app-emulation/libvirt: quick stable init script fix

Talked with the arches about the fact that it was better to just mark
1.3.1-r1 stable to catch a fix for the init script.

Package-Manager: portage-2.2.26
Signed-off-by: Doug Goldstein <cardoe@gentoo.org>

2 files changed, 1 insertions, 386 deletions

diff --git a/app-emulation/libvirt/libvirt-1.3.1-r1.ebuild b/app-emulation/libvirt/libvirt-1.3.1-r1.ebuild
index 04ab3c97d01b..a41045352972 100644
--- a/app-emulation/libvirt/libvirt-1.3.1-r1.ebuild
+++ b/app-emulation/libvirt/libvirt-1.3.1-r1.ebuild
@@ -24,7 +24,7 @@ else
 	SRC_URI+=" ${BACKPORTS:+
 		https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
 		https://dev.gentoo.org/~tamiko/distfiles/${P}-${BACKPORTS}.tar.xz}"
-	KEYWORDS="~amd64 ~x86"
+	KEYWORDS="amd64 x86"
 	SLOT="0/${PV}"
 fi
 
diff --git a/app-emulation/libvirt/libvirt-1.3.1.ebuild b/app-emulation/libvirt/libvirt-1.3.1.ebuild
deleted file mode 100644
index de85da274e96..000000000000
--- a/app-emulation/libvirt/libvirt-1.3.1.ebuild
+++ /dev/null
@@ -1,385 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit eutils user autotools-utils linux-info systemd readme.gentoo
-
-BACKPORTS=""
-
-if [[ ${PV} = *9999* ]]; then
-	inherit git-r3
-	EGIT_REPO_URI="git://libvirt.org/libvirt.git"
-	SRC_URI=""
-	KEYWORDS=""
-	SLOT="0"
-else
-	# Versions with 4 numbers are stable updates:
-	if [[ ${PV} =~ ^[0-9]+(\.[0-9]+){3} ]]; then
-		SRC_URI="http://libvirt.org/sources/stable_updates/${P}.tar.gz"
-	else
-		SRC_URI="http://libvirt.org/sources/${P}.tar.gz"
-	fi
-	SRC_URI+=" ${BACKPORTS:+
-		https://dev.gentoo.org/~cardoe/distfiles/${P}-${BACKPORTS}.tar.xz
-		https://dev.gentoo.org/~tamiko/distfiles/${P}-${BACKPORTS}.tar.xz}"
-	KEYWORDS="amd64 x86"
-	SLOT="0/${PV}"
-fi
-
-DESCRIPTION="C toolkit to manipulate virtual machines"
-HOMEPAGE="http://www.libvirt.org/"
-LICENSE="LGPL-2.1"
-IUSE="apparmor audit avahi +caps firewalld fuse glusterfs iscsi +libvirtd lvm \
-	lxc +macvtap nfs nls numa openvz parted pcap phyp policykit +qemu rbd sasl \
-	selinux systemd +udev uml +vepa virtualbox virt-network wireshark-plugins \
-	xen"
-
-REQUIRED_USE="
-	firewalld? ( virt-network )
-	libvirtd? ( || ( lxc openvz qemu uml virtualbox xen ) )
-	lxc? ( caps libvirtd )
-	openvz? ( libvirtd )
-	qemu? ( libvirtd )
-	uml? ( libvirtd )
-	vepa? ( macvtap )
-	virt-network? ( libvirtd )
-	virtualbox? ( libvirtd )
-	xen? ( libvirtd )"
-
-# gettext.sh command is used by the libvirt command wrappers, and it's
-# non-optional, so put it into RDEPEND.
