diff options
Diffstat (limited to 'sys-kernel/mips-sources/mips-sources-2.6.13.5.ebuild')
| -rw-r--r-- | sys-kernel/mips-sources/mips-sources-2.6.13.5.ebuild | 380 |
1 files changed, 0 insertions, 380 deletions
diff --git a/sys-kernel/mips-sources/mips-sources-2.6.13.5.ebuild b/sys-kernel/mips-sources/mips-sources-2.6.13.5.ebuild deleted file mode 100644 index 9232e1d5195f..000000000000 --- a/sys-kernel/mips-sources/mips-sources-2.6.13.5.ebuild +++ /dev/null @@ -1,380 +0,0 @@ -# Copyright 1999-2005 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Header: /var/cvsroot/gentoo-x86/sys-kernel/mips-sources/mips-sources-2.6.13.5.ebuild,v 1.1 2005/12/20 18:10:41 kumba Exp $ - - -# INCLUDED: -# 1) linux sources from kernel.org -# 2) linux-mips.org CVS snapshot diff from 14 Sep 2005 -# 3) Generic Fixes -# 4) Security fixes -# 5) Patch for IP30 Octane Support (http://www.linux-mips.org/~skylark/) -# 5) Patch for IP28 Octane Support (http://home.alphastar.de/fuerst/download.html) -# 6) Patch for Remaining Cobalt Bits (http://www.colonel-panic.org/cobalt-mips/) -# 7) Experimental patches (IP27 hacks, et al) - - -#//------------------------------------------------------------------------------ - - - -# Version Data -OKV=${PV/_/-} -CVSDATE="20050914" # Date of diff between kernel.org and lmo CVS -SECPATCHVER="1.15" # Tarball version for security patches -GENPATCHVER="1.14" # Tarball version for generic patches -EXTRAVERSION="-mipscvs-${CVSDATE}" -KV="${OKV}${EXTRAVERSION}" -F_KV="${OKV}" # Fetch KV, used to know what mipscvs diff to grab. -STABLEVER="${F_KV}" # Stable Version (2.6.x) -PATCHVER="" -USERC="no" # If set to "yes", then attempt to use an RC kernel -USEPNT="yes" # If set to "yes", then attempt to use a point-release (2.6.x.y) - -# Directories -S="${WORKDIR}/linux-${OKV}-${CVSDATE}" -MIPS_PATCHES="${WORKDIR}/mips-patches" -MIPS_SECURITY="${WORKDIR}/security" - -# Inherit Eclasses -ETYPE="sources" -inherit kernel eutils versionator - -# Portage Vars -HOMEPAGE="http://www.linux-mips.org/ http://www.gentoo.org/" -SLOT="${OKV}" -PROVIDE="virtual/linux-sources virtual/alsa" -KEYWORDS="-* mips" -IUSE="cobalt ip27 ip28 ip30" - - -# If USERC == "yes", use a release candidate kernel (2.6.X-rcY) -# Do not set this to "yes" if using a point-release kernel -if [ "${USERC}" = "yes" ]; then - KVXY="$(get_version_component_range 1-2)" # Kernel Major/Minor - KVZ="$(get_version_component_range 3)" # Kernel Revision Pt. 1 - KVRC="$(get_version_component_range 4)" # Kernel RC - F_KV="$(get_version_component_range 1-3)" - STABLEVER="${KVXY}.$((${KVZ} - 1))" # Last stable version (Rev - 1) - PATCHVER="mirror://kernel/linux/kernel/v2.6/testing/patch-${OKV}.bz2" - EXTRAVERSION="-${KVRC}-mipscvs-${CVSDATE}" - KV="${OKV}-${EXTRAVERSION}" -fi - -# If USEPNT == "yes", use a point release kernel (2.6.x.y) -# Do not set this to "yes" if using a release candidate kernel -if [ "${USEPNT}" = "yes" ]; then - F_KV="$(get_version_component_range 1-3)" # Get Maj/Min/Rev (x.y.z) - STABLEVER="${F_KV}" # Last Revision release - PATCHVER="mirror://kernel/linux/kernel/v2.6/patch-${OKV}.bz2" # Patch for new point release - EXTRAVERSION=".