition \
-				i740 tdfx cirrus tseng fbdev \
-				ati vga v4l glint" >> config/cf/host.def
-		fi
-
-		if [ "${ARCH}" = "ppc" ]
-		then
-			echo "#define XF86CardDrivers mga glint s3virge sis savage trident \
-				chips tdfx fbdev ati DevelDrivers vga nv imstt \
-				XF86OSCardDrivers XF86ExtraCardDrivers" >> config/cf/host.def
-		fi
-
-		if [ "${ARCH}" = "sparc" ]
-		then
-			echo "#define XF86CardDrivers sunffb sunleo suncg6 suncg3 suncg14 \
-			suntcx sunbw2 glint mga tdfx ati savage vesa vga fbdev \
-			XF86OSCardDrivers XF86ExtraCardDrivers \
-			DevelDrivers" >> config/cf/host.def
-		fi
-
-		if use xml2
-		then
-			echo "#define HasLibxml2 YES" >> config/cf/host.def
-		fi
-
-		# The definitions for fontconfig
-		echo "#define UseFontconfig YES" >> config/cf/host.def
-		echo "#define HasFontconfig YES" >> config/cf/host.def
-
-		# Use the xfree Xft2 lib
-		echo "#define SharedLibXft YES" >> config/cf/host.def
-
-		# Set up docs building
-		if use doc
-		then
-			local DOC="YES"
-		else
-			local DOC="NO"
-		fi
-
-		# with USE="X doc' circular dep w/ virtual/ghostscript
-		# echo "#define HasGhostScript ${DOC}" >> config/cf/host.def
-		echo "#define BuildLinuxDocText ${DOC}" >> config/cf/host.def
-		echo "#define BuildLinuxDocHtml ${DOC}" >> config/cf/host.def
-		echo "#define BuildLinuxDocPS ${DOC}" >> config/cf/host.def
-		echo "#define BuildSpecsDocs ${DOC}" >> config/cf/host.def
-		echo "#define BuildHtmlManPages ${DOC}" >> config/cf/host.def
-
-		# enable Japanese docs, optionally
-		if use cjk
-		then
-			echo "#define InstallJapaneseDocs ${DOC}" >> config/cf/host.def
-		fi
-
-		# Native Language Support Fonts
-		if [ -z "`use nls`" ]
-		then
-			echo "#define BuildCyrillicFonts NO" >> config/cf/host.def
-			echo "#define BuildArabicFonts NO" >> config/cf/host.def
-			echo "#define BuildGreekFonts NO" >> config/cf/host.def
-			echo "#define BuildHebrewFonts NO" >> config/cf/host.def
-			echo "#define BuildThaiFonts NO" >> config/cf/host.def
-
-			if [ -z "`use cjk`" ]
-			then
-				echo "#define BuildCIDFonts NO" >> config/cf/host.def
-				echo "#define BuildJapaneseFonts NO" >> config/cf/host.def
-				echo "#define BuildKoreanFonts NO" >> config/cf/host.def
-				echo "#define BuildChineseFonts NO" >> config/cf/host.def
-			fi
-		fi
-
-		if use ipv6
-		then
-			echo "#define BuildIPv6 YES" >> config/cf/host.def
-		else
-			echo "#define BuildIPv6 NO" >> config/cf/host.def
-		fi
-
-		# Will uncomment this after kde, qt, and *box ebuilds are alterered to use
-		# it
-		#	if use xinerama
-		#	then
-		#		echo "#define BuildXinerama YES" >> config/cf/host.def
-		#		echo "#define BuildXineramaLibrary YES" >> config/cf/host.def
-		#	fi
-
-	# End the host.def definitions here
-	eend 0
-
-	cd ${S}
-	if use doc
-	then
-		# These are not included anymore as they are obsolete
-		rm -rf ${S}/doc/hardcopy/{XIE,PEX5}
-		for x in ${S}/programs/Xserver/hw/xfree86/{XF98Conf.cpp,XF98Config}
-		do
-			if [ -f ${x} ]
-			then
-				cp ${x} ${x}.orig
-				grep -iv 'Load[[:space:]]*"\(pex5\|xie\)"' ${x}.orig > ${x}
-				rm -f ${x}.orig
-			fi
-		done
-	fi
-
-}
-
-src_compile() {
-
-	# Set MAKEOPTS to have proper -j? option ..