-# We can use both libnl:1.1 and libnl:3, but if you have both installed, the
-# package will use 3 by default. Since we don't have slot pinning in an API,
-# we must go with the most recent
-RDEPEND="
-	app-misc/scrub
-	dev-libs/libgcrypt:0
-	dev-libs/libnl:3
-	>=dev-libs/libxml2-2.7.6
-	>=net-analyzer/netcat6-1.0-r2
-	>=net-libs/gnutls-1.0.25
-	net-libs/libssh2
-	>=net-misc/curl-7.18.0
-	sys-apps/dmidecode
-	>=sys-apps/util-linux-2.17
-	sys-devel/gettext
-	sys-libs/ncurses:0=
-	sys-libs/readline:=
-	apparmor? ( sys-libs/libapparmor )
-	audit? ( sys-process/audit )
-	avahi? ( >=net-dns/avahi-0.6[dbus] )
-	caps? ( sys-libs/libcap-ng )
-	firewalld? ( net-firewall/firewalld )
-	fuse? ( >=sys-fs/fuse-2.8.6 )
-	glusterfs? ( >=sys-cluster/glusterfs-3.4.1 )
-	iscsi? ( sys-block/open-iscsi )
-	lvm? ( >=sys-fs/lvm2-2.02.48-r2 )
-	lxc? ( !systemd? ( sys-power/pm-utils ) )
-	nfs? ( net-fs/nfs-utils )
-	numa? (
-		>sys-process/numactl-2.0.2
-		sys-process/numad
-	)
-	openvz? ( sys-kernel/openvz-sources:* )
-	parted? (
-		>=sys-block/parted-1.8[device-mapper]
-		sys-fs/lvm2
-	)
-	pcap? ( >=net-libs/libpcap-1.0.0 )
-	policykit? ( >=sys-auth/polkit-0.9 )
-	qemu? (
-		>=app-emulation/qemu-0.13.0
-		dev-libs/yajl
-		!systemd? ( sys-power/pm-utils )
-	)
-	rbd? ( sys-cluster/ceph )
-	sasl? ( dev-libs/cyrus-sasl )
-	selinux? ( >=sys-libs/libselinux-2.0.85 )
-	systemd? ( sys-apps/systemd )
-	virt-network? (
-		net-dns/dnsmasq[script]
-		net-firewall/ebtables
-		>=net-firewall/iptables-1.4.10[ipv6]
-		net-misc/radvd
-		sys-apps/iproute2[-minimal]
-	)
-	virtualbox? ( || ( app-emulation/virtualbox >=app-emulation/virtualbox-bin-2.2.0 ) )
-	wireshark-plugins? ( net-analyzer/wireshark:= )
-	xen? (
-		app-emulation/xen
-		app-emulation/xen-tools:=
-	)
-	udev? (
-		virtual/udev
-		>=x11-libs/libpciaccess-0.10.9
-	)"
-
-DEPEND="${RDEPEND}
-	app-text/xhtml1
-	dev-lang/perl
-	dev-libs/libxslt
-	dev-perl/XML-XPath
-	virtual/pkgconfig"
-
-pkg_setup() {
-	enewgroup qemu 77
-	enewuser qemu 77 -1 -1 qemu kvm
-
-	# Some people used the masked ebuild which was not adding the qemu
-	# user to the kvm group originally. This results in VMs failing to
-	# start for some users. bug #430808
-	egetent group kvm | grep -q qemu
-	if [[ $? -ne 0 ]]; then
-		gpasswd -a qemu kvm
-	fi
-
-	# Check kernel configuration:
-	CONFIG_CHECK=""
-	use fuse && CONFIG_CHECK+="
-		~FUSE_FS"
-
-	use lvm && CONFIG_CHECK+="
-		~BLK_DEV_DM
-		~DM_MULTIPATH
-		~DM_SNAPSHOT"
-
-	use lxc && CONFIG_CHECK+="
-		~BLK_CGROUP
-		~CGROUP_CPUACCT
-		~CGROUP_DEVICE
-		~CGROUP_FREEZER
-		~CGROUP_NET_PRIO
-		~CGROUP_PERF
-		~CGROUPS
-		~CGROUP_SCHED
-		~CPUSETS
-		~DEVPTS_MULTIPLE_INSTANCES
-		~IPC_NS
-		~MACVLAN
-		~NAMESPACES
-		~NET_CLS_CGROUP
-		~NET_NS
-		~PID_NS
-		~POSIX_MQUEUE
-		~SECURITYFS
-		~USER_NS
-		~UTS_NS
-		~VETH
-		~!GRKERNSEC_CHROOT_MOUNT
-		~!GRKERNSEC_CHROOT_DOUBLE
-		~!GRKERNSEC_CHROOT_PIVOT
-		~!GRKERNSEC_CHROOT_CHMOD
-		~!GRKERNSEC_CHROOT_CAPS"
-	# Handle specific kernel versions for different features
-	kernel_is lt 3 6 && CONFIG_CHECK+=" ~CGROUP_MEM_RES_CTLR"
-	kernel_is ge 3 6 && CONFIG_CHECK+=" ~MEMCG ~MEMCG_SWAP ~MEMCG_KMEM"
-
-	use macvtap && CONFIG_CHECK+="
-		~MACVTAP"
-
-	use virt-network && CONFIG_CHECK+="
-		~BRIDGE_EBT_MARK_T
-		~BRIDGE_NF_EBTABLES
-		~NETFILTER_ADVANCED
-		~NETFILTER_XT_CONNMARK
-		~NETFILTER_XT_MARK
-		~NETFILTER_XT_TARGET_CHECKSUM"
-	# Bandwidth Limiting Support
-	use virt-network && CONFIG_CHECK+="
-		~BRIDGE_EBT_T_NAT
-		~NET_ACT_POLICE
-		~NET_CLS_FW
-		~NET_CLS_U32
-		~NET_SCH_HTB
-		~NET_SCH_INGRESS
-		~NET_SCH_SFQ"
-
-	ERROR_USER_NS="Optional depending on LXC configuration."
