sys-kernel/linux-firmware: drop 20230310

Signed-off-by: Mike Pagano <mpagano@gentoo.org>

1 files changed, 0 insertions, 373 deletions

diff --git a/sys-kernel/linux-firmware/linux-firmware-20230310.ebuild b/sys-kernel/linux-firmware/linux-firmware-20230310.ebuild
deleted file mode 100644
index 6eb5ade58607..000000000000
--- a/sys-kernel/linux-firmware/linux-firmware-20230310.ebuild
+++ /dev/null
@@ -1,373 +0,0 @@
-# Copyright 1999-2023 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-inherit linux-info mount-boot savedconfig multiprocessing
-
-# In case this is a real snapshot, fill in commit below.
-# For normal, tagged releases, leave blank
-MY_COMMIT=""
-
-if [[ ${PV} == 99999999* ]]; then
-	inherit git-r3
-	EGIT_REPO_URI="https://git.kernel.org/pub/scm/linux/kernel/git/firmware/${PN}.git"
-else
-	if [[ -n "${MY_COMMIT}" ]]; then
-		SRC_URI="https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/snapshot/${MY_COMMIT}.tar.gz -> ${P}.tar.gz"
-		S="${WORKDIR}/${MY_COMMIT}"
-	else
-		SRC_URI="https://mirrors.edge.kernel.org/pub/linux/kernel/firmware/${P}.tar.xz"
-	fi
-
-	KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86"
-fi
-
-DESCRIPTION="Linux firmware files"
-HOMEPAGE="https://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git"
-
-LICENSE="GPL-2 GPL-2+ GPL-3 BSD MIT || ( MPL-1.1 GPL-2 )
-	redistributable? ( linux-fw-redistributable BSD-2 BSD BSD-4 ISC MIT )
-	unknown-license? ( all-rights-reserved )"
-SLOT="0"
-IUSE="compress initramfs +redistributable savedconfig unknown-license"
-REQUIRED_USE="initramfs? ( redistributable )"
-
-RESTRICT="binchecks strip test
-	unknown-license? ( bindist )"
-
-BDEPEND="initramfs? ( app-arch/cpio )"
-
-#add anything else that collides to this
-RDEPEND="!savedconfig? (
-		redistributable? (
-			!sys-firmware/alsa-firmware[alsa_cards_ca0132]
-			!sys-block/qla-fc-firmware
-			!sys-firmware/iwl1000-ucode
-			!sys-firmware/iwl6005-ucode
-			!sys-firmware/iwl6030-ucode
-			!sys-firmware/iwl3160-ucode
-			!sys-firmware/iwl7260-ucode
-			!sys-firmware/iwl3160-7260-bt-ucode
-			!sys-firmware/raspberrypi-wifi-ucode
-		)
-		unknown-license? (
-			!sys-firmware/alsa-firmware[alsa_cards_korg1212]
-			!sys-firmware/alsa-firmware[alsa_cards_maestro3]
-			!sys-firmware/alsa-firmware[alsa_cards_sb16]
-			!sys-firmware/alsa-firmware[alsa_cards_ymfpci]
-		)
-	)"
-
-QA_PREBUILT="*"
-
-pkg_setup() {
-	if ! use compress ; then
-		return
-	fi
-
-	local CONFIG_CHECK="~FW_LOADER_COMPRESS"
-	linux-info_pkg_setup
-}
-
-pkg_pretend() {
-	use initramfs && mount-boot_pkg_pretend
-}
-
-src_unpack() {
-	if [[ ${PV} == 99999999* ]]; then
-		git-r3_src_unpack
-	else
-		default
-		# rename directory from git snapshot tarball
-		if [[ ${#GIT_COMMIT} -gt 8 ]]; then
-			mv ${PN}-*/ ${P} || die
-		fi
-	fi
-}
-
-src_prepare() {
-	default
-
-	find . -type f -not -perm 0644 -print0 \
-		| xargs --null --no-run-if-empty chmod 0644 \
-		|| die
-
-	chmod +x copy-firmware.sh || die
-
-	if use initramfs; then
-		if [[ -d "${S}/amd-ucode" ]]; then
-			local UCODETMP="${T}/ucode_tmp"
-			local UCODEDIR="${UCODETMP}/kernel/x86/microcode"
-			mkdir -p "${UCODEDIR}" || die
-			echo 1 > "${UCODETMP}/early_cpio"
-
-			local amd_ucode_file="${UCODEDIR}/AuthenticAMD.bin"
-			cat "${S}"/amd-ucode/*.bin > "${amd_ucode_file}" || die "Failed to concat amd cpu ucode"
-
-			if [[ ! -s "${amd_ucode_file}" ]]; then
-				die "Sanity check failed: '${amd_ucode_file}' is empty!"