-	get_number_of_jobs
-
-	# If a user defines the MAKE_OPTS variable in /etc/make.conf instead of
-	# MAKEOPTS, they'll redefine an internal XFree86 Makefile variable and the
-	# xfree build will silently die. This is tricky to track down, so I'm
-	# adding a preemptive fix for this issue by making sure that MAKE_OPTS is
-	# unset. (drobbins, 08 Mar 2003)
-	unset MAKE_OPTS
-
-	einfo "Building XFree86..."
-	FAST=1 emake World WORLDOPTS=""  || die
-
-	if use nls
-	then
-		cd ${S}/nls
-		make || die
-		cd ${S}
-	fi
-
-}
-
-src_install() {
-
-	unset MAKE_OPTS
-
-	einfo "Installing XFree86..."
-	# gcc3 related fix.  Do this during install, so that our
-	# whole build will not be compiled without mmx instructions.
-	if [ "`gcc-version`" != "2.95" ] && [ "${ARCH}" = "x86" ]
-	then
-		make install DESTDIR=${D} || \
-		make CDEBUGFLAGS="${CDEBUGFLAGS} -mno-mmx" \
-			CXXDEBUGFLAGS="${CXXDEBUGFLAGS} -mno-mmx" \
-			install DESTDIR=${D} || die
-	else
-		make install DESTDIR=${D} || die
-	fi
-
-	if use sdk # || use gatos
-	then
-		einfo "Installing XFree86 SDK..."
-		make install.sdk DESTDIR=${D} || die
-	fi
-
-	# This one needs to be in /usr/lib
-	insinto /usr/lib/pkgconfig
-	doins ${D}/usr/X11R6/lib/pkgconfig/{xcursor,xft}.pc
-	# Now remove the invalid xft.pc, and co ...
-	rm -rf ${D}/usr/X11R6/lib/pkgconfig
-
-	einfo "Installing man pages..."
-	make install.man DESTDIR=${D} || die
-	einfo "Compressing man pages..."
-	prepman /usr/X11R6
-
-	if use nls
-	then
-		cd ${S}/nls
-		make DESTDIR=${D} install || die
-	fi
-
-	# Make sure the user running xterm can only write to utmp.
-	fowners root:utmp /usr/X11R6/bin/xterm
-	fperms 2755 /usr/X11R6/bin/xterm
-
-	# Fix permissions on locale/common/*.so
-	for x in ${D}/usr/X11R6/lib/X11/locale/lib/common/*.so*
-	do
-		if [ -f ${x} ]
-		then
-			fperms 0755 `echo ${x} | sed -e "s|${D}||"`
-		fi
-	done
-
-	# Fix permissions on modules ...
-	for x in $(find ${D}/usr/X11R6/lib/modules -name '*.o') \
-	         $(find ${D}/usr/X11R6/lib/modules -name '*.so')
-	do
-		if [ -f ${x} ]
-		then
-			fperms 0755 `echo ${x} | sed -e "s|${D}||"`
-		fi
-	done
-
-	# We zap our CFLAGS in the host.def file, as hardcoded CFLAGS can
-	# mess up other things that use xmkmf
-	ebegin "Fixing lib/X11/config/host.def"
-		cp ${D}/usr/X11R6/lib/X11/config/host.def ${T}
-		awk '!/OptimizedCDebugFlags|OptimizedCplusplusDebugFlags|GccWarningOptions/ {print $0}' \
-			${T}/host.def > ${D}/usr/X11R6/lib/X11/config/host.def
-		# theoretically, /usr/X11R6/lib/X11/config is a possible candidate for
-		# config file management. If we find that people really worry about imake
-		# stuff, we may add it.  But for now, we leave the dir unprotected.
-	eend 0
-
-	insinto /etc/X11
-	# We still use freetype for now ...
-	doins ${FILES_DIR}/XftConfig
-	newins ${FILES_DIR}/XftConfig XftConfig.new
-	# This is if we are using Fontconfig only ...