-
-	if [[ -n ${CONFIG_CHECK} ]]; then
-		linux-info_pkg_setup
-	fi
-}
-
-src_prepare() {
-	touch "${S}/.mailmap"
-
-	if [[ ${PV} = *9999* ]]; then
-		# git checkouts require bootstrapping to create the configure script.
-		# Additionally the submodules must be cloned to the right locations
-		# bug #377279
-		./bootstrap || die "bootstrap failed"
-		(
-			git submodule status | sed 's/^[ +-]//;s/ .*//'
-			git hash-object bootstrap.conf
-		) >.git-module-status
-	fi
-
-	epatch \
-		"${FILESDIR}"/${PN}-1.3.0-do_not_use_sysconf.patch \
-		"${FILESDIR}"/${PN}-1.2.16-fix_paths_in_libvirt-guests_sh.patch \
-		"${FILESDIR}"/${P}-fix_paths_for_apparmor.patch \
-		"${FILESDIR}"/${PN}-1.2.21-avoid_deprecated_pc_file.patch
-
-	[[ -n ${BACKPORTS} ]] &&
-		EPATCH_FORCE=yes EPATCH_SUFFIX="patch" \
-			EPATCH_SOURCE="${WORKDIR}/patches" epatch
-
-	epatch_user
-
-	# Tweak the init script:
-	cp "${FILESDIR}/libvirtd.init-r16" "${S}/libvirtd.init" || die
-	sed -e "s/USE_FLAG_FIREWALLD/$(usex firewalld 'need firewalld' '')/" \
-		-e "s/USE_FLAG_AVAHI/$(usex avahi 'use avahi-daemon' '')/" \
-		-e "s/USE_FLAG_ISCSI/$(usex iscsi 'use iscsid' '')/" \
-		-e "s/USE_FLAG_RBD/$(usex rbd 'use ceph' '')/" \
-		-i "${S}/libvirtd.init" || die "sed failed"
-
-	AUTOTOOLS_AUTORECONF=true
-	autotools-utils_src_prepare
-}
-
-src_configure() {
-	local myeconfargs=(
-		$(use_with apparmor)
-		$(use_with apparmor apparmor-profiles)
-		$(use_with audit)
-		$(use_with avahi)
-		$(use_with caps capng)
-		$(use_with firewalld)
-		$(use_with fuse)
-		$(use_with glusterfs)
-		$(use_with glusterfs storage-gluster)
-		$(use_with iscsi storage-iscsi)
-		$(use_with libvirtd)
-		$(use_with lvm storage-lvm)
-		$(use_with lvm storage-mpath)
-		$(use_with lxc)
-		$(use_with macvtap)
-		$(use_enable nls)
-		$(use_with numa numactl)
-		$(use_with numa numad)
-		$(use_with openvz)
-		$(use_with parted storage-disk)
-		$(use_with pcap libpcap)
-		$(use_with phyp)
-		$(use_with policykit polkit)
-		$(use_with qemu)
-		$(use_with qemu yajl)
-		$(use_with rbd storage-rbd)
-		$(use_with sasl)
-		$(use_with selinux)
-		$(use_with systemd systemd-daemon)
-		$(usex systemd --with-init-script=systemd '')
-		$(use_with udev)
-		$(use_with uml)
-		$(use_with vepa virtualport)
-		$(use_with virt-network network)
-		$(use_with wireshark-plugins wireshark-dissector)
-		$(use_with xen)
-		$(use_with xen xen-inotify)
-		$(usex xen --with-libxl '')
-
-		--without-hal
-		--without-netcf
-		--without-sanlock
-		--without-xenapi
-		--with-esx
-		--with-qemu-group=$(usex caps qemu root)
-		--with-qemu-user=$(usex caps qemu root)
-		--with-remote