$(get_version_component_range 4)-mipscvs-${CVSDATE}" - KV="${OKV}${EXTRAVERSION}" -fi - - -DESCRIPTION="Linux-Mips CVS sources for MIPS-based machines, dated ${CVSDATE}" -SRC_URI="mirror://kernel/linux/kernel/v2.6/linux-${STABLEVER}.tar.bz2 - mirror://gentoo/mipscvs-${F_KV}-${CVSDATE}.diff.bz2 - mirror://gentoo/${PN}-security_patches-${SECPATCHVER}.tar.bz2 - mirror://gentoo/${PN}-generic_patches-${GENPATCHVER}.tar.bz2 - ${PATCHVER}" - - - -#//------------------------------------------------------------------------------ - - - -# Error message -err_only_one_arch_allowed() { - echo -e "" - eerror "A patchset for a specific machine-type has already been selected." - eerror "No other patches for machines-types are permitted. You will need a" - eerror "separate copy of the kernel sources for each different machine-type" - eerror "you want to build a kernel for." - die "Only one machine-type patchset allowed" -} - - -# Check our USE flags for machine-specific flags and give appropriate warnings. -# Hope the user isn't crazy enough to try using combinations of these flags. -# Only use one machine-specific flag at a time for each type of desired machine-support. -# -# Affected machines: ip27 ip28 ip30 -# Not Affected: cobalt ip22 ip32 -pkg_setup() { - local arch_is_selected="no" - - # See if we're using IP27 (Origin) - if use ip27; then -# echo -e "" -# eerror "SGI Origin (IP27) Support has been disabled in this ebuild" -# eerror "revision. If you wish to merge IP27 sources, then" -# eerror "run USE=\"ip27\" emerge =mips-sources-2.6.12.5" -# die "IP27 Support disabled." - if [ "${arch_is_selected}" = "no" ]; then - echo -e "" - einfo "IP27 support can be considered a game of Russian Roulette. It'll work" - einfo "great for some but not for others. It also uses some rather horrible" - einfo "hacks to get going -- hopefully these will be repaired in the future." - echo -e "" - ewarn "Please keep all kittens and any other small, cute, and fluffy creatures" - ewarn "away from an IP27 Box running these sources. Failure to do so may cause" - ewarn "the IP27 to consume the hapless creature. Consider this your only" - ewarn "warning regarding the experimental nature of this particular machine." - echo -e "" - arch_is_selected="yes" - else - err_only_one_arch_allowed - fi - fi - - - # See if we're using IP28 (Indigo2 Impact R10000) - if use ip28; then - if [ "${arch_is_selected}" = "no" ]; then - echo -e "" - einfo "Support for the Indigo2 Impact R10000 is probably even more experimental" - einfo "than Octane support. If you seriously do not have a clue in the world about" - einfo "what you are doing, what an IP28 is, what a mips is, or even what gentoo is," - einfo "then stop now, and return to regularly scheduled x86 programming. Consider" - einfo "this the warning that you are about to venture into no-man's land with a" - einfo "machine that is barely supported, likely very unstable, and may very well" - einfo "eat your grandmother's pet cat Fluffy." - echo -e "" - ewarn "That said, support for this system REQUIRES that you use the ip28 cascade" - ewarn "profile (default-linux/mips/mips64/ip28/XXXX.Y), because a very special" - ewarn "patch is used on the system gcc, kernel-gcc (gcc-mips64) and the kernel" - ewarn "itself in order to support this machine. These patches will only be applied" - ewarn "if \"ip28\" is defined in USE, which the profile sets. Other things to keep" - ewarn "in mind are that this system requires a full 64-bit kernel, serial-console" - einfo "only (Impact graphics not supported yet), and _nothing_ is guaranteed to" - einfo "work smoothly." - echo -e "" - arch_is_selected="yes" - else - err_only_one_arch_allowed - fi - fi - - - # See if we're using IP30 (Octane) - if use ip30; then - if [ "${arch_is_selected}" = "no" ]; then - echo -e "" - einfo "With this release, Octane now uses the qla1280 driver. Please refrain" - einfo "from using the old qlogicisp driver. It is marked BROKEN and will be" - einfo "removed from the kernel soon. qla1280 is a much better driver, as you" - einfo "can now use multiple disks with it." - echo -e "" - einfo "This release also has a basic driver for VPro-based systems now. Like" - einfo "MGRAS, it's console-only, no X support yet." - echo -e "" - arch_is_selected="yes" - else - err_only_one_arch_allowed - fi - fi - - - # See if we're on a cobalt system (must use the cobalt-mips profile) - if use cobalt; then - echo -e "" - einfo "Please keep in mind that the 2.6 kernel will NOT boot on Cobalt" - einfo "systems that are still using the old Cobalt bootloader. In" - einfo "order to boot a 2.6 kernel on Cobalt systems, you must be using" - einfo "Peter Horton's new bootloader, which does not have the kernel" - einfo "size limitation that the older bootloader has. If you want" - einfo "to use the newer bootloader, make sure you have sys-boot/colo" - einfo "installed and setup." - echo -e "" - arch_is_selected="yes" - fi -} - - - -#//------------------------------------------------------------------------------ - - - -# Generic Patches - Safe to use globally -do_generic_patches() { - echo -e "" - ebegin ">>> Generic Patches" - # IP22 Patches - epatch ${MIPS_PATCHES}/misc-2.6.11-ip22-chk-consoleout-is-serial.patch - - # IP32 Patches (Safe for non-IP32 use) - epatch ${MIPS_PATCHES}/misc-2.6.12-ip32-onion2-gbefb-fixes.patch - epatch ${MIPS_PATCHES}/misc-2.6.10-ip32-tweak-makefile.patch - epatch ${MIPS_PATCHES}/misc-2.6.11-ip32-mace-is-always-eth0.patch - epatch ${MIPS_PATCHES}/misc-2.6.12-ip32-stupid-gbefb-typo.patch - - # Cobalt Patches (Safe for non-Cobalt use) - epatch ${MIPS_PATCHES}/misc-2.6.13-cobalt-bits.patch - - # Generic - epatch ${MIPS_PATCHES}/misc-2.6.13-ths-mips-tweaks.patch - epatch ${MIPS_PATCHES}/misc-2.6.13-add-ramdisk-back.patch - epatch ${MIPS_PATCHES}/misc-2.6.12-mips-iomap-functions.patch - epatch ${MIPS_PATCHES}/misc-2.6.12-seccomp-no-default.patch - epatch ${MIPS_PATCHES}/misc-2.6.11-add-byteorder-to-proc.patch - epatch ${MIPS_PATCHES}/misc-2.6.13-mm1-fix-md-oops-on-shutdown.patch - epatch ${MIPS_PATCHES}/misc-2.6.13-rev-i18n.patch - epatch ${MIPS_PATCHES}/misc-2.6.13-n32-fix-sigsuspend.patch - epatch ${MIPS_PATCHES}/misc-2.6.14-csum_tcpudp_nofold-sign-extend.patch - epatch ${MIPS_PATCHES}/misc-2.6.14-fix-excessive-signal-lat.patch - epatch ${MIPS_PATCHES}/misc-2.6.14-add-sock_dccp-def.patch - epatch ${MIPS_PATCHES}/misc-2.6.14-r14k-cpu-prid.patch - - # Ugly Hacks - if ! use ip28 && ! use ip30; then - epatch ${MIPS_PATCHES}/misc-2.6.13-ugly-wrong-kphysaddr-hack.patch - fi - eend -} - - -# NOT safe for production systems -# Use at own risk, do _not_ file bugs on effects of these patches -do_sekrit_patches() { - # /* EXPERIMENTAL - DO NOT USE IN PRODUCTION KERNELS */ - - # No Sekrit Patches! - sleep 0 - - # /* EXPERIMENTAL - DO NOT USE IN PRODUCTION KERNELS */ -} - - -do_security_patches() { - echo -e "" - ebegin ">>> Applying Security Fixes" - einfo ">>> None to apply! ..." - echo -e "" -## epatch ${MIPS_SECURITY}/ - eend -} - - - -#//------------------------------------------------------------------------------ - - - -# These patches are separate from generic patches for a good reason - namely because it is -# possible (but untested) that patches for one machine-type may conflict with patches from -# another machine type and therefore produce unwanted side-effects. We therefore enforce -# this by checking if an arch patch has already been applied, and if so, error out. - -# SGI Origin (IP27) -do_ip27_support() { - echo -e "" - einfo ">>> Patching kernel for SGI Origin (IP27) support ..." - epatch ${MIPS_PATCHES}/misc-2.6.13-ioc3-metadriver-r25.patch - epatch ${MIPS_PATCHES}/misc-2.6.13-ip27-horrible-hacks_may-eat-kittens.patch - epatch ${MIPS_PATCHES}/misc-2.6.14-ip27-rev-pci-tweak.patch -} - -# SGI Indigo2 Impact R10000 (IP28) -do_ip28_support() { - echo -e "" - einfo ">>> Patching kernel for SGI Indigo2 Impact R10000 (IP28) support ..." - epatch ${MIPS_PATCHES}/misc-2.6.13-ip28-i2_impact-support.patch -} - - -# SGI Octane 'Speedracer' (IP30) -do_ip30_support() { - echo -e "" - einfo ">>> Patching kernel for SGI Octane (IP30) support ..." - epatch ${MIPS_PATCHES}/misc-2.6.13-ioc3-metadriver-r25.patch - epatch ${MIPS_PATCHES}/misc-2.6.13-ip30-octane-support-r26.patch -} - - - -#//------------------------------------------------------------------------------ - - - -# Renames source trees for the few machines that we have separate patches for -rename_source_tree() { - if [ ! -z "${1}" ]; then - if use ${1}; then - mv ${S} ${S}.${1} - S="${S}.${1}" - fi - fi -} - - - -#//------------------------------------------------------------------------------ - - - -src_unpack() { - unpack ${A} - mv ${WORKDIR}/linux-${STABLEVER} ${WORKDIR}/linux-${OKV}-${CVSDATE} - cd ${S} - - - # If USERC == "yes", use a release candidate kernel (2.6.x-rcy) - # OR - # if USEPNT == "yes", use a point-release kernel (2.6.x.y) - if [ "${USERC}" = "yes" -o "${USEPNT}" = "yes" ]; then - echo -e "" - einfo ">>> linux-${STABLEVER} --> linux-${OKV} ..." - epatch ${WORKDIR}/patch-${OKV} - fi - - - # Update the vanilla sources with linux-mips CVS changes - echo -e "" - einfo ">>> linux-${OKV} --> linux-${OKV}-${CVSDATE} patch ..." - epatch ${WORKDIR}/mipscvs-${F_KV}-${CVSDATE}.diff - - # Generic patches we always include - do_generic_patches - - # Machine-specific patches - use ip27 && do_ip27_support - use ip28 && do_ip28_support - use ip30 && do_ip30_support - - # Patches for experimental use - do_sekrit_patches - - # Security Fixes - do_security_patches - - - # All done, resume normal portage work - kernel_universal_unpack -} - - -src_install() { - use ip27 && rename_source_tree ip27 - use ip28 && rename_source_tree ip28 - use ip30 && rename_source_tree ip30 - - kernel_src_install -} - -pkg_postinst() { - local my_ksrc="${S##*/}" - use ip27 && my_ksrc="${my_ksrc}.ip27" - use ip28 && my_ksrc="${my_ksrc}.ip28" - use ip30 && my_ksrc="${my_ksrc}.ip30" - - if [ ! -e ${ROOT}usr/src/linux ]; then - rm -f ${ROOT}usr/src/linux - ln -sf ${my_ksrc} ${ROOT}/usr/src/linux - fi -} - - -#//------------------------------------------------------------------------------ |