-	#newins ${S}/lib/Xft1/XftConfig-OBSOLETE XftConfig
-	dosym ../../../../etc/X11/XftConfig /usr/X11R6/lib/X11/XftConfig
-
-	# Install example config file
-	newins ${S}/programs/Xserver/hw/xfree86/XF86Config XF86Config.example
-
-	# Install MS fonts.
-	if use truetype
-	then
-		ebegin "Installing MS Core Fonts"
-			dodir /usr/X11R6/lib/X11/fonts/truetype
-			cp -af ${WORKDIR}/truetype/*.ttf ${D}/usr/X11R6/lib/X11/fonts/truetype
-		eend 0
-	fi
-
-	# EURO support
-	ebegin "Euro Support..."
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/lib" \
-		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-8x14.bdf | \
-			gzip -9 > ${D}/usr/X11R6/lib/X11/fonts/misc/Xlat9-8x14-lat9.pcf.gz
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/lib" \
-		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-9x16.bdf | \
-			gzip -9 > ${D}/usr/X11R6/lib/X11/fonts/misc/Xlat9-9x16-lat9.pcf.gz
-		LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${D}/usr/X11R6/lib" \
-		${D}/usr/X11R6/bin/bdftopcf -t ${WORKDIR}/Xlat9-10x20.bdf | \
-			gzip -9 > ${D}/usr/X11R6/lib/X11/fonts/misc/Xlat9-10x20-lat9.pcf.gz
-	eend 0
-
-	# Standard symlinks
-	dodir /usr/{bin,include,lib}
-	dosym ../X11R6/bin /usr/bin/X11
-	dosym ../X11R6/include/X11 /usr/include/X11
-	dosym ../X11R6/include/DPS /usr/include/DPS
-	dosym ../X11R6/include/GL /usr/include/GL
-	dosym ../X11R6/lib/X11 /usr/lib/X11
-	dosym ../../usr/X11R6/lib/X11/xkb /etc/X11/xkb
-
-	# Some critical directories
-	keepdir /var/lib/xdm
-	dosym ../../../var/lib/xdm /etc/X11/xdm/authdir
-
-	# Remove invalid symlinks
-	rm -f ${D}/usr/lib/libGL.*
-	# Create required symlinks
-	dosym libGL.so.1.2 /usr/X11R6/lib/libGL.so
-	dosym libGL.so.1.2 /usr/X11R6/lib/libGL.so.1
-	dosym libGL.so.1.2 /usr/X11R6/lib/libMesaGL.so
-	# We move libGLU to /usr/lib now
-	dosym libGLU.so.1.3 /usr/lib/libMesaGLU.so
-
-	# .la files for libtool support
-	insinto /usr/X11R6/lib
-	doins ${FILES_DIR}/lib/*.la
-
-	# Use the server as the X binary now as the wrapper is gone.
-	dosym ../../usr/X11R6/bin/XFree86 /etc/X11/X
-
-	# Fix perms
-	fperms 755 /usr/X11R6/lib/X11/xkb/geometry/sgi
-	fperms 755 /usr/X11R6/bin/dga
-
-	# Hack from Mandrake (update ours that just created Compose files for
-	# all locales)
-	for x in $(find ${D}/usr/X11R6/lib/X11/locale/ -mindepth 1 -type d)
-	do
-		# make empty Compose files for some locales
-		# CJK must not have that file (otherwise XIM don't works some times)
-		case `basename ${x}` in
-			C|microsoft-*|iso8859-*|koi8-*)
-				if [ ! -f ${x}/Compose ]
-				then
-					touch ${x}/Compose
-				fi
-				;;
-			ja*|ko*|zh*)
-				if [ -r ${x}/Compose ]
-				then
-					rm -f ${x}/Compose
-				fi
-				;;
-		esac
-	done
-
-	# Another hack from Mandrake -- to fix dead + space for the us
-	# international keyboard
-	for i in ${D}/usr/X11R6/lib/X11/locale/*/Compose
-	do
-		sed -i \
-			-e 's/\(<dead_diaeresis> <space>\).*$/\1 : "\\"" quotedbl/' \
-			-e "s/\(<dead_acute> <space>\).*$/\1 : \"'\" apostrophe/" \
-			${i}
-	done
-
-	# Yet more Mandrake
-	ebegin "Encoding files for xfsft font server..."
