profiles: deprecate arm 17.0 profiles

Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>

43 files changed, 4472 insertions, 0 deletions

diff --git a/profiles/default/linux/arm/17.0/armv4/deprecated b/profiles/default/linux/arm/17.0/armv4/deprecated
new file mode 100644
index 000000000000..45b5c52341c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4/desktop/deprecated b/profiles/default/linux/arm/17.0/armv4/desktop/deprecated
new file mode 100644
index 000000000000..45b5c52341c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4/desktop/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4/desktop/gnome/deprecated b/profiles/default/linux/arm/17.0/armv4/desktop/gnome/deprecated
new file mode 100644
index 000000000000..45b5c52341c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4/desktop/gnome/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4/desktop/plasma/deprecated b/profiles/default/linux/arm/17.0/armv4/desktop/plasma/deprecated
new file mode 100644
index 000000000000..45b5c52341c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4/desktop/plasma/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4/developer/deprecated b/profiles/default/linux/arm/17.0/armv4/developer/deprecated
new file mode 100644
index 000000000000..45b5c52341c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4/developer/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4t/deprecated b/profiles/default/linux/arm/17.0/armv4t/deprecated
new file mode 100644
index 000000000000..97e893728d18
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4t/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4t
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4t/desktop/deprecated b/profiles/default/linux/arm/17.0/armv4t/desktop/deprecated
new file mode 100644
index 000000000000..97e893728d18
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4t/desktop/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4t
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4t/desktop/gnome/deprecated b/profiles/default/linux/arm/17.0/armv4t/desktop/gnome/deprecated
new file mode 100644
index 000000000000..97e893728d18
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4t/desktop/gnome/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4t
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4t/desktop/plasma/deprecated b/profiles/default/linux/arm/17.0/armv4t/desktop/plasma/deprecated
new file mode 100644
index 000000000000..97e893728d18
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4t/desktop/plasma/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4t
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4t/developer/deprecated b/profiles/default/linux/arm/17.0/armv4t/developer/deprecated
new file mode 100644
index 000000000000..97e893728d18
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4t/developer/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv4t
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv4t/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/armv4t/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..39e9ddab5c5d
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv4t/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/armv4t/systemd
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv5te/deprecated b/profiles/default/linux/arm/17.0/armv5te/deprecated
new file mode 100644
index 000000000000..021c24a339ac
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv5te/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv5te
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv5te/desktop/deprecated b/profiles/default/linux/arm/17.0/armv5te/desktop/deprecated
new file mode 100644
index 000000000000..021c24a339ac
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv5te/desktop/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv5te
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv5te/desktop/gnome/deprecated b/profiles/default/linux/arm/17.0/armv5te/desktop/gnome/deprecated
new file mode 100644
index 000000000000..021c24a339ac
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv5te/desktop/gnome/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv5te
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv5te/desktop/plasma/deprecated b/profiles/default/linux/arm/17.0/armv5te/desktop/plasma/deprecated
new file mode 100644
index 000000000000..021c24a339ac
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv5te/desktop/plasma/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv5te
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv5te/developer/deprecated b/profiles/default/linux/arm/17.0/armv5te/developer/deprecated
new file mode 100644
index 000000000000..021c24a339ac
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv5te/developer/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/armv5te
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv5te/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/armv5te/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..7721e0101edb
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv5te/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/armv5te/systemd