-			fi
-
-			pushd "${UCODETMP}" &>/dev/null || die
-			find . -print0 | cpio --quiet --null -o -H newc -R 0:0 > "${S}"/amd-uc.img
-			popd &>/dev/null || die
-			if [[ ! -s "${S}/amd-uc.img" ]]; then
-				die "Failed to create '${S}/amd-uc.img'!"
-			fi
-		else
-			# If this will ever happen something has changed which
-			# must be reviewed
-			die "'${S}/amd-ucode' not found!"
-		fi
-	fi
-
-	# whitelist of misc files
-	local misc_files=(
-		copy-firmware.sh
-		WHENCE
-		README
-	)
-
-	# whitelist of images with a free software license
-	local free_software=(
-		# keyspan_pda (GPL-2+)
-		keyspan_pda/keyspan_pda.fw
-		keyspan_pda/xircom_pgs.fw
-		# dsp56k (GPL-2+)
-		dsp56k/bootstrap.bin
-		# ath9k_htc (BSD GPL-2+ MIT)
-		ath9k_htc/htc_7010-1.4.0.fw
-		ath9k_htc/htc_9271-1.4.0.fw
-		# pcnet_cs, 3c589_cs, 3c574_cs, serial_cs (dual GPL-2/MPL-1.1)
-		cis/LA-PCM.cis
-		cis/PCMLM28.cis
-		cis/DP83903.cis
-		cis/NE2K.cis
-		cis/tamarack.cis
-		cis/PE-200.cis
-		cis/PE520.cis
-		cis/3CXEM556.cis
-		cis/3CCFEM556.cis
-		cis/MT5634ZLX.cis
-		cis/RS-COM-2P.cis
-		cis/COMpad2.cis
-		cis/COMpad4.cis
-		# serial_cs (GPL-3)
-		cis/SW_555_SER.cis
-		cis/SW_7xx_SER.cis
-		cis/SW_8xx_SER.cis
-		# dvb-ttpci (GPL-2+)
-		av7110/bootcode.bin
-		# usbdux, usbduxfast, usbduxsigma (GPL-2+)
-		usbdux_firmware.bin
-		usbduxfast_firmware.bin
-		usbduxsigma_firmware.bin
-		# brcmfmac (GPL-2+)
-		brcm/brcmfmac4330-sdio.Prowise-PT301.txt
-		brcm/brcmfmac43340-sdio.meegopad-t08.txt
-		brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt
-		brcm/brcmfmac43362-sdio.lemaker,bananapro.txt
-		brcm/brcmfmac43430a0-sdio.jumper-ezpad-mini3.txt
-		"brcm/brcmfmac43430a0-sdio.ONDA-V80 PLUS.txt"
-		brcm/brcmfmac43430-sdio.AP6212.txt
-		brcm/brcmfmac43430-sdio.Hampoo-D2D3_Vi8A1.txt
-		brcm/brcmfmac43430-sdio.MUR1DX.txt
-		brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.txt
-		brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt
-		brcm/brcmfmac4356-pcie.gpd-win-pocket.txt
-		# isci (GPL-2)
-		isci/isci_firmware.bin
-		# carl9170 (GPL-2+)
-		carl9170-1.fw
-		# atusb (GPL-2+)
-		atusb/atusb-0.2.dfu
-		atusb/atusb-0.3.dfu
-		atusb/rzusb-0.3.bin
-		# mlxsw_spectrum (dual BSD/GPL-2)
-		mellanox/mlxsw_spectrum-13.1420.122.mfa2