-		dodir /usr/X11R6/lib/X11/fonts/encodings
-		cp -a ${WORKDIR}/usr/X11R6/lib/X11/fonts/encodings/* \
-			${D}/usr/X11R6/lib/X11/fonts/encodings
-
-		for x in ${D}/usr/X11R6/lib/X11/fonts/encodings/{.,large}/*.enc
-		do
-			[ -f "${x}" ] && gzip -9 -f ${x}
-		done
-	eend 0
-
-	if use nls
-	then
-		ebegin "gemini-koi8 fonts..."
-			cd ${WORKDIR}/ukr
-			gunzip *.Z
-			gzip -9 *.pcf
-			cd ${S}
-			cp -a ${WORKDIR}/ukr ${D}/usr/X11R6/lib/X11/fonts
-		eend 0
-	fi
-
-	exeinto /etc/X11
-	# new session management script
-	doexe ${FILES_DIR}/chooser.sh
-	# new display manager script
-	doexe ${FILES_DIR}/startDM.sh
-	exeinto /etc/X11/Sessions
-	for x in ${FILES_DIR}/Sessions/*
-	do
-		[ -f ${x} ] && doexe ${x}
-	done
-	insinto /etc/env.d
-	doins ${FILES_DIR}/10xfree
-	insinto /etc/X11/xinit
-	doins ${FILES_DIR}/xinitrc
-	exeinto /etc/X11/xdm
-	doexe ${FILES_DIR}/Xsession ${FILES_DIR}/Xsetup_0
-	insinto /etc/X11/fs
-	newins ${FILES_DIR}/xfs.config config
-	if use pam
-	then
-		insinto /etc/pam.d
-		newins ${FILES_DIR}/xdm.pamd xdm
-		# Need to fix console permissions first
-		newins ${FILES_DIR}/xserver.pamd xserver
-	fi
-	exeinto /etc/init.d
-	newexe ${FILES_DIR}/xdm.start xdm
-	newexe ${FILES_DIR}/xfs.start xfs
-	insinto /etc/conf.d
-	newins ${FILES_DIR}/xfs.conf.d xfs
-
-	# we want libGLU.so* in /usr/lib
-	mv ${D}/usr/X11R6/lib/libGLU.* ${D}/usr/lib
-
-	# next section is to setup the dynamic libGL stuff
-	ebegin "Moving libGL and friends for dynamic switching"
-		dodir /usr/lib/opengl/xfree/{lib,extensions,include}
-		local x=""
-		for x in ${D}/usr/X11R6/lib/libGL.so* \
-			${D}/usr/X11R6/lib/libGL.la \
-			${D}/usr/X11R6/lib/libGL.a \
-			${D}/usr/X11R6/lib/libMesaGL.so
-		do
-			if [ -f ${x} -o -L ${x} ]
-			then
-				# libGL.a cause problems with tuxracer, etc
-				mv -f ${x} ${D}/usr/lib/opengl/xfree/lib
-			fi
-		done
-		for x in ${D}/usr/X11R6/lib/modules/extensions/libglx*
-		do
-			if [ -f ${x} -o -L ${x} ]
-			then
-				mv -f ${x} ${D}/usr/lib/opengl/xfree/extensions
-			fi
-		done
-		for x in ${D}/usr/X11R6/include/GL/{gl.h,glx.h,glxtokens.h}
-		do
-			if [ -f ${x} -o -L ${x} ]
-			then
-				mv -f ${x} ${D}/usr/lib/opengl/xfree/include
-			fi
-		done
-	eend 0
-
-	# Make the core cursor the default.  People seem not to like whiteglass
-	# for some reason.
-	dosed 's:whiteglass:core:' /usr/share/cursors/xfree/default/index.theme
-
-	einfo "Stripping binaries and libraries..."
-	# This bit I got from Redhat ... strip binaries and drivers ..
-	# NOTE:  We do NOT want to strip the drivers, modules or DRI modules!
-	for x in $(find ${D}/ -type f -perm +0111 -exec file {} \; | \
-	           grep -v ' shared object,' | \
-	           sed -n -e 's/^\(.*\):[  ]*ELF.*, not stripped/\1/p')
-	do
-	if [ -f ${x} ]
-		then
-			# Dont do the modules ...