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/deprecated b/profiles/default/linux/arm/17.0/armv6j/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/desktop/deprecated b/profiles/default/linux/arm/17.0/armv6j/desktop/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/desktop/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/desktop/gnome/deprecated b/profiles/default/linux/arm/17.0/armv6j/desktop/gnome/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/desktop/gnome/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/desktop/plasma/deprecated b/profiles/default/linux/arm/17.0/armv6j/desktop/plasma/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/desktop/plasma/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/developer/deprecated b/profiles/default/linux/arm/17.0/armv6j/developer/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/developer/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/hardened/deprecated b/profiles/default/linux/arm/17.0/armv6j/hardened/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/hardened/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/hardened/selinux/deprecated b/profiles/default/linux/arm/17.0/armv6j/hardened/selinux/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/hardened/selinux/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/selinux/deprecated b/profiles/default/linux/arm/17.0/armv6j/selinux/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/selinux/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv6j/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/armv6j/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv6j/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/deprecated b/profiles/default/linux/arm/17.0/armv7a/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/desktop/deprecated b/profiles/default/linux/arm/17.0/armv7a/desktop/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/desktop/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/desktop/gnome/deprecated b/profiles/default/linux/arm/17.0/armv7a/desktop/gnome/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/desktop/gnome/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/armv7a/desktop/gnome/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/desktop/gnome/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/desktop/plasma/deprecated b/profiles/default/linux/arm/17.0/armv7a/desktop/plasma/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/desktop/plasma/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/desktop/plasma/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/armv7a/desktop/plasma/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/desktop/plasma/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/developer/deprecated b/profiles/default/linux/arm/17.0/armv7a/developer/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/developer/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/hardened/deprecated b/profiles/default/linux/arm/17.0/armv7a/hardened/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/hardened/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/hardened/selinux/deprecated b/profiles/default/linux/arm/17.0/armv7a/hardened/selinux/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/hardened/selinux/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/armv7a/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/armv7a/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..063fe9af04c0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/armv7a/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/deprecated b/profiles/default/linux/arm/17.0/deprecated
new file mode 100644
index 000000000000..ebd06e20749f
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/desktop/deprecated b/profiles/default/linux/arm/17.0/desktop/deprecated
new file mode 100644
index 000000000000..b65e6c8df8d5
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/desktop/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/desktop
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/desktop/gnome/deprecated b/profiles/default/linux/arm/17.0/desktop/gnome/deprecated
new file mode 100644
index 000000000000..51ad785cb389
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/desktop/gnome/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/desktop/gnome
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/desktop/gnome/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/desktop/gnome/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..e79024de0325
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/desktop/gnome/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/desktop/gnome/systemd
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/desktop/plasma/deprecated b/profiles/default/linux/arm/17.0/desktop/plasma/deprecated
new file mode 100644
index 000000000000..4e44c2757acc
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/desktop/plasma/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr/desktop/plasma
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/desktop/plasma/systemd/merged-usr/deprecated b/profiles/default/linux/arm/17.0/desktop/plasma/systemd/merged-usr/deprecated
new file mode 100644
index 000000000000..df5a51661dd0
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/desktop/plasma/systemd/merged-usr/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/desktop/plasma/systemd
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work
diff --git a/profiles/default/linux/arm/17.0/developer/deprecated b/profiles/default/linux/arm/17.0/developer/deprecated
new file mode 100644
index 000000000000..ebd06e20749f
--- /dev/null
+++ b/profiles/default/linux/arm/17.0/developer/deprecated
@@ -0,0 +1,104 @@
+default/linux/arm/23.0/split-usr
+
+A profile upgrade to version 23.0 is available for your architecture.
+The new 23.0 profiles enable some toolchain hardening features and 
+performance enhancements by default, and standardize settings.
+You can find the list of changes on the wiki tracking page [1].
+
+Upgrade instructions
+
+Note 1: If you have manually changed your CHOST to a value different from 
+what the stages and profiles set, you may have to do that in the future too.
+In that case you should know what you are doing, hopefully; please read the 
+instructions with a critical eye then.
+
+Note 2: In case you are already familiar with binary packages, you should be
+able to add "--getbinpkg" to the emerge calls to speed things up.
+The use of binary packages is completely optional though, and also not
+as much tested as the source-based upgrade path yet.
+
+1. Ensure your system backups are up to date. Please also update
+   your system fully and depclean before proceeding.
+   glibc older than 2.36 and musl older than 1.2.4 is not supported anymore.
