1 files changed, 119 insertions, 0 deletions
diff --git a/app-admin/geolizer/geolizer-2.01.10_p20070115-r1.ebuild b/app-admin/geolizer/geolizer-2.01.10_p20070115-r1.ebuild
new file mode 100644
index 000000000000..5bcb7e5bb3eb
--- /dev/null
+++ b/app-admin/geolizer/geolizer-2.01.10_p20070115-r1.ebuild
@@ -0,0 +1,119 @@
+# Copyright 1999-2012 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+# uses webapp.eclass to create directories with right permissions
+# probably slight overkill but works well
+
+EAPI="2"
+
+inherit versionator confutils eutils webapp db-use autotools
+
+WEBAPP_MANUAL_SLOT="yes"
+
+MY_PV="$(get_version_component_range 1-2)-$(get_version_component_range 3)"
+WEBALIZER_P="webalizer-${MY_PV}"
+GEOLIZER_P="${PN}_${MY_PV}-patch.${PV/*_p/}"
+
+DESCRIPTION="Webserver log file analyzer"
+HOMEPAGE="http://sysd.org/stas/node/10"
+SRC_URI="ftp://ftp.mrunix.net/pub/webalizer/old/${WEBALIZER_P}-src.tar.bz2
+	http://sysd.org/stas/files/active/0/${GEOLIZER_P}.tar.gz
+	mirror://gentoo/webalizer.conf.gz"
+
+LICENSE="GPL-2"
+KEYWORDS="~alpha ~amd64 ~hppa ~ppc ~ppc64 ~sparc ~x86"
+IUSE="nls"
+SLOT="0"
+
+DEPEND=">=sys-libs/db-4.2
+	>=sys-libs/zlib-1.1.4
+	>=media-libs/libpng-1.2
+	>=media-libs/gd-1.8.3
+	dev-libs/geoip"
+
+S="${WORKDIR}"/${WEBALIZER_P}
+
+pkg_setup() {
+	webapp_pkg_setup
+	confutils_require_built_with_all media-libs/gd png
+
+	# USE=nls has no real meaning if LINGUAS isn't set
+	if use nls && [[ -z "${LINGUAS}" ]]; then
+		ewarn "you must set LINGUAS in /etc/make.conf"
+		ewarn "if you want to USE=nls"
+		die "please either set LINGUAS or do not use nls"
+	fi
+}
+
+src_prepare() {
+	epatch "${WORKDIR}"/${PN}_${MY_PV}-patch/${PN}.patch \
+			"${FILESDIR}"/${P}-etc-geolizer-conf.patch \
+			"${FILESDIR}"/${P}-strip.patch
+	sed -i configure.in -e 's|libGeoIP.a|libGeoIP.so|g' || die
+	eautoreconf
+}
+
+src_configure() {
+	# really dirty hack; necessary due to a really gross ./configure
+	# basically, it just sets the natural language the program uses
+	# unfortunatly, this program only allows for one lang, so only the first
+	# entry in LINGUAS is used
+	if use nls; then
+		local longlang="$(grep ^${LINGUAS:0:2} "${FILESDIR}"/geolizer-language-list.txt)"
+		local myconf="${myconf} --with-language=${longlang:3}"
+	else
+		local myconf="${myconf} --with-language=english"
+	fi
+
+	econf --enable-dns \
+		--with-db=$(db_includedir) \
+		--with-dblib=$(db_libname) \
+		${myconf} \
+		|| die "econf failed"
+}
+
+src_install() {
+	webapp_src_preinst
+
+	newbin webalizer geolizer
+	fperms 755 /usr/bin/geolizer
+	dosym geolizer /usr/bin/geozolver || die 'dosym failed'
+	newman webalizer.1 geolizer.1 || die 'newman failed'
+
+	insinto /etc
+	newins "${WORKDIR}"/webalizer.conf geolizer.conf || die 'doins failed'
+	dosed "s/apache/apache2/g" /etc/geolizer.conf || die 'dosed failed'
+
+	dodoc CHANGES *README* INSTALL sample.conf "${FILESDIR}"/apache.geolizer || die 'dodoc failed'
+
+	webapp_src_install
+}
+
+pkg_postinst() {
+	elog
+	elog "It is suggested that you restart apache before using geolizer"
+	elog "You may want to review /etc/geolizer.conf and ensure that"
+	elog "OutputDir is set correctly"
+	elog
+	elog "Then just type geolizer to generate your stats."
+	elog "You can also use cron to generate them e.g. every day."
+	elog "They can be accessed via http://localhost/geolizer"
+	elog
+	elog "A sample Apache config file has been installed into"
+	elog "/usr/share/doc/${PF}/apache.geolizer"
+	elog "Please edit and install it as necessary"
+	elog
+
+	if [[ ${#LINGUAS} -gt 2 ]] && use nls; then
+		ewarn
+		ewarn "You have more than one language in LINGUAS"
+		ewarn "Due to the limitations of this packge, it was built"
+		ewarn "only with ${LINGUAS:0:2} support. If this is not what"
+		ewarn "you intended, please place the language you desire"
+		ewarn "_first_ in the list of LINGUAS in /etc/make.conf"
+		ewarn
+	fi
+
+	webapp_pkg_postinst
+}