-		mellanox/mlxsw_spectrum-13.1530.152.mfa2
-		mellanox/mlxsw_spectrum-13.1620.192.mfa2
-		mellanox/mlxsw_spectrum-13.1702.6.mfa2
-		mellanox/mlxsw_spectrum-13.1703.4.mfa2
-		mellanox/mlxsw_spectrum-13.1910.622.mfa2
-		mellanox/mlxsw_spectrum-13.2000.1122.mfa2
-	)
-
-	# blacklist of images with unknown license
-	local unknown_license=(
-		korg/k1212.dsp
-		ess/maestro3_assp_kernel.fw
-		ess/maestro3_assp_minisrc.fw
-		yamaha/ds1_ctrl.fw
-		yamaha/ds1_dsp.fw
-		yamaha/ds1e_ctrl.fw
-		ttusb-budget/dspbootcode.bin
-		emi62/bitstream.fw
-		emi62/loader.fw
-		emi62/midi.fw
-		emi62/spdif.fw
-		ti_3410.fw
-		ti_5052.fw
-		mts_mt9234mu.fw
-		mts_mt9234zba.fw
-		whiteheat.fw
-		whiteheat_loader.fw
-		cpia2/stv0672_vp4.bin
-		vicam/firmware.fw
-		edgeport/boot.fw
-		edgeport/boot2.fw
-		edgeport/down.fw
-		edgeport/down2.fw
-		edgeport/down3.bin
-		sb16/mulaw_main.csp
-		sb16/alaw_main.csp
-		sb16/ima_adpcm_init.csp
-		sb16/ima_adpcm_playback.csp
-		sb16/ima_adpcm_capture.csp
-		sun/cassini.bin
-		acenic/tg1.bin
-		acenic/tg2.bin
-		adaptec/starfire_rx.bin
-		adaptec/starfire_tx.bin
-		yam/1200.bin
-		yam/9600.bin
-		ositech/Xilinx7OD.bin
-		qlogic/isp1000.bin
-		myricom/lanai.bin
-		yamaha/yss225_registers.bin
-		lgs8g75.fw
-	)
-
-	if use !unknown-license; then
-		einfo "Removing files with unknown license ..."
-		rm -v "${unknown_license[@]}" || die
-	fi
-
-	if use !redistributable; then
-		# remove files _not_ in the free_software or unknown_license lists
-		# everything else is confirmed (or assumed) to be redistributable
-		# based on upstream acceptance policy
-		einfo "Removing non-redistributable files ..."
-		local OLDIFS="${IFS}"
-		local IFS=$'\n'
-		set -o pipefail
-		find ! -type d -printf "%P\n" \
-			| grep -Fvx -e "${misc_files[*]}" -e "${free_software[*]}" -e "${unknown_license[*]}" \
-			| xargs -d '\n' --no-run-if-empty rm -v
-
-		[[ ${?} -ne 0 ]] && die "Failed to remove non-redistributable files"
-
-		IFS="${OLDIFS}"
-	fi
-
-	restore_config ${PN}.conf
-}
-
-src_install() {
-	./copy-firmware.sh -v "${ED}/lib/firmware" || die
-
-	pushd "${ED}/lib/firmware" &>/dev/null || die
-
-	# especially use !redistributable will cause some broken symlinks
-	einfo "Removing broken symlinks ..."