-			if [ "${x/\/usr\/X11R6\/lib\/modules}" = "${x}" ]
-			then
-				echo "`echo ${x} | sed -e "s|${D}||"`"
-				strip ${x} || :
-			fi
-		fi
-	done
-	# Now do the libraries ...
-	for x in ${D}/usr/{lib,lib/opengl/xfree/lib}/*.so.* \
-		${D}/usr/X11R6/{lib,lib/X11/locale/lib/common}/*.so.*
-	do
-		if [ -f ${x} ]
-		then
-			echo "`echo ${x} | sed -e "s|${D}||"`"
-			strip --strip-debug ${x} || :
-		fi
-	done
-
-	# Install TaD's gentoo cursors
-	insinto /usr/share/cursors/xfree/gentoo/cursors
-	doins ${WORKDIR}/cursors/gentoo/cursors/*
-	insinto /usr/share/cursors/xfree/gentoo-blue/cursors
-	doins ${WORKDIR}/cursors/gentoo-blue/cursors/*
-	insinto /usr/share/cursors/xfree/gentoo-silver/cursors
-	doins ${WORKDIR}/cursors/gentoo-silver/cursors/*
-
-}
-
-pkg_preinst() {
-
-	# These changed from a directory/file to a symlink and reverse
-	if [ ! -L ${ROOT}/usr/X11R6/lib/X11/XftConfig ] && \
-	   [ -f ${ROOT}/usr/X11R6/lib/X11/XftConfig ]
-	then
-		rm -rf ${ROOT}/usr/X11R6/lib/X11/XftConfig
-	fi
-
-	if [ -L ${ROOT}/etc/X11/app-defaults ]
-	then
-		rm -f ${ROOT}/etc/X11/app-defaults
-	fi
-
-	if [ ! -L ${ROOT}/usr/X11R6/lib/X11/app-defaults ] && \
-	   [ -d ${ROOT}/usr/X11R6/lib/X11/app-defaults ]
-	then
-		if [ ! -d ${ROOT}/etc/X11/app-defaults ]
-		then
-			mkdir -p ${ROOT}/etc/X11/app-defaults
-		fi
-
-		mv -f ${ROOT}/usr/X11R6/lib/X11/app-defaults ${ROOT}/etc/X11
-	fi
-
-	if [ -L ${ROOT}/usr/X11R6/lib/X11/xkb ]
-	then
-		rm -f ${ROOT}/usr/X11R6/lib/X11/xkb
-	fi
-
-	if [ ! -L ${ROOT}/etc/X11/xkb ] && \
-	   [ -d ${ROOT}/etc/X11/xkb ]
-	then
-		if [ ! -d ${ROOT}/usr/X11R6/lib/X11/xkb ]
-		then
-			mkdir -p ${ROOT}/usr/X11R6/lib/X11
-		fi
-
-	    mv -f ${ROOT}/etc/X11/xkb ${ROOT}/usr/X11R6/lib/X11
-	fi
-
-	# clean the dinamic libGL stuff's home to ensure
-	# we dont have stale libs floating around
-	if [ -d ${ROOT}/usr/lib/opengl/xfree ]
-	then
-		rm -rf ${ROOT}/usr/lib/opengl/xfree/*
-	fi
-
-	# clean out old fonts.* and encodings.dir files, as we
-	# will regenerate them
-	find ${ROOT}/usr/X11R6/lib/X11/fonts/ -type f -name 'fonts.*' \
-		-exec rm -f {} \;
-	find ${ROOT}/usr/X11R6/lib/X11/fonts/ -type f -name 'encodings.dir' \
-		-exec rm -f {} \;
-
-	# make sure we do not have any stale files lying round
-	# that could break things.