-		--with-storage-fs
-		--with-vmware
-
-		--disable-static
-		--disable-werror
-
-		--with-html-subdir=${PF}/html
-		--localstatedir=/var
-	)
-
-	if use virtualbox && has_version app-emulation/virtualbox-ose; then
-		myeconfargs+=( --with-vbox=/usr/lib/virtualbox-ose/ )
-	else
-		myeconfargs+=( $(use_with virtualbox vbox) )
-	fi
-
-	autotools-utils_src_configure
-
-	if [[ ${PV} = *9999* ]]; then
-		# Restore gnulib's config.sub and config.guess
-		# bug #377279
-		(cd .gnulib && git reset --hard > /dev/null)
-	fi
-
-	# Workaround: Sometimes this subdirectory is missing and leads to a
-	# build failure.
-	mkdir -p "${BUILD_DIR}"/docs/internals
-}
-
-src_test() {
-	# Explicitly allow parallel build of tests
-	export VIR_TEST_DEBUG=1
-	HOME="${T}" emake check || die "tests failed"
-}
-
-src_install() {
-	autotools-utils_src_compile install \
-		DESTDIR="${D}" \
-		SYSTEMD_UNIT_DIR="$(systemd_get_unitdir)"
-
-	find "${D}" -name '*.la' -delete || die
-
-	# Remove bogus, empty directories. They are either not used, or
-	# libvirtd is able to create them on demand
-	rm -rf "${D}"/etc/sysconfig
-	rm -rf "${D}"/var/cache
-	rm -rf "${D}"/var/run
-	rm -rf "${D}"/var/log
-
-	use libvirtd || return 0
-	# From here, only libvirtd-related instructions, be warned!
-
-	use systemd && systemd_install_serviced \
-		"${FILESDIR}"/libvirtd.service.conf libvirtd.service
-
-	systemd_newtmpfilesd "${FILESDIR}"/libvirtd.tmpfiles.conf libvirtd.conf
-
-	newinitd "${S}/libvirtd.init" libvirtd || die
-	newinitd "${FILESDIR}/libvirt-guests.init-r1" libvirt-guests || die
-	newinitd "${FILESDIR}/virtlockd.init-r1" virtlockd || die
-	newinitd "${FILESDIR}/virtlogd.init-r1" virtlogd || die
-
-	newconfd "${FILESDIR}/libvirtd.confd-r5" libvirtd || die
-	newconfd "${FILESDIR}/libvirt-guests.confd" libvirt-guests || die
-
-	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
-	DISABLE_AUTOFORMATTING=true
-	readme.gentoo_create_doc
-}
-
-pkg_preinst() {
-	# we only ever want to generate this once
-	if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
-		rm -rf "${D}"/etc/libvirt/qemu/networks/default.xml
-	fi
-}
-
-pkg_postinst() {
-	if [[ -e "${ROOT}"/etc/libvirt/qemu/networks/default.xml ]]; then
-		touch "${ROOT}"/etc/libvirt/qemu/networks/default.xml
-	fi
-
-	use libvirtd || return 0
-	# From here, only libvirtd-related instructions, be warned!
-
-	if [[ -n ${REPLACING_VERSIONS} ]] && ! version_is_at_least 1.2.18-r2 ${REPLACING_VERSIONS} ]]; then
-		FORCE_PRINT_ELOG=true
-	fi
-
-	DOC_CONTENTS=$(<"${FILESDIR}/README.gentoo-r1")
-	DISABLE_AUTOFORMATTING=true
-	readme.gentoo_print_elog
-}