-	find * -xtype l -print -delete || die
-
-	if use savedconfig; then
-		if [[ -s "${S}/${PN}.conf" ]]; then
-			local files_to_keep="${T}/files_to_keep.lst"
-			grep -v '^#' "${S}/${PN}.conf" 2>/dev/null > "${files_to_keep}" || die
-			[[ -s "${files_to_keep}" ]] || die "grep failed, empty config file?"
-
-			einfo "Applying USE=savedconfig; Removing all files not listed in config ..."
-			find ! -type d -printf "%P\n" \
-				| grep -Fvx -f "${files_to_keep}" \
-				| xargs -d '\n' --no-run-if-empty rm -v
-
-			if [[ ${PIPESTATUS[0]} -ne 0 ]]; then
-				die "Find failed to print installed files"
-			elif [[ ${PIPESTATUS[1]} -eq 2 ]]; then
-				# grep returns exit status 1 if no lines were selected
-				# which is the case when we want to keep all files
-				die "Grep failed to select files to keep"
-			elif [[ ${PIPESTATUS[2]} -ne 0 ]]; then
-				die "Failed to remove files not listed in config"
-			fi
-		fi
-	fi
-
-	# remove empty directories, bug #396073
-	find -type d -empty -delete || die
-
-	# sanity check
-	if ! ( shopt -s failglob; : * ) 2>/dev/null; then
-		eerror "No files to install. Check your USE flag settings"
-		eerror "and the list of files in your saved configuration."
-		die "Refusing to install an empty package"
-	fi
-
-	# create config file
-	echo "# Remove files that shall not be installed from this list." > "${S}"/${PN}.conf || die
-	find * ! -type d >> "${S}"/${PN}.conf || die
-	save_config "${S}"/${PN}.conf
-
-	if use compress ; then
-		while IFS= read -r -d '' f; do
-			target=$(readlink "${f}")
-			ln -sf "${target}".xz "${f}" || die
-			mv "${f}" "${f}".xz || die
-		done < <(find . -type l -print0) || die
-
-		find . -type f ! -path "./amd-ucode/*" -print0 | \
-			xargs -0 -P $(makeopts_jobs) -I'{}' xz -T1 -C crc32 '{}' || die
-	fi
-
-	popd &>/dev/null || die
-
-	if use initramfs ; then
-		insinto /boot
-		doins "${S}"/amd-uc.img
-	fi
-}
-
-pkg_preinst() {
-	if use savedconfig; then
-		ewarn "USE=savedconfig is active. You must handle file collisions manually."
-	fi
-
-	# Fix 'symlink is blocked by a directory' Bug #871315
-	if has_version "<${CATEGORY}/${PN}-20220913-r2" ; then
-		rm -rf "${EROOT}"/lib/firmware/qcom/LENOVO/21BX
-	fi
-
-	# Make sure /boot is available if needed.
-	use initramfs && mount-boot_pkg_preinst
-}
-
-pkg_postinst() {
-	elog "If you are only interested in particular firmware files, edit the saved"
-	elog "configfile and remove those that you do not want."
-
-	local ver
-	for ver in ${REPLACING_VERSIONS}; do
-		if ver_test ${ver} -lt 20190514; then
-			elog
-			elog 'Starting with version 20190514, installation of many firmware'
-			elog 'files is controlled by USE flags. Please review your USE flag'
-			elog 'and package.license settings if you are missing some files.'
-			break
-		fi
-	done
-
-	# Don't forget to umount /boot if it was previously mounted by us.
-	use initramfs && mount-boot_pkg_postinst
-}
-
-pkg_prerm() {
-	# Make sure /boot is mounted so that we can remove /boot/amd-uc.img!
-	use initramfs && mount-boot_pkg_prerm
-}
-
-pkg_postrm() {
-	# Don't forget to umount /boot if it was previously mounted by us.
-	use initramfs && mount-boot_pkg_postrm
-}