-	rm -f ${ROOT}/usr/X11R6/lib/libGL*
-}
-
-update_XftConfig() {
-
-	if [ "${ROOT}" = "/" ]
-	then
-		local CHECK1="f901d29ec6e3cbb0a5b0fd5cbdd9ff33"
-		local CHECK2="$(md5sum ${ROOT}/etc/X11/XftConfig | cut -d ' ' -f1)"
-
-		if [ "${CHECK1}" = "${CHECK2}" ]
-		then
-			echo
-			ewarn "Due to an invalid /etc/X11/XftConfig from x11-base/xfree-4.2.1,"
-			ewarn "/etc/X11/XftConfig is being updated automatically.  Your old"
-			ewarn "version of /etc/X11/XftConfig will be backed up as:"
-			ewarn
-			ewarn "  ${ROOT}etc/X11/XftConfig.bak"
-			echo
-
-			cp -a ${ROOT}/etc/X11/XftConfig \
-				${ROOT}/etc/X11/XftConfig.bak
-			mv -f ${ROOT}/etc/X11/XftConfig.new \
-				${ROOT}/etc/X11/XftConfig
-			rm -f ${ROOT}/etc/X11/._cfg????_XftConfig
-		else
-			rm -f ${ROOT}/etc/X11/XftConfig.new
-		fi
-	fi
-}
-
-
-pkg_postinst() {
-
-	env-update
-
-	if [ "${ROOT}" = "/" ]
-	then
-		local x=""
-
-		umask 022
-
-		# This one cause ttmkfdir to segfault :/
-		#rm -f ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/large/gbk-0.enc.gz
-
-		# ********************************************************************
-		#  A note about fonts and needed files:
-		#
-		#  1)  Create /usr/X11R6/lib/X11/fonts/encodings/encodings.dir
-		#
-		#  2)  Create font.scale for TrueType fonts (need to do this before
-		#      we create fonts.dir files, else fonts.dir files will be
-		#      invalid for TrueType fonts...)
-		#
-		#  3)  Now Generate fonts.dir files.
-		#
-		#  CID fonts is a bit more involved, but as we do not install any,
-		#  thus I am not going to bother.
-		#
-		#  <azarah@gentoo.org> (20 Oct 2002)
-		#
-		# ********************************************************************
-
-		ebegin "Generating encodings.dir..."
-			# Create the encodings.dir in /usr/X11R6/lib/X11/fonts/encodings
-			LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-			${ROOT}/usr/X11R6/bin/mkfontdir -n \
-				-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings \
-				-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/large \
-				-- ${ROOT}/usr/X11R6/lib/X11/fonts/encodings
-		eend 0
-
-		if [ -x ${ROOT}/usr/X11R6/bin/ttmkfdir ]
-		then
-			ebegin "Creating fonts.scale files..."
-				for x in $(find ${ROOT}/usr/X11R6/lib/X11/fonts/* -type d -maxdepth 1)
-				do
-					[ -z "$(ls ${x}/)" ] && continue
-					[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-					# Only generate .scale files if there are truetype
-					# fonts present ...
-					if [ "${x/encodings}" = "${x}" -a \
-					     -n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]
-					then
-						LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-						${ROOT}/usr/X11R6/bin/ttmkfdir -x 2 \
-							-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/encodings.dir \
-							-o ${x}/fonts.scale -d ${x}
-					fi
-				done
-			eend 0
-		fi
-
-		ebegin "Generating fonts.dir files..."
-			for x in $(find ${ROOT}/usr/X11R6/lib/X11/fonts/* -type d -maxdepth 1)
-			do
-				[ -z "$(ls ${x}/)" ] && continue
-				[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-				if [ "${x/encodings}" = "${x}" ]
-				then
-					LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-					${ROOT}/usr/X11R6/bin/mkfontdir \
-						-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings \
-						-e ${ROOT}/usr/X11R6/lib/X11/fonts/encodings/large \
-						-- ${x}
-				fi
-			done
-		eend 0
-
-		ebegin "Generating Xft Cache..."
-			for x in $(find ${ROOT}/usr/X11R6/lib/X11/fonts/* -type d -maxdepth 1)
-			do
-				[ -z "$(ls ${x}/)" ] && continue
-				[ "$(ls ${x}/)" = "fonts.cache-1" ] && continue
-
-				# Only generate XftCache files if there are truetype
-				# fonts present ...
