proj/gentoo: Initial commit

This commit represents a new era for Gentoo:
Storing the gentoo-x86 tree in Git, as converted from CVS.

This commit is the start of the NEW history.
Any historical data is intended to be grafted onto this point.

Creation process:
1. Take final CVS checkout snapshot
2. Remove ALL ChangeLog* files
3. Transform all Manifests to thin
4. Remove empty Manifests
5. Convert all stale $Header$/$Id$ CVS keywords to non-expanded Git $Id$
5.1. Do not touch files with -kb/-ko keyword flags.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Thanks: Alec Warner <antarus@gentoo.org> - did the GSoC 2006 migration tests
X-Thanks: Robin H. Johnson <robbat2@gentoo.org> - infra guy, herding this project
X-Thanks: Nguyen Thai Ngoc Duy <pclouds@gentoo.org> - Former Gentoo developer, wrote Git features for the migration
X-Thanks: Brian Harring <ferringb@gentoo.org> - wrote much python to improve cvs2svn
X-Thanks: Rich Freeman <rich0@gentoo.org> - validation scripts
X-Thanks: Patrick Lauer <patrick@gentoo.org> - Gentoo dev, running new 2014 work in migration
X-Thanks: Michał Górny <mgorny@gentoo.org> - scripts, QA, nagging
X-Thanks: All of other Gentoo developers - many ideas and lots of paint on the bikeshed

3 files changed, 121 insertions, 0 deletions

diff --git a/sys-apps/pciutils/files/conf.d-pciparm b/sys-apps/pciutils/files/conf.d-pciparm
new file mode 100644
index 000000000000..f036b15ad20c
--- /dev/null
+++ b/sys-apps/pciutils/files/conf.d-pciparm
@@ -0,0 +1,28 @@
+# PCI tweaking article:
+# http://www.gentoo.org/doc/en/articles/hardware-stability-p2.xml
+#
+# Apply to all devices:
+# PCIPARM_ALL="...."
+# Cards also can be addressed by vid:pid or by bus:slot.func
+# (see setpci man page relative to -d and -s options)
+# PCIPARM_(BUS|VENDOR)_#="...."
+# Where # is sequentially numbered from zero.
+
+# Examples:
+# "open up" the PCI bus by allowing fairly long bursts
+# for all devices, increasing performance
+# (equivalent to: setpci -v -d *:* latency_timer=b0)
+#PCIPARM_ALL="latency_timer=b0"
+
+# maximize latency timers for network and audio,
+# allowing them to transmit more data per burst,
+# preventing buffer over/under-run conditions
+#PCIPARM_BUS_0="00:04.0 latency_timer=ff"
+#PCIPARM_BUS_1="01:04.0 latency_timer=ff"
+#PCIPARM_VENDOR_0="1057:3410 latency_timer=ff"
+
+# -v : whether to be verbose about changes
+# -D : dry-run, no commit
+# -f : do not warn if the change is already set
+# (see the setpci manpage for more advanced options)
+SETPCI_OPT="-f"
diff --git a/sys-apps/pciutils/files/init.d-pciparm b/sys-apps/pciutils/files/init.d-pciparm
new file mode 100644
index 000000000000..d7973bf81412
--- /dev/null
+++ b/sys-apps/pciutils/files/init.d-pciparm
@@ -0,0 +1,80 @@
+#!/sbin/runscript
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+depend() {
+	before bootmisc hdparm
+	after localmount
+}
+
+checkconfig() {
+	if [ ! -f /etc/conf.d/pciparm ]; then
+		ewarn "/etc/conf.d/pciparm does not exist, skipping"
+		return 1
+	fi
+
+	if [ -z "${PCIPARM_ALL}" -a -z "${PCIPARM_BUS_0}" -a  -z "${PCIPARM_VENDOR_0}" ]; then
+		ewarn "None of PCIPARM_ALL, PCIPARM_BUS_* or PCIPARM_VENDOR_* set in /etc/conf.d/pciparm"
+		return 1
+	fi
+}
+
+do_setpci() {
+	#ewarn "do_setpci: /usr/sbin/setpci $SETPCI_OPT $@"
+	SWITCH=$1
+	SPEC_ID=$2
+	shift 2
+	case "$SWITCH" in
+		-d) DESC=vendor ;;
+		-s) DESC=bus ;;
+		*) eerror "Unknown setpci type: $SWITCH" ; return 1 ;;
+	esac
+
+	if [ -z "$SPEC_ID" ]; then
+		eerror "Missing device specifier!"
+		return 1
+	fi
+	if [ -z "$*" ]; then
+		eerror "Missing configuration to set for ($DESC) $SPEC_ID!"
+		return 1
+	fi
+
+	ebegin "Setting PCI params for ($DESC) $SPEC_ID to $@"
+	/usr/sbin/setpci $SETPCI_OPT $SWITCH $SPEC_ID "$@"
+	rc=$?
+	eend $rc
+	return $rc
+}
+
+do_setpci_array() {
+	name=$1
+	shift
+	i=0
+	while true; do
+		eval opt="\$${name}_$i"
+		# End of loop
+		[ -z "${opt}" ] && break
+		# Pass in all other parameters here, in case we want to use multiple
+		# arguments later.
+		do_setpci "$@" $opt #|| return 1
+		i=$(($i+1))
+	done
+}
+
+start() {
+	if get_bootparam "nopciparm" ; then
+		ewarn "Skipping pciparm init as requested in kernel cmdline"
+		return 0
+	fi
+
+	checkconfig || return 1
+	
+	# We do not exit after any errors presently, because it might be a
+	# stability-related fix after a failure.
+	[ -n "$PCIPARM_ALL" ] && \
+		do_setpci -d '*:*' $PCIPARM_ALL #|| return 1
+
+	do_setpci_array PCIPARM_BUS -s #|| return 1
+	do_setpci_array PCIPARM_VENDOR -d #|| return 1
+}
diff --git a/sys-apps/pciutils/files/pciutils-3.1.9-static-pc.patch b/sys-apps/pciutils/files/pciutils-3.1.9-static-pc.patch
new file mode 100644
index 000000000000..9e63b7ecd661
--- /dev/null
+++ b/sys-apps/pciutils/files/pciutils-3.1.9-static-pc.patch
@@ -0,0 +1,13 @@
+make sure all lib entries get into libs.private in the .pc file
+
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -61,7 +61,7 @@ $(PCILIBPC): libpci.pc.in
+ 		-e 's,@LIBDIR@,$(LIBDIR),' \
+ 		-e 's,@IDSDIR@,$(IDSDIR),' \
+ 		-e 's,@VERSION@,$(VERSION),' \
+-		-e 's,@LDLIBS@,$(LDLIBS),'
++		-e 's,@LDLIBS@,$(LDLIBS) $(LIB_LDLIBS),'
+ 
+ init.o: init.c $(INCL)
+ access.o: access.c $(INCL)