+
+2. If you are still using one of the long-deprecated amd64 17.0 profiles 
+   (other than x32 or musl), then first complete the migration to the 
+   corresponding 17.1 profile. Instructions can be found at [3].
+   
+3. If you are currently using systemd in a split-usr configuration, then first 
+   complete the migration to the corresponding merged-usr profile of the 
+   same profile version. Details on how to do this can be found in the news 
+   item [4].
+   If you are currently using openrc, migrate to 23.0 first, keeping your disk
+   layout. If you want to move from split-usr to merged-usr, do that afterwards.
+
+4. Run "emerge --info" and note down the value of the CHOST variable.
+
+5. Edit /etc/portage/make.conf; if there is a line defining the CHOST variable,
+   remove it. Also delete all lines defining CHOST_... variables.
+
+6. Select the 23.0 profile corresponding to your current profile, either using
+   "eselect profile" or by manually setting the profile symlink.
+   Note that old profiles are by default split-usr and the 23.0 profiles by
+   default merged-usr. Do NOT change directory scheme now, since this will
+   mess up your system! 
+   Instead, make sure that the new profile has the same property: for example, 
+   OLD default/linux/amd64/17.1  
+        ==>  NEW default/linux/amd64/23.0/split-usr
+             (added "split-usr")
+   OLD default/linux/amd64/17.1/systemd/merged-usr  
+        ==>  NEW default/linux/amd64/23.0/systemd
+             (removed "merged-usr")
+   A detailed table of the upgrade paths can be found at [5]. Please consult it.
+   In some cases (hppa, x86) the table will tell you to pick between two choices. 
+   What you need should be obvious from your *old* CHOST value (from step 4).
+
+7. Delete the contents of your binary package cache at ${PKGDIR}
+     rm -r /var/cache/binpkgs/*
+
+8. In the file or directory /etc/portage/binrepos.conf (if existing), update
+   the URI in all configuration such that they point to 23.0 profile binhost 
+   directories. The exact paths can be found in the table at [5], too.
+
+9. Rebuild or reinstall from binary (if available) the following packages in
+   this order, with the same version as already active:
+     emerge --ask --oneshot sys-devel/binutils
+   (you may have to run binutils-config and re-select your binutils now)
+     emerge --ask --oneshot sys-devel/gcc
+   (IMPORTANT: If this command wants to rebuild glibc first, do *not* let it do 
+    that; instead, abort and try again with --nodeps added to the command line.)
+   (you may have to run gcc-config and re-select your gcc now)
+   and the C library, i.e. for glibc-based systems
+     emerge --ask --oneshot sys-libs/glibc
+   or for musl-based systems
+     emerge --ask --oneshot sys-libs/musl
+
+10. Re-run "emerge --info" and check if CHOST has changed compared to step 4.
+
+If the CHOST has NOT changed, skip to step 13 (env-update). Otherwise, 
+
+11. Recheck with binutils-config and gcc-config that valid installed versions
+   of binutils and gcc are selected.
+
+12. Check /etc/env.d, /etc/env.d/binutils, and /etc/env.d/gcc for files that
+   refer to the *OLD* CHOST value, and remove them. 
+   Examples how to do this can be found in the similar procedure at [6].
+
+13. Run env-update && source /etc/profile
+
+14. Re-emerge libtool:
+   emerge --ask --oneshot libtool
+
+15. Just for safety, delete the contents of your binary package cache at 
+    ${PKGDIR} again:
+     rm -r /var/cache/binpkgs/*
+
+16. Rebuild world:
+   emerge --ask --emptytree @world
+
+[1] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_transition
+[2] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_profile_timeline
+[3] https://www.gentoo.org/support/news-items/2019-06-05-amd64-17-1-profiles-are-now-stable.html
+[4] https://www.gentoo.org/support/news-items/2022-12-01-systemd-usrmerge.html
+[5] https://wiki.gentoo.org/wiki/Project:Toolchain/23.0_update_table
+[6] https://wiki.gentoo.org/wiki/Changing_the_CHOST_variable#Verifying_things_work