diff options
Diffstat (limited to 'sys-devel/llvm/llvm-18.0.0_pre20230906.ebuild')
| -rw-r--r-- | sys-devel/llvm/llvm-18.0.0_pre20230906.ebuild | 539 |
1 files changed, 0 insertions, 539 deletions
diff --git a/sys-devel/llvm/llvm-18.0.0_pre20230906.ebuild b/sys-devel/llvm/llvm-18.0.0_pre20230906.ebuild deleted file mode 100644 index 6e07e59a22ce..000000000000 --- a/sys-devel/llvm/llvm-18.0.0_pre20230906.ebuild +++ /dev/null @@ -1,539 +0,0 @@ -# Copyright 1999-2023 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=8 - -PYTHON_COMPAT=( python3_{10..12} ) - -inherit cmake llvm.org multilib-minimal pax-utils python-any-r1 -inherit toolchain-funcs - -DESCRIPTION="Low Level Virtual Machine" -HOMEPAGE="https://llvm.org/" - -# Additional licenses: -# 1. OpenBSD regex: Henry Spencer's license ('rc' in Gentoo) + BSD. -# 2. xxhash: BSD. -# 3. MD5 code: public-domain. -# 4. ConvertUTF.h: TODO. - -LICENSE="Apache-2.0-with-LLVM-exceptions UoI-NCSA BSD public-domain rc" -SLOT="${LLVM_MAJOR}/${LLVM_SOABI}" -KEYWORDS="" -IUSE=" - +binutils-plugin +debug debuginfod doc exegesis libedit +libffi - ncurses test xar xml z3 zstd -" -RESTRICT="!test? ( test )" - -RDEPEND=" - sys-libs/zlib:0=[${MULTILIB_USEDEP}] - debuginfod? ( - net-misc/curl:= - dev-cpp/cpp-httplib:= - ) - exegesis? ( dev-libs/libpfm:= ) - libedit? ( dev-libs/libedit:0=[${MULTILIB_USEDEP}] ) - libffi? ( >=dev-libs/libffi-3.0.13-r1:0=[${MULTILIB_USEDEP}] ) - ncurses? ( >=sys-libs/ncurses-5.9-r3:0=[${MULTILIB_USEDEP}] ) - xar? ( app-arch/xar ) - xml? ( dev-libs/libxml2:2=[${MULTILIB_USEDEP}] ) - z3? ( >=sci-mathematics/z3-4.7.1:0=[${MULTILIB_USEDEP}] ) - zstd? ( app-arch/zstd:=[${MULTILIB_USEDEP}] ) -" -DEPEND=" - ${RDEPEND} - binutils-plugin? ( sys-libs/binutils-libs ) -" -BDEPEND=" - ${PYTHON_DEPS} - dev-lang/perl - >=dev-util/cmake-3.16 - sys-devel/gnuconfig - kernel_Darwin? ( - <sys-libs/libcxx-${LLVM_VERSION}.9999 - >=sys-devel/binutils-apple-5.1 - ) - doc? ( $(python_gen_any_dep ' - dev-python/recommonmark[${PYTHON_USEDEP}] - dev-python/sphinx[${PYTHON_USEDEP}] - ') ) - libffi? ( virtual/pkgconfig ) -" -# There are no file collisions between these versions but having :0 -# installed means llvm-config there will take precedence. -RDEPEND=" - ${RDEPEND} - !sys-devel/llvm:0 -" -PDEPEND=" - sys-devel/llvm-common - sys-devel/llvm-toolchain-symlinks:${LLVM_MAJOR} - binutils-plugin? ( >=sys-devel/llvmgold-${LLVM_MAJOR} ) -" - -LLVM_COMPONENTS=( llvm cmake third-party ) -LLVM_MANPAGES=1 -LLVM_USE_TARGETS=provide -llvm.org_set_globals - -python_check_deps() { - use doc || return 0 - - python_has_version -b "dev-python/recommonmark[${PYTHON_USEDEP}]" && - python_has_version -b "dev-python/sphinx[${PYTHON_USEDEP}]" -} - -check_uptodate() { - local prod_targets=( - $(sed -n -e '/set(LLVM_ALL_TARGETS/,/)/p' CMakeLists.txt \ - | tail -n +2 | head -n -1) - ) - local all_targets=( - lib/Target/*/ - ) - all_targets=( "${all_targets[@]#lib/Target/}" ) - all_targets=( "${all_targets[@]%/}" ) - - local exp_targets=() i - for i in "${all_targets[@]}"; do - has "${i}" "${prod_targets[@]}" || exp_targets+=( "${i}" ) - done - - if [[ ${exp_targets[*]} != ${ALL_LLVM_EXPERIMENTAL_TARGETS[*]} ]]; then - eqawarn "ALL_LLVM_EXPERIMENTAL_TARGETS is outdated!" - eqawarn " Have: ${ALL_LLVM_EXPERIMENTAL_TARGETS[*]}" - eqawarn "Expected: ${exp_targets[*]}" - eqawarn - fi - - if [[ ${prod_targets[*]} != ${ALL_LLVM_PRODUCTION_TARGETS[*]} ]]; then - eqawarn "ALL_LLVM_PRODUCTION_TARGETS is outdated!" - eqawarn " Have: ${ALL_LLVM_PRODUCTION_TARGETS[*]}" - eqawarn "Expected: ${prod_targets[*]}" - fi -} - -check_distribution_components() { - if [[ ${CMAKE_MAKEFILE_GENERATOR} == ninja ]]; then - local all_targets=() my_targets=() l - cd "${BUILD_DIR}" || die - - while read -r l; do - if [[ ${l} == install-*-stripped:* ]]; then - l=${l#install-} - l=${l%%-stripped*} - - case ${l} in - # shared libs - LLVM|LLVMgold) - ;; - # TableGen lib + deps - LLVMDemangle|LLVMSupport|LLVMTableGen) - ;; - # testing libraries - LLVMTestingAnnotations|LLVMTestingSupport) - ;; - # static libs - LLVM*) - continue - ;; - # meta-targets - distribution|llvm-libraries) - continue - ;; - # used only w/ USE=doc - docs-llvm-html) - use doc || continue - ;; - esac - - all_targets+=( "${l}" ) - fi - done < <(${NINJA} -t targets all) - - while read -r l; do - my_targets+=( "${l}" ) - done < <(get_distribution_components $"\n") - - local add=() remove=() - for l in "${all_targets[@]}"; do - if ! has "${l}" "${my_targets[@]}"; then - add+=( "${l}" ) - fi - done - for l in "${my_targets[@]}"; do - if ! has "${l}" "${all_targets[@]}"; then - remove+=( "${l}" ) - fi - done - - if [[ ${#add[@]} -gt 0 || ${#remove[@]} -gt 0 ]]; then - eqawarn "get_distribution_components() is outdated!" - eqawarn " Add: ${add[*]}" - eqawarn "Remove: ${remove[*]}" - fi - cd - >/dev/null || die - fi -} - -src_prepare() { - # disable use of SDK on OSX, bug #568758 - sed -i -e 's/xcrun/false/' utils/lit/lit/util.py || die - - # Update config.guess to support more systems - cp "${BROOT}/usr/share/gnuconfig/config.guess" cmake/ || die - - # Verify that the ebuild is up-to-date - check_uptodate - - llvm.org_src_prepare -} - -get_distribution_components() { - local sep=${1-;} - - local out=( - # shared libs - LLVM - LTO - Remarks - - # tools - llvm-config - - # common stuff - cmake-exports - llvm-headers - - # libraries needed for clang-tblgen - LLVMDemangle - LLVMSupport - LLVMTableGen - - # testing libraries - llvm_gtest - llvm_gtest_main - LLVMTestingAnnotations - LLVMTestingSupport - ) - - if multilib_is_native_abi; then - out+=( - # utilities - llvm-tblgen - FileCheck - llvm-PerfectShuffle - count - not - yaml-bench - UnicodeNameMappingGenerator - - # tools - bugpoint - dsymutil - llc - lli - lli-child-target - llvm-addr2line - llvm-ar - llvm-as - llvm-bcanalyzer - llvm-bitcode-strip - llvm-c-test - llvm-cat - llvm-cfi-verify - llvm-config - llvm-cov - llvm-cvtres - llvm-cxxdump - llvm-cxxfilt - llvm-cxxmap - llvm-debuginfo-analyzer - llvm-debuginfod-find - llvm-diff - llvm-dis - llvm-dlltool - llvm-dwarfdump - llvm-dwarfutil - llvm-dwp - llvm-exegesis - llvm-extract - llvm-gsymutil - llvm-ifs - llvm-install-name-tool - llvm-jitlink - llvm-jitlink-executor - llvm-lib - llvm-libtool-darwin - llvm-link - llvm-lipo - llvm-lto - llvm-lto2 - llvm-mc - llvm-mca - llvm-ml - llvm-modextract - llvm-mt - llvm-nm - llvm-objcopy - llvm-objdump - llvm-opt-report - llvm-otool - llvm-pdbutil - llvm-profdata - llvm-profgen - llvm-ranlib - llvm-rc - llvm-readelf - llvm-readobj - llvm-readtapi - llvm-reduce - llvm-remarkutil - llvm-rtdyld - llvm-sim - llvm-size - llvm-split - llvm-stress - llvm-strings - llvm-strip - llvm-symbolizer - llvm-tli-checker - llvm-undname - llvm-windres - llvm-xray - obj2yaml - opt - sancov - sanstats - split-file - verify-uselistorder - yaml2obj - - # python modules - opt-viewer - ) - - if llvm_are_manpages_built; then - out+=( - # manpages - docs-dsymutil-man - docs-llvm-dwarfdump-man - docs-llvm-man - ) - fi - use doc && out+=( - docs-llvm-html - ) - - use binutils-plugin && out+=( - LLVMgold - ) - use debuginfod && out+=( - llvm-debuginfod - ) - fi - - printf "%s${sep}" "${out[@]}" -} - -multilib_src_configure() { - local ffi_cflags ffi_ldflags - if use libffi; then - ffi_cflags=$($(tc-getPKG_CONFIG) --cflags-only-I libffi) - ffi_ldflags=$($(tc-getPKG_CONFIG) --libs-only-L libffi) - fi - - local libdir=$(get_libdir) - local mycmakeargs=( - # disable appending VCS revision to the version to improve - # direct cache hit ratio - -DLLVM_APPEND_VC_REV=OFF - -DCMAKE_INSTALL_PREFIX="${EPREFIX}/usr/lib/llvm/${LLVM_MAJOR}" - -DLLVM_LIBDIR_SUFFIX=${libdir#lib} - - -DBUILD_SHARED_LIBS=OFF - -DLLVM_BUILD_LLVM_DYLIB=ON - -DLLVM_LINK_LLVM_DYLIB=ON - -DLLVM_DISTRIBUTION_COMPONENTS=$(get_distribution_components) - - # cheap hack: LLVM combines both anyway, and the only difference - # is that the former list is explicitly verified at cmake time - -DLLVM_TARGETS_TO_BUILD="" - -DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD="${LLVM_TARGETS// /;}" - -DLLVM_INCLUDE_BENCHMARKS=OFF - -DLLVM_INCLUDE_TESTS=ON - -DLLVM_BUILD_TESTS=$(usex test) - -DLLVM_INSTALL_GTEST=ON - - -DLLVM_ENABLE_FFI=$(usex libffi) - -DLLVM_ENABLE_LIBEDIT=$(usex libedit) - -DLLVM_ENABLE_TERMINFO=$(usex ncurses) - -DLLVM_ENABLE_LIBXML2=$(usex xml) - -DLLVM_ENABLE_ASSERTIONS=$(usex debug) - -DLLVM_ENABLE_LIBPFM=$(usex exegesis) - -DLLVM_ENABLE_EH=ON - -DLLVM_ENABLE_RTTI=ON - -DLLVM_ENABLE_Z3_SOLVER=$(usex z3) - -DLLVM_ENABLE_ZSTD=$(usex zstd) - -DLLVM_ENABLE_CURL=$(usex debuginfod) - -DLLVM_ENABLE_HTTPLIB=$(usex debuginfod) - - -DLLVM_HOST_TRIPLE="${CHOST}" - - -DFFI_INCLUDE_DIR="${ffi_cflags#-I}" - -DFFI_LIBRARY_DIR="${ffi_ldflags#-L}" - # used only for llvm-objdump tool - -DLLVM_HAVE_LIBXAR=$(multilib_native_usex xar 1 0) - - -DPython3_EXECUTABLE="${PYTHON}" - - # disable OCaml bindings (now in dev-ml/llvm-ocaml) - -DOCAMLFIND=NO - ) - - local suffix= - if [[ -n ${EGIT_VERSION} && ${EGIT_BRANCH} != release/* ]]; then - # the ABI of the main branch is not stable, so let's include - # the commit id in the SOVERSION to contain the breakage - suffix+="git${EGIT_VERSION::8}" - fi - if [[ $(tc-get-cxx-stdlib) == libc++ ]]; then - # Smart hack: alter version suffix -> SOVERSION when linking - # against libc++. This way we won't end up mixing LLVM libc++ - # libraries with libstdc++ clang, and the other way around. - suffix+="+libcxx" - mycmakeargs+=( - -DLLVM_ENABLE_LIBCXX=ON - ) - fi - mycmakeargs+=( - -DLLVM_VERSION_SUFFIX="${suffix}" - ) - - use test && mycmakeargs+=( - -DLLVM_LIT_ARGS="$(get_lit_flags)" - ) - - if multilib_is_native_abi; then - local build_docs=OFF - if llvm_are_manpages_built; then - build_docs=ON - mycmakeargs+=( - -DCMAKE_INSTALL_MANDIR="${EPREFIX}/usr/lib/llvm/${LLVM_MAJOR}/share/man" - -DLLVM_INSTALL_SPHINX_HTML_DIR="${EPREFIX}/usr/share/doc/${PF}/html" - -DSPHINX_WARNINGS_AS_ERRORS=OFF - ) - fi - - mycmakeargs+=( - -DLLVM_BUILD_DOCS=${build_docs} - -DLLVM_ENABLE_OCAMLDOC=OFF - -DLLVM_ENABLE_SPHINX=${build_docs} - -DLLVM_ENABLE_DOXYGEN=OFF - -DLLVM_INSTALL_UTILS=ON - ) - use binutils-plugin && mycmakeargs+=( - -DLLVM_BINUTILS_INCDIR="${EPREFIX}"/usr/include - ) - fi - - # On Macos prefix, Gentoo doesn't split sys-libs/ncurses to libtinfo and - # libncurses, but llvm tries to use libtinfo before libncurses, and ends up - # using libtinfo (actually, libncurses.dylib) from system instead of prefix - use kernel_Darwin && mycmakeargs+=( - -DTerminfo_LIBRARIES=-lncurses - ) - - # workaround BMI bug in gcc-7 (fixed in 7.4) - # https://bugs.gentoo.org/649880 - # apply only to x86, https://bugs.gentoo.org/650506 - if tc-is-gcc && [[ ${MULTILIB_ABI_FLAG} == abi_x86* ]] && - [[ $(gcc-major-version) -eq 7 && $(gcc-minor-version) -lt 4 ]] - then - local CFLAGS="${CFLAGS} -mno-bmi" - local CXXFLAGS="${CXXFLAGS} -mno-bmi" - fi - - # LLVM can have very high memory consumption while linking, - # exhausting the limit on 32-bit linker executable - use x86 && local -x LDFLAGS="${LDFLAGS} -Wl,--no-keep-memory" - - # LLVM_ENABLE_ASSERTIONS=NO does not guarantee this for us, #614844 - use debug || local -x CPPFLAGS="${CPPFLAGS} -DNDEBUG" - cmake_src_configure - - grep -q -E "^CMAKE_PROJECT_VERSION_MAJOR(:.*)?=${LLVM_MAJOR}$" \ - CMakeCache.txt || - die "Incorrect version, did you update _LLVM_MAIN_MAJOR?" - multilib_is_native_abi && check_distribution_components -} - -multilib_src_compile() { - tc-env_build cmake_build distribution - - pax-mark m "${BUILD_DIR}"/bin/llvm-rtdyld - pax-mark m "${BUILD_DIR}"/bin/lli - pax-mark m "${BUILD_DIR}"/bin/lli-child-target - - if use test; then - pax-mark m "${BUILD_DIR}"/unittests/ExecutionEngine/Orc/OrcJITTests - pax-mark m "${BUILD_DIR}"/unittests/ExecutionEngine/MCJIT/MCJITTests - pax-mark m "${BUILD_DIR}"/unittests/Support/SupportTests - fi -} - -multilib_src_test() { - # respect TMPDIR! - local -x LIT_PRESERVES_TMP=1 - cmake_build check -} - -src_install() { - local MULTILIB_CHOST_TOOLS=( - /usr/lib/llvm/${LLVM_MAJOR}/bin/llvm-config - ) - - local MULTILIB_WRAPPED_HEADERS=( - /usr/include/llvm/Config/llvm-config.h - ) - - local LLVM_LDPATHS=() - multilib-minimal_src_install - - # move wrapped headers back - mv "${ED}"/usr/include "${ED}"/usr/lib/llvm/${LLVM_MAJOR}/include || die -} - -multilib_src_install() { - DESTDIR=${D} cmake_build install-distribution - - # move headers to /usr/include for wrapping - rm -rf "${ED}"/usr/include || die - mv "${ED}"/usr/lib/llvm/${LLVM_MAJOR}/include "${ED}"/usr/include || die - - LLVM_LDPATHS+=( "${EPREFIX}/usr/lib/llvm/${LLVM_MAJOR}/$(get_libdir)" ) -} - -multilib_src_install_all() { - local revord=$(( 9999 - ${LLVM_MAJOR} )) - newenvd - "60llvm-${revord}" <<-_EOF_ - PATH="${EPREFIX}/usr/lib/llvm/${LLVM_MAJOR}/bin" - # we need to duplicate it in ROOTPATH for Portage to respect... - ROOTPATH="${EPREFIX}/usr/lib/llvm/${LLVM_MAJOR}/bin" - MANPATH="${EPREFIX}/usr/lib/llvm/${LLVM_MAJOR}/share/man" - LDPATH="$( IFS=:; echo "${LLVM_LDPATHS[*]}" )" - _EOF_ - - docompress "/usr/lib/llvm/${LLVM_MAJOR}/share/man" - llvm_install_manpages -} - -pkg_postinst() { - elog "You can find additional opt-viewer utility scripts in:" - elog " ${EROOT}/usr/lib/llvm/${LLVM_MAJOR}/share/opt-viewer" - elog "To use these scripts, you will need Python along with the following" - elog "packages:" - elog " dev-python/pygments (for opt-viewer)" - elog " dev-python/pyyaml (for all of them)" -} |