Fixes misplaced PID and log files. Does _not_ fix SMP/parallel problems.

2 files changed, 152 insertions, 0 deletions

diff --git a/app-misc/lirc/files/digest-lirc-0.6.6-r1 b/app-misc/lirc/files/digest-lirc-0.6.6-r1
new file mode 100644
index 000000000000..255a2ae3f158
--- /dev/null
+++ b/app-misc/lirc/files/digest-lirc-0.6.6-r1
@@ -0,0 +1 @@
+MD5 6e7b5ba2fd479961d067730e16df7c54 lirc-0.6.6.tar.bz2 387447
diff --git a/app-misc/lirc/lirc-0.6.6-r1.ebuild b/app-misc/lirc/lirc-0.6.6-r1.ebuild
new file mode 100644
index 000000000000..572b3fce5feb
--- /dev/null
+++ b/app-misc/lirc/lirc-0.6.6-r1.ebuild
@@ -0,0 +1,151 @@
+# Copyright 1999-2003 Gentoo Technologies, Inc.
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lirc/lirc-0.6.6-r1.ebuild,v 1.1 2003/02/22 01:36:13 mkeadle Exp $
+
+inherit eutils
+
+DESCRIPTION="LIRC is a package that allows you to decode and send infra-red \
+	signals of many (but not all) commonly used remote controls."
+HOMEPAGE="http://www.lirc.org"
+
+[ "x${LIRC_OPTS}" = x ] && LIRC_OPTS="--with-driver=any \
+	--with-port=0x3f8 --with-irq=4"
+
+# We have a SMP enabled kernel?
+if [ ! -z "`uname -v | grep SMP`" ]
+then
+	export SMP=1
+else
+	export SMP=0
+fi
+
+# This are the defaults. With this support for all supported remotes
+# will be build.
+# If you want other options then set the Environment variable to your needs.
+
+# Note: If you don't specify the driver configure becomes interactiv.
+
+# You have to know, which driver you want;
+# --with-driver=X
+
+# where X is one of:
+# none, any, animax, avermedia, avermedia98,
+# bestbuy, bestbuy2, caraca, chronos, comX,
+# cph03x, cph06x, creative, fly98, flyvideo,
+# hauppauge,hauppauge_dvb, ipaq, irdeo,
+# irdeo_remote, irman, irreal, it87, knc_one,
+# logitech, lptX, mediafocusI, packard_bell,
+# parallel, pctv, pixelview_bt878,
+# pixelview_pak, pixelview_pro, provideo,
+# realmagic, remotemaster, serial, silitek,
+# sir, slinke, tekram, winfast_tv2000
+
+# This could be usefull too
+
+# --with-port=port	# port number for the lirc device.
+# --with-irq=irq	# irq line for the lirc device.
+# --with-timer=value	# timer value for the parallel driver
+# --with-tty=file	# tty to use (Irman, RemoteMaster, etc.)
+# --without-soft-carrier	# if your serial hw generates carrier
+# --with-transmitter	# if you use a transmitter diode
+
+SLOT="0"
+LICENSE="GPL-2"
+KEYWORDS="~x86"
+
+DEPEND="virtual/linux-sources"
+
+SRC_URI="mirror://sourceforge/lirc/${P}.tar.bz2"
+
+S=${WORKDIR}/${P}
+
+src_unpack() {
+	unpack ${P}.tar.bz2
+	cd ${S}
+	epatch ${FILESDIR}/${P}-gentoo.diff.bz2 || die
+	cp configure configure.orig
+	sed \
+		-e "s:-O2 -g:${CFLAGS}:" \
+		< configure.orig > configure
+	cp configure.in configure.in.orig
+	sed \
+		-e "s:-O2 -g:${CFLAGS}:" \
+		< configure.in.orig > configure.in
+}
+
+
+src_compile() {
+
+	#Let portage tell us where to put our modules
+	check_KV
+
+	./configure \
+		--host=${CHOST} \
+		--prefix=/usr \
+		--infodir=/usr/share/info \
+		--mandir=/usr/share/man \
+		--with-kerneldir="/usr/src/linux" \
+		--with-moduledir="/lib/modules/${KV}/misc" \
+		--disable-manage-devices \
+		${LIRC_OPTS} || die "./configure failed"
+
+	emake || die
+
+	case ${LIRC_OPTS}
+	in
+	  *"any"*)
+		if [ "${SMP}" = 1 ]; then    
+			# The parallel driver will not work with SMP kernels
+			# so we need to compile without it
+			emake -C drivers "SUBDIRS=lirc_dev lirc_serial \
+			lirc_sir lirc_it87 lirc_i2c lirc_gpio" || die
+		else
+			emake -C drivers "SUBDIRS=lirc_dev lirc_serial \
+			lirc_parallel lirc_sir lirc_it87 lirc_i2c \
+			lirc_gpio" || die
+		fi
+	;;
+	esac
+}
+
+src_install() {
+	make DESTDIR=${D} install || die
+
+	case ${LIRC_OPTS}
+	in
+	  *"any"*)
+		insinto /lib/modules/${KV}/misc
+		if [ "${SMP}" = 1 ]; then
+			for i in lirc_dev lirc_serial \
+				lirc_sir lirc_it87 lirc_i2c lirc_gpio
+			do
+			doins drivers/${i}/${i}.o
+			done
+		else
+			for i in lirc_dev lirc_serial \
+				lirc_parallel lirc_sir lirc_it87 lirc_i2c lirc_gpio
+			do
+			doins drivers/${i}/${i}.o
+			done
+		fi			
+	;;
+	esac
+
+	exeinto /etc/init.d
+	doexe ${FILESDIR}/lircd
+}
+
+pkg_postinst () {
+	/usr/sbin/update-modules
+
+	einfo
+	einfo "The lirc Linux Infrared Remote Control Package has been"
+	einfo "merged, please read the documentation, and if necessary"
+	einfo "add what is needed to /etc/modules.autoload or"
+	einfo "/etc/modules.d.  If you need special compile options"
+	einfo "then read the comments at the begin of this"
+	einfo "ebuild (source) and set the LIRC_OPTS environment"
+	einfo "variable to your needs."
+	einfo
+}
+