diff options
Diffstat (limited to 'app-backup/amanda/amanda-3.5.1-r5.ebuild')
| -rw-r--r-- | app-backup/amanda/amanda-3.5.1-r5.ebuild | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/app-backup/amanda/amanda-3.5.1-r5.ebuild b/app-backup/amanda/amanda-3.5.1-r5.ebuild new file mode 100644 index 000000000000..77330631d602 --- /dev/null +++ b/app-backup/amanda/amanda-3.5.1-r5.ebuild @@ -0,0 +1,495 @@ +# Copyright 1999-2023 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=7 + +inherit autotools perl-module systemd toolchain-funcs + +DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver" +HOMEPAGE="http://www.amanda.org/" +SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz" + +LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+" +SLOT="0" +IUSE="curl gnuplot ipv6 kerberos minimal ndmp nls readline s3 samba systemd xfs" + +KEYWORDS="amd64 ppc ppc64 ~sparc x86" +DEPEND=" + acct-group/amanda + acct-user/amanda + app-arch/dump + app-arch/tar + dev-libs/glib:2 + dev-lang/perl:= + dev-perl/Encode-Locale + dev-perl/JSON + virtual/openssh + sys-libs/readline:= + app-alternatives/awk + kerberos? ( app-crypt/mit-krb5 ) + ndmp? ( net-libs/libtirpc:= ) + nls? ( virtual/libintl ) + samba? ( net-fs/samba:= ) + s3? ( net-misc/curl ) + !s3? ( curl? ( net-misc/curl ) ) + xfs? ( sys-fs/xfsdump ) + !minimal? ( + app-arch/mt-st:= + app-crypt/aespipe + app-crypt/gnupg + dev-perl/XML-Simple + sys-block/mtx + virtual/mailx + gnuplot? ( sci-visualization/gnuplot ) + )" +RDEPEND="${DEPEND}" +BDEPEND=" + app-text/docbook-xsl-stylesheets + app-text/docbook-xml-dtd + dev-lang/swig + dev-libs/libxslt + virtual/pkgconfig + nls? ( sys-devel/gettext )" + +PATCHES=( + "${FILESDIR}"/${P}-fno-common.patch + "${FILESDIR}"/${PN}-3.5.1-configure-clang16.patch +) + +MYFILESDIR="${T}/files" +ENVDIR="/etc/env.d" +ENVDFILE="97amanda" +TMPENVFILE="${T}/${ENVDFILE}" + +# This is a complete list of Amanda settings that the ebuild takes from the +# build environment. This allows users to alter the behavior of the package as +# upstream intended, but keeping with Gentoo style. We store a copy of them in +# /etc/env.d/97amanda during the install, so that they are preserved for future +# installed. This variable name must not start with AMANDA_, as we do not want +# it captured into the env file. +ENV_SETTINGS_AMANDA=" +AMANDA_GROUP_NAME +AMANDA_USER_NAME AMANDA_USER_HOMEDIR +AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_TAPE_DEVICE AMANDA_SERVER_INDEX +AMANDA_TAR_LISTDIR AMANDA_TAR +AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS +AMANDA_CONFIG_NAME AMANDA_TMPDIR" + +amanda_variable_setup() { + # Setting vars + local currentamanda + + # Grab the current settings + currentamanda="$(set | grep -E "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)" + + # First we set the defaults + AMANDA_GROUP_NAME=amanda + AMANDA_USER_NAME=amanda + AMANDA_USER_HOMEDIR=/var/spool/amanda + + # This installs Amanda, with the server. However, it could be a client, + # just specify an alternate server name in AMANDA_SERVER. + : ${AMANDA_SERVER:=${HOSTNAME}} + : ${AMANDA_SERVER_TAPE:=${AMANDA_SERVER}} + : ${AMANDA_SERVER_TAPE_DEVICE:="${EPREFIX}"/dev/nst0} + : ${AMANDA_SERVER_INDEX:=${AMANDA_SERVER}} + : ${AMANDA_TAR_LISTDIR:=${AMANDA_USER_HOMEDIR}/tar-lists} + : ${AMANDA_CONFIG_NAME:=DailySet1} + : ${AMANDA_TMPDIR:="${EPREFIX}"/var/tmp/amanda} + : ${AMANDA_DBGDIR:=${AMANDA_TMPDIR}} + # These are left empty by default + : ${AMANDA_PORTS_UDP:=""} + : ${AMANDA_PORTS_TCP:=""} + : ${AMANDA_PORTS_BOTH:=""} + : ${AMANDA_PORTS:=""} + + # What tar to use + : ${AMANDA_TAR:=/bin/tar} + + # Now pull in the old stuff + if [[ -f ${EROOT}${ENVDIR}/${ENVDFILE} ]]; then + # We don't just source it as we don't want everything in there. + eval $(grep -E "^AMANDA_" "${EROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS') + fi + + # Re-apply the new settings if any + [[ -n ${currentamanda} ]] && eval $(echo "${currentamanda}") +} + +pkg_setup() { + amanda_variable_setup + + # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to + # another host than HOSTNAME. + if use minimal && [[ ${AMANDA_SERVER} == ${HOSTNAME} ]]; then + elog "You are installing a client-only version of Amanda." + elog "You should set the variable \$AMANDA_SERVER to point at your" + elog "Amanda-tape-server, otherwise you will have to specify its name" + elog "when using amrecover on the client." + elog "For example: Use something like" + elog "AMANDA_SERVER=\"myserver\" emerge amanda" + elog + fi +} + +src_unpack() { + # we do not want the perl src_unpack + default +} + +src_prepare() { + default + use ndmp && eapply "${FILESDIR}"/${P}-tirpc.patch + # gentoo bug #331111 + sed -i '/^check-local: check-perl$/d' config/automake/scripts.am || die + sed -i '/^check-local:/s,syntax-check,,g' perl/Makefile.am || die + + # bug with glibc-2.16.0 + sed -i -e '/gets is a security/d' gnulib/stdio.in.h || die + + # https://bugs.gentoo.org/701416 sandbox violation + sed -i -e 's/case `"$SAMBA_CLIENT.*/case "Connection to nosuchhost.amanda.org failed" in/' config/amanda/dumpers.m4 || die + + eautoreconf + + # places for us to work in + mkdir -p "${MYFILESDIR}" || die + # Now we store the settings we just created + set | grep -E "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" || die + + # Prepare our custom files + einfo "Building custom configuration files" + local i # our iterator + local sedexpr # var for sed expr + sedexpr='' + for i in ${ENV_SETTINGS_AMANDA}; do + local val + eval "val=\"\${${i}}\"" + sedexpr="${sedexpr}s|__${i}__|${val}|g;" + done + + # now apply the sed expr + for i in "${FILESDIR}"/amanda-*; do + sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" || die + done + + if use minimal; then + cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 > "${T}"/amandahosts || die + else + sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \ + server-src/am{addclient,serverconfig}.pl || die + cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 > "${T}"/amandahosts || die + fi + + eapply_user +} + +src_configure() { + # fix bug #36316 + addpredict /var/cache/samba/gencache.tdb + # fix bug #376169 + addpredict /run/blkid + addpredict /etc/blkid.tab + + [[ ! -f ${TMPENVFILE} ]] && die "Variable setting file (${TMPENVFILE}) should exist!" + source "${TMPENVFILE}" + local myconf=() + + einfo "Using ${AMANDA_SERVER_TAPE} for tape server." + myconf+=( --with-tape-server="${AMANDA_SERVER_TAPE}" ) + einfo "Using ${AMANDA_SERVER_TAPE_DEVICE} for tape server." + myconf+=( --with-tape-device="${AMANDA_SERVER_TAPE_DEVICE}" ) + einfo "Using ${AMANDA_SERVER_INDEX} for index server." + myconf+=( --with-index-server="${AMANDA_SERVER_INDEX}" ) + einfo "Using ${AMANDA_USER_NAME} for amanda user." + myconf+=( --with-user="${AMANDA_USER_NAME}" ) + einfo "Using ${AMANDA_GROUP_NAME} for amanda group." + myconf+=( --with-group="${AMANDA_GROUP_NAME}" ) + einfo "Using ${AMANDA_TAR} as Tar implementation." + myconf+=( --with-gnutar="${AMANDA_TAR}" ) + einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir." + myconf+=( --with-gnutar-listdir="${AMANDA_TAR_LISTDIR}" ) + einfo "Using ${AMANDA_CONFIG_NAME} as default config name." + myconf+=( --with-config="${AMANDA_CONFIG_NAME}" ) + einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory." + myconf+=( --with-tmpdir="${AMANDA_TMPDIR}" ) + + if [[ -n ${AMANDA_PORTS_UDP} && -n ${AMANDA_PORTS_TCP} && -z ${AMANDA_PORTS_BOTH} ]]; then + eerror "If you want _both_ UDP and TCP ports, please use only the" + eerror "AMANDA_PORTS environment variable for identical ports, or set" + eerror "AMANDA_PORTS_BOTH." + die "Bad port setup!" + fi + if [[ -n ${AMANDA_PORTS_UDP} ]]; then + einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}" + myconf+=( --with-udpportrange="${AMANDA_PORTS_UDP}" ) + fi + if [[ -n ${AMANDA_PORTS_TCP} ]]; then + einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}" + myconf+=( --with-tcpportrange="${AMANDA_PORTS_TCP}" ) + fi + if [[ -n ${AMANDA_PORTS} ]]; then + einfo "Using ports ${AMANDA_PORTS/,/-}" + myconf+=( --with-portrange="${AMANDA_PORTS}" ) + fi + + # Extras + # Speed option + myconf+=( --with-buffered-dump ) + # "debugging" in the configuration is NOT debug in the conventional sense. + # It is actually just useful output in the application, and should remain + # enabled. There