-				if [ "${x/encodings}" = "${x}" -a \
-				     -n "$(find ${x} -iname '*.[otps][pft][cfad]' -print)" ]
-				then
-					LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${ROOT}/usr/X11R6/lib" \
-					${ROOT}/usr/X11R6/bin/xftcache ${x} &> /dev/null
-				fi
-			done
-		eend 0
-
-		ebegin "Fixing permissions..."
-			find ${ROOT}/usr/X11R6/lib/X11/fonts/ -type f -name 'font.*' \
-				-exec chmod 0644 {} \;
-		eend 0
-
-		# danarmak found out that fc-cache should be run AFTER all the above
-		# stuff, as otherwise the cache is invalid, and has to be run again
-		# as root anyway
-		if [ -x ${ROOT}/usr/bin/fc-cache ]
-		then
-			ebegin "Creating FC font cache..."
-				HOME="/root" ${ROOT}/usr/bin/fc-cache -f
-			eend 0
-		fi
-
-		# Switch to the xfree implementation.
-		# Use new opengl-update that will not reset user selected
-		# OpenGL interface ...
-		echo; ${ROOT}/usr/sbin/opengl-update --use-old xfree
-	fi
-
-	for x in $(find ${ROOT}/usr/X11R6/lib/X11/locale/ -mindepth 1 -type d)
-	do
-		# Remove old compose files we might have created incorrectly
-		# CJK must not have that file (otherwise XIM don't works some times)
-		case `basename ${x}` in
-			ja*|ko*|zh*)
-				if [ -r "${x}/Compose" ]
-				then
-					rm -f ${x}/Compose
-				fi
-				;;
-		esac
-	done
-
-	# Update /etc/X11/XftConfig if its the one from Xft1.2, as its
-	# invalid for Xft1.1 ....
-	# NOTE:  This should not be needed for xfree-4.2.99 or later,
-	#        but lets not take chances with people that may downgrade
-	#        at a later stage ....
-	update_XftConfig
-
-	# These need to be owned by root and the correct permissions
-	# (bug #8281)
-	for x in ${ROOT}/tmp/.{ICE,X11}-unix
-	do
-		if [ ! -d ${x} ]
-		then
-			mkdir -p ${x}
-		fi
-
-		chown root:root ${x}
-		chmod 1777 ${x}
-	done
-
-	if use 3dfx
-	then
-		echo
-		einfo "If using a 3DFX card, and you had \"3dfx\" in your USE flags,"
-		einfo "please merge media-libs/glide-v3 if you have not done so yet"
-		einfo "by doing:"
-		einfo
-		einfo "  # emerge media-libs/glide-v3"
-		echo
-	fi
-	echo
-	ewarn "BEWARE 1:"
-	ewarn "This version of XFree won't work with ati-drivers-2.5.1-r1"
-	ewarn "if you are using them please unmerge ati-drivers"
-	ewarn " and emerge xfree-drm"
-	echo
-	ewarn "BEWARE 2:"
-	ewarn "If you experience font corruption on OpenOffice.org or similar"
-	ewarn "glitches please remake your XF86Config"
-	echo
-
-	einfo "Please note that the xcursors are in /usr/share/cursors/xfree"
-	einfo "Any custom cursor sets should be placed in that directory"
-	einfo "This is different from the previous versions of 4.3 and"
-	einfo "the 4.2.99 series."
-	echo
-	ewarn "New in this release: if you wish to set system-wide default"
-	ewarn "cursors, please set them in /usr/local/share/cursors/xfree"
-	ewarn "so that future emerges will not overwrite those settings"
-	echo
-	einfo "Listening on ipv4 is disabled by default with startx."
-	einfo "To enable it or disable ipv6, edit /usr/X11R6/bin/startx."
-}
-
-pkg_postrm() {
-
-	# Fix problematic links
-	if [ -x ${ROOT}/usr/X11R6/bin/XFree86 ]
-	then
-		ln -snf ../X11R6/bin ${ROOT}/usr/bin/X11
-		ln -snf ../X11R6/include/X11 ${ROOT}/usr/include/X11
-		ln -snf ../X11R6/include/DPS ${ROOT}/usr/include/DPS
-		ln -snf ../X11R6/include/GL ${ROOT}/usr/include/GL
-		ln -snf ../X11R6/lib/X11 ${ROOT}/usr/lib/X11
-	fi
-}