are some cases of breakage with MTX tape changers as of + # 2.5.1p2 that it exposes when turned off as well. + myconf+=( --with-debugging ) + # Where to put our files + myconf+=( --localstatedir="${AMANDA_USER_HOMEDIR}" ) + + # Samba support + myconf+=( $(use_with samba smbclient /usr/bin/smbclient) ) + + # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by + # default + myconf+=( --with-bsd-security ) + myconf+=( --with-ssh-security ) + myconf+=( --with-bsdudp-security ) + myconf+=( --with-bsdtcp-security ) + + # kerberos-security mechanism version 5 + myconf+=( $(use_with kerberos krb5-security) ) + + # Amazon S3 support + myconf+=( $(use_enable s3 s3-device) ) + + # libcurl is required for S3 but otherwise optional + if ! use s3; then + myconf+=( $(use_with curl libcurl) ) + fi + + # Client only, as requested in bug #127725 + if use minimal; then + myconf+=( --without-server ) + else + # amplot + myconf+=( $(use_with gnuplot) ) + fi + + # IPv6 fun. + myconf+=( $(use_with ipv6) ) + # This is to prevent the IPv6-is-working test + # As the test fails on binpkg build hosts with no IPv6. + use ipv6 && export amanda_cv_working_ipv6=yes + + # I18N + myconf+=( $(use_enable nls) ) + + # Bug #296634: Perl location + perl_set_version + myconf+=( --with-amperldir="${VENDOR_LIB}" ) + + # Bug 296633: --disable-syntax-checks + # Some tests are not safe for production systems + myconf+=( --disable-syntax-checks ) + + # build manpages + myconf+=( --enable-manpage-build ) + + # Bug #636262 + myconf+=( $(use_with ndmp ndmp) ) + + # bug #483120 + tc-export AR + + econf \ + --disable-static \ + $(use_with readline) \ + "${myconf[@]}" +} + +src_compile() { + # Again, do not want the perl-module src_compile + default +} + +# We do not want the perl-module tests. +src_test() { + default +} + +# We have had reports of amanda file permissions getting screwed up. +# Losing setuid, becoming too lax etc. +# ONLY root and users in the amanda group should be able to run these binaries! +amanda_permissions_fix() { + local root="$1" + [[ -z ${root} ]] && die "Failed to pass root argument to amanda_permissions_fix!" + local i le=/usr/libexec/amanda + for i in "${le}"/calcsize "${le}"/killpgrp "${le}"/rundump "${le}"/runtar; do + [[ -e ${root}/${i} ]] || continue + chown root:${AMANDA_GROUP_NAME} "${root}"/${i} || die + chmod u=srwx,g=rx,o= "${root}"/${i} || die + done + + # amanda-security.conf is a config file with similar requirements: + # writable only by root + # world-readable + # 3.3.9: introduced in /etc/amanda-security.conf + # 3.4.2: moved to /etc/amanda/amanda-security.conf + f=/etc/amanda/amanda-security.conf + chown root:root "${root}""${f}" || die + chmod u=rw,go=r "${root}""${f}" || die +} + +src_install() { + [[ ! -f ${TMPENVFILE} ]] && die "Variable setting file (${TMPENVFILE}) should exist!" + source ${TMPENVFILE} + + einfo "Doing stock install" + emake DESTDIR="${D}" install + + # Build the envdir file + # Don't forget this.. + einfo "Installing environment config file" + newenvd - "${ENVDFILE}" <<- _EOF_ + # These settings are what was present in the environment when this + # Amanda was compiled. Changing anything below this comment will + # have no effect on your application, but it merely exists to + # preserve them for your next emerge of Amanda + $(cat "${TMPENVFILE}" | sed "s,=\$,='',g") + _EOF_ + + einfo "Installing systemd service and socket files for Amanda" + systemd_dounit "${FILESDIR}"/amanda.socket + systemd_newunit "${FILESDIR}"/amanda.service 'amanda@.service' + + # Lock down next section (up until docs). + insopts -m0640 + # Installing Amanda Xinetd Services Definition + einfo "Installing xinetd service file" + insinto /etc/xinetd.d + if use minimal; then + newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda + else + newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda + fi + + if ! use minimal; then + einfo "Installing Sample Daily Cron Job for Amanda" + insinto /etc/cron.daily + newins "${MYFILESDIR}"/amanda-cron amanda + fi + + insinto /etc/amanda + einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user" + doins "${T}/amandahosts" + fperms 600 /etc/amanda/amandahosts + + dosym "${AMANDA_USER_HOMEDIR}/.amandahosts" /etc/amanda/amandahosts + insinto "${AMANDA_USER_HOMEDIR}" + einfo "Installing .profile for ${AMANDA_USER_NAME} user" + newins "${MYFILESDIR}"/amanda-profile .profile + + insinto /etc/amanda + doins example/amanda-client.conf + if ! use minimal; then + insinto "/etc/amanda/${AMANDA_CONFIG_NAME}" + doins example/amanda.conf + doins example/disklist + keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index" + fi + + keepdir "${AMANDA_TAR_LISTDIR}" + keepdir "${AMANDA_USER_HOMEDIR}/amanda" + keepdir "${AMANDA_TMPDIR}/dumps" + # Just make sure it exists for XFS to work... + use xfs && keepdir /var/xfsdump/inventory + + local i + for i in "${AMANDA_TMPDIR}" /etc/amanda; do + einfo "Securing directory (${i})" + fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i} + done + # Do NOT use -R + fperms 0700 \ + "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ + "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \ + "${AMANDA_USER_HOMEDIR}/amanda" \ + /etc/amanda + + if ! use minimal; then + fperms 0700 \ + "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \ + /etc/amanda/${AMANDA_CONFIG_NAME} + fi + + einfo "Setting setuid permissions" + amanda_permissions_fix "${ED}" + + # Relax permissions again + insopts -m0644 + + # docs + einfo "Installing documentation" + dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING + # our inetd sample + einfo "Installing standard inetd sample" + newdoc "${MYFILESDIR}"/amanda-inetd.amanda.sample-2.6.0_p2-r2 amanda-inetd.amanda.sample + # Amanda example configs + einfo "Installing example configurations" + rm "${ED}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} || die + mv "${ED}"/usr/share/amanda/example "${ED}"/usr/share/doc/${PF}/ || die + docinto example1 + newdoc "${FILESDIR}"/example_amanda.conf amanda.conf + newdoc "${FILESDIR}"/example_disklist-2.5.1_p3-r1 disklist + newdoc "${FILESDIR}"/example_global.conf global.conf + + einfo "Cleaning up dud .la files" + perl_set_version + + find "${ED}" -name '*.la' -delete || die +} + +pkg_postinst() { + [[ ! -f ${TMPENVFILE} && ${MERGE_TYPE} == "binary" ]] && TMPENVFILE="${EROOT}${ENVDIR}/${ENVDFILE}" + [[ ! -f ${TMPENVFILE} ]] && die "Variable setting file (${TMPENVFILE}) should exist!" + source "${TMPENVFILE}" + + # Migration of amandates from /etc to $localstatedir/amanda + if [[ -f ${EROOT}/etc/amandates && ! -f ${EROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates ]]; then + einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda" + einfo "A backup is also placed at /etc/amandates.orig" + cp -dp "${EROOT}"/etc/amandates "${EROOT}"/etc/amandates.orig || die + mkdir -p "${EROOT}/${AMANDA_USER_HOMEDIR}/amanda/" || die + cp -dp "${EROOT}"/etc/amandates "${EROOT}"/${AMANDA_USER_HOMEDIR}/amanda/amandates || die + fi + if [[ -f ${EROOT}/etc/amandates ]]; then + einfo "If you have migrated safely, please delete /etc/amandates" + fi + + einfo "Checking setuid permissions" + amanda_permissions_fix "${EROOT}"/ + + elog "You should configure Amanda in /etc/amanda now." + elog + elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda" + elog "and restart xinetd afterwards!" + elog + elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample" + elog "as an example of how to configure your inetd." + elog + elog "systemd-users: enable and start amanda.socket or the relevant services" + elog "regarding what auth method you use." + elog + elog "NOTICE: If you need raw access to partitions you need to add the" + elog "amanda user to the 'disk' group." + elog + elog "NOTICE: If you have a tape changer, you need to add the amanda user" + elog "to the 'tape' group." + elog + elog "If you use localhost in your disklist your restores may break." + elog "You should replace it with the actual hostname!" + elog "Please also see the syntax changes to amandahosts." + elog "The only exception is when you use the authentication method 'local'." + elog + elog "Please note that this package no longer explicitly depends on" + elog "virtual/inetd, as it supports modes where an inetd is not needed" + elog "(see bug #506028 